Date: Fri, 17 Sep 2004 21:09:51 -0400 From: Mike Tancsa <mike@sentex.net> To: freebsd-current@freebsd.org Subject: ICH6 (Intel 915 support) Message-ID: <6.1.2.0.0.20040917210537.04649508@64.7.153.2>
next in thread | raw e-mail | index | archive | help
Has anyone tried this board yet ? I just booted beta 3 with it and it
boots but with a few complaints and it doesnt see the onboard NIC.
none3@pci1:8:0: class=0x020000 card=0x04d6a0a0 chip=0x10648086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
class = network
subclass = ethernet
Anyone know what kind of Intel NIC it is ?
915# dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA3 #0: Sat Sep 4 12:07:48 UTC 2004
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2999.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 259981312 (247 MB)
avail memory = 244756480 (233 MB)
ACPI APIC Table: <AOpen AWRDACPI>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AOpen AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0xd000-0xd03f mem 0xd0020000-0xd003ffff,0xd0000000-0xd001ffff irq 16 at
device 0.0 on pci1
em0: Ethernet address: 00:0e:0c:5d:f7:c6
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0xd100-0xd13f mem 0xd0060000-0xd007ffff,0xd0040000-0xd005ffff irq 21 at
device 1.0 on pci1
em1: Ethernet address: 00:0e:0c:5d:f7:c0
em1: Speed:N/A Duplex:N/A
pci1: <network, ethernet> at device 8.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port
0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
orm0: <ISA Option ROMs> at iomem
0xcd000-0xcdfff,0xcc000-0xccfff,0xc0000-0xca7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2999674103 Hz quality 800
Timecounters tick every 10.000 msec
ad2: 114473MB <ST3120026AS/3.18> [232581/16/63] at ata1-master SATA150
Mounting root from ufs:/dev/ad2s1a
em0: Link is up 100 Mbps Full Duplex
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike@sentex.net
Providing Internet since 1994 www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.1.2.0.0.20040917210537.04649508>