Date: Sun, 14 Apr 2002 12:29:12 +0200 (CEST) From: Alexander Leidinger <Alexander@Leidinger.net> To: mobile@FreeBSD.org Subject: ORiNOCO PC Card supported in -stable or -current? Message-ID: <200204141029.g3EATDJx086990@Magelan.Leidinger.net>
next in thread | raw e-mail | index | archive | help
--0-1804289383-1018780159=:530 Content-Type: TEXT/plain; charset=us-ascii Hi, please keep me in the CC, thanks. I've got an OEM version of an "ORiNOCO PC Card" for my desktop system. At least the linux driver tells me it is an "ORiNOCO PC Card" in it's man page and in the source (and it refers to http://www.orinocowireless.com). I've attached the "pccardc dumpcis" output. Is this card supported (either in -stable or in -current) and what do I have to do to have it set up by pccardd upon insertion into the PCMCIA bridge? Bye, Alexander. -- The dark ages were caused by the Y1K problem. http://www.Leidinger.net Alexander @ Leidinger.net GPG fingerprint = C518 BC70 E67F 143F BE91 3365 79E2 9C60 B006 3FE7 --0-1804289383-1018780159=:530 Content-Type: TEXT/plain; name="pccard.txt" Content-Disposition: attachment; filename="pccard.txt" Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: 00 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = 512b, 1 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 4 000: 67 5a 08 ff Attribute memory device information: Device number 1, type SRAM, WPS = OFF Speed = 5.0 x 100 ns, Memory block size = 512b, 2 units Tuple #3, code = 0x1d (Other conditions for attribute memory), length = 5 000: 01 67 5a 08 ff (MWAIT) Tuple #4, code = 0x1c (Other conditions for common memory), length = 4 000: 01 00 00 ff (MWAIT) Tuple #5, code = 0x15 (Version 1 info), length = 39 000: 05 00 20 00 49 45 45 45 20 38 30 32 2e 31 31 20 010: 57 69 72 65 6c 65 73 73 20 4c 41 4e 2f 50 43 20 020: 43 61 72 64 00 00 ff Version = 5.0, Manuf = [ ], card vers = [IEEE 802.11 Wireless LAN/PC Card] Addit. info = [] Tuple #6, code = 0x20 (Manufacturer ID), length = 4 000: 01 d6 02 00 PCMCIA ID = 0xd601, OEM ID = 0x2 Tuple #7, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #8, code = 0x22 (Functional EXT), length = 2 000: 01 07 Network technology: Wireless Tuple #9, code = 0x22 (Functional EXT), length = 5 000: 02 40 42 0f 00 Network speed: 1 Mb/sec Tuple #10, code = 0x22 (Functional EXT), length = 5 000: 02 80 84 1e 00 Network speed: 2 Mb/sec Tuple #11, code = 0x22 (Functional EXT), length = 2 000: 03 07 Network media: 2.4 GHz Tuple #12, code = 0x22 (Functional EXT), length = 2 000: 05 01 Network connector: closed connector standard Tuple #13, code = 0x1a (Configuration map), length = 7 000: 03 02 e0 03 00 00 01 Reg len = 4, config register addr = 0x3e0, last config = 0x2 Registers: X------- Tuple #14, code = 0x1b (Configuration entry), length = 16 000: c1 01 19 77 55 c5 4b d5 19 36 36 05 46 7f ff ff Config index = 0x1(default) Interface byte = 0x1 (I/O) Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4 x 1V, ext = 0x4b Maximum operating supply voltage: 5 x 1V, ext = 0x19 Max current average over 1 second: 3 x 100mA Max current average over 10 ms: 3 x 100mA Power down supply current: 1 x 10mA Card decodes 6 address lines, limited 8/16 Bit I/O IRQ modes: Level, Pulse IRQs: NMI IOCK BERR VEND 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Tuple #15, code = 0xff (Terminator), length = 0 1 slots found --0-1804289383-1018780159=:530-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200204141029.g3EATDJx086990>