Date: Fri, 15 Nov 2002 16:00:42 +0100 (MET) From: Svein Halvor Halvorsen <sveinhal+fbsd-lists@stud.fim.ntnu.no> To: questions@freebsd.org Subject: Problems width ESS1869 and 5.0-CURRENT Message-ID: <Pine.GSO.4.44.0211151553250.14979-500000@lastebil.math.ntnu.no>
index | next in thread | raw e-mail
[-- Attachment #1 --] Hi! I just cvsup-ed the -current branch the other day and rebuilt my kernel. I did this to have support for my FujiFilm FinePix 2800z-camera as a USB mass storage device. But since then my soundcard won't work! It shows up in during boot, and has the right nodes in /dev, but whenever I try to play a sound, the first tone freezes and the computer hangs. Nothing responds, and I have to hit the reset-button. I used to have option PNPBIOS in my kernel, but now I get 'option not supported' or something like that. It's an onboard Compaq OEM ESS1869 soundcard. Attached is my dmesg-output, /dev/sndstat, kernel configuration file and the hints file. Thanks in advance for any help. Svein Halvor [-- Attachment #2 --] # $FreeBSD: src/sys/i386/conf/GENERIC.hints,v 1.10 2002/10/22 17:32:27 jhb Exp $ hint.fdc.0.at="isa" hint.fdc.0.port="0x3F0" hint.fdc.0.irq="6" hint.fdc.0.drq="2" hint.fd.0.at="fdc0" hint.fd.0.drive="0" hint.fd.1.at="fdc0" hint.fd.1.drive="1" hint.ata.0.at="isa" hint.ata.0.port="0x1F0" hint.ata.0.irq="14" hint.ata.1.at="isa" hint.ata.1.port="0x170" hint.ata.1.irq="15" hint.adv.0.at="isa" hint.bt.0.at="isa" hint.aha.0.at="isa" hint.aic.0.at="isa" hint.atkbdc.0.at="isa" hint.atkbdc.0.port="0x060" hint.atkbd.0.at="atkbdc" hint.atkbd.0.irq="1" hint.atkbd.0.flags="0x1" hint.psm.0.at="atkbdc" hint.psm.0.irq="12" hint.vga.0.at="isa" hint.sc.0.at="isa" hint.sc.0.flags="0x100" hint.vt.0.at="isa" hint.apm.0.disabled="1" hint.apm.0.flags="0x20" hint.pcic.0.at="isa" # hint.pcic.0.irq="10" # Default to polling hint.pcic.0.port="0x3e0" hint.pcic.0.maddr="0xd0000" hint.pcic.1.at="isa" hint.pcic.1.irq="11" hint.pcic.1.port="0x3e2" hint.pcic.1.maddr="0xd4000" hint.pcic.1.disabled="1" hint.sio.0.at="isa" hint.sio.0.port="0x3F8" hint.sio.0.flags="0x10" hint.sio.0.irq="4" hint.sio.1.at="isa" hint.sio.1.port="0x2F8" hint.sio.1.irq="3" hint.sio.2.at="isa" hint.sio.2.disabled="1" hint.sio.2.port="0x3E8" hint.sio.2.irq="5" hint.sio.3.at="isa" hint.sio.3.disabled="1" hint.sio.3.port="0x2E8" hint.sio.3.irq="9" hint.ppc.0.at="isa" hint.ppc.0.irq="7" hint.ed.0.at="isa" hint.ed.0.port="0x280" hint.ed.0.irq="10" hint.ed.0.maddr="0xd8000" hint.cs.0.at="isa" hint.cs.0.port="0x300" hint.sn.0.at="isa" hint.sn.0.port="0x300" hint.sn.0.irq="10" hint.ie.0.at="isa" hint.ie.0.port="0x300" hint.ie.0.irq="10" hint.ie.0.maddr="0xd0000" hint.fe.0.at="isa" hint.fe.0.port="0x300" hint.le.0.at="isa" hint.le.0.port="0x300" hint.le.0.irq="5" hint.le.0.maddr="0xd0000" hint.lnc.0.at="isa" hint.lnc.0.port="0x280" hint.lnc.0.irq="10" hint.lnc.0.drq="0" [-- Attachment #3 --] # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.369 2002/10/19 16:54:07 rwatson Exp $ machine i386 cpu I686_CPU ident MIRRORBALL maxusers 0 #To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" #Default places to look for devices. #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options MD_ROOT #MD is a potential root device options NFSCLIENT #Network Filesystem Client options NFSSERVER #Network Filesystem Server options NFS_ROOT #NFS usable as root device, requires NFSCLIENT options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible with FreeBSD4 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. # Debugging for use in -current #options DDB #Enable the kernel debugger #options INVARIANTS #Enable calls of extra sanity checking #options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS #Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device ahd # AHA39320/29320 and onboard AIC79xx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') #device adv # Advansys SCSI adapters #device adw # Advansys wide SCSI adapters #device aha # Adaptec 154x SCSI adapters #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. #device bt # Buslogic/Mylex MultiMaster SCSI adapters #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options! #device iir # Intel Integrated RAID #device mly # Mylex AcceleRAID/eXtremeRAID # SCSI peripherals device scbus # SCSI bus (required) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers #device aac # Adaptec FSA RAID #device aacp # SCSI passthrough for aac (requires CAM) #device amr # AMI MegaRAID #device ida # Compaq Smart RAID #device mlx # Mylex DAC960 family #device pst # Promise Supertrak SX6000 #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # Pcmcia and cardbus bridge support #device cbb # cardbus (yenta) bridge #device pcic # ExCA ISA and PCI bridges #device pccard # PC Card (16-bit) bus #device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 adapter Gigabit Ethernet Card #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard nics included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device lnc # NE2100, NE32-VL Lance Ethernet cards #device sn # SMC's 9000 series of ethernet chips #device xe # Xircom pccard ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards #device an # Aironet 4500/4800 802.11 wireless NICs. #device awi # BayStack 660 and others #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices - the number indicates how many units to allocate. device random # Entropy device device loop # Network loopback device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device urio # Diamond Rio 500 MP3 player device uscanner # Scanners # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet # Additions by sveinhal options NETSMB options NETSMBCRYPTO options LIBICONV options LIBMCHAIN options HZ=500 device pcm device midi device seq [-- Attachment #4 --] FreeBSD Audio Driver (newpcm) Installed devices: pcm0: <ESS 1869 DSP> at io 0x220 irq 5 drq 1:3 bufsz 4096 (1p/1r/0v channels duplex default) [-- Attachment #5 --] Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #2: Mon Nov 11 01:26:31 CET 2002 sveinhal@mirrorball:/usr/obj/usr/src/sys/MIRRORBALL Preloaded elf kernel "/boot/kernel/kernel" at 0xc051a000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc051a0a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 347664986 Hz CPU: Pentium II/Pentium II Xeon/Celeron (347.66-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x651 Stepping = 1 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 67108864 (64 MB) avail memory = 59711488 (56 MB) Initializing GEOMetry subsystem netsmb_dev: loaded Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface Using $PIR table, 5 entries at 0xc00fa040 pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x44000000-0x47ffffff at device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0x2400-0x24ff mem 0x41100000-0x411000ff irq 11 at device 3.0 on pci0 rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode rl0: Ethernet address: 00:e0:29:67:06:2b miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 20.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x2020-0x202f at device 20.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2000-0x201f irq 11 at device 20.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 20.3 (no driver attached) orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: IEEE1284 device found /NIBBLE/ECP Probing for PnP devices on ppbus0: ppbus0: <HEWLETT-PACKARD DESKJET 710C> SCP,VLINK plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus0 vpo0: EPP mode sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0400> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) sbc0: <ESS ES1869 (Compaq OEM)> at port 0x330-0x331,0x388-0x38b,0x220-0x22f irq 5 drq 3,1 on isa0 pcm0: <ESS 18xx DSP> on sbc0 midi0: <SB Midi Interface> on sbc0 midi1: <SB OPL FM Synthesizer> on sbc0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0303> can't assign resources (port) unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0c02> can't assign resources (port) Timecounters tick every 2.000 msec ad0: 19092MB <WDC WD200AB-00CDB0> [38792/16/63] at ata0-master UDMA33 ad3: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata1-slave UDMA33 acd0: DVD-ROM <LG DVD-ROM DRD-8160B> at ata0-slave UDMA33 MBREXT Slice 5 on ad3s1: 0000 00 01 01 01 0b ef ff ff 3f 00 00 00 c1 a5 50 09 |........?.....P.| [0] f:00 typ:11 s(CHS):1/1/1 e(CHS):255/239/255 s:63 l:156280257 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 da0 at vpo0 bus 0 target 6 lun 0 da0: <IOMEGA ZIP 100 L.01> Removable Direct Access SCSI-2 device da0: Attempt to query device size failed: NOT READY, Medium not present (da0:vpo0:0:6:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:vpo0:0:6:0): CAM Status: SCSI Status Error (da0:vpo0:0:6:0): SCSI Status: Check Condition (da0:vpo0:0:6:0): NOT READY asc:3a,0 (da0:vpo0:0:6:0): Medium not present (da0:vpo0:0:6:0): Unretryable error Opened disk da0 -> 6 (da0:vpo0:0:6:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:vpo0:0:6:0): CAM Status: SCSI Status Error (da0:vpo0:0:6:0): SCSI Status: Check Condition (da0:vpo0:0:6:0): NOT READY asc:3a,0 (da0:vpo0:0:6:0): Medium not present (da0:vpo0:0:6:0): Unretryable error Opened disk da0 -> 6 Mounting root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismountedhelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.44.0211151553250.14979-500000>