Date: Wed, 12 Mar 2014 17:09:03 GMT From: Troyax <troyax@pholos.eu> To: freebsd-gnats-submit@FreeBSD.org Subject: amd64/187488: Freebsd 10 install kernel rebooting the machine. Message-ID: <201403121709.s2CH93XH010367@cgiserv.freebsd.org> Resent-Message-ID: <201403121710.s2CHA0h2017452@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 187488 >Category: amd64 >Synopsis: Freebsd 10 install kernel rebooting the machine. >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-amd64 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Mar 12 17:10:00 UTC 2014 >Closed-Date: >Last-Modified: >Originator: Troyax >Release: 10 >Organization: >Environment: NA >Description: When booting an install image of Freebsd 10 from an USB key (created as explained on the handbook), as it starts to boot the kernel my laptop suddenly reboot (I can't even clearly saw the "boot prompt" - before the numbers). But I could boot and install the 9.2 image without any problem; I joined my current (9.2) dmesg.boot (my laptop is a HP EliteBook Folio 9470m). As a side note, I also tried OpenBSD 5.4 which ended in the same reboot scenario - I just add few numbers (2 or 3 blocks) on my screen before the reboot. >How-To-Repeat: Boot a Freebsd 10 kernel from an USB key (no CD/DVD reader) on a HP EliteBook Folio 9470m (or at least mine). I would happily help with some tests, although I need my laptop to continue to work (so mainly image booting test - probably no installation at the moment). >Fix: Patch attached with submission follows: Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.2-RELEASE-p3 #0: Sat Jan 11 03:25:02 UTC 2014 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 gcc version 4.2.1 20070831 patched [FreeBSD] CPU: Intel(R) Core(TM) i5-3437U CPU @ 1.90GHz (2394.61-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x306a9 Family = 0x6 Model = 0x3a Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Standard Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB> TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8080982016 (7706 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <HPQOEM 18DF > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320) ioapic0 <Version 2.0> irqs 0-23 on motherboard Cuse4BSD v0.1.30 @ /dev/cuse kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-XTS> on motherboard acpi0: <HPQOEM SLIC-MPC> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: no PRT entry for 0.20.INTA vgapci0: <VGA-compatible display> port 0x2000-0x203f mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 agp0: <IvyBridge mobile GT2 IG> on vgapci0 agp0: aperture size is 256M, detected 65532k stolen memory xhci0: <Intel Panther Point USB 3.0 controller> mem 0xd0720000-0xd072ffff irq 10 at device 20.0 on pci0 xhci0: 32 byte context size. usbus0 on xhci0 pci0: <simple comms> at device 22.0 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x2080-0x209f mem 0xd0700000-0xd071ffff,0xd073b000-0xd073bfff irq 17 at device 25.0 on pci0 em0: Using an MSI interrupt em0: Ethernet address: XX:XX:XX:XX:XX:XX ehci0: <Intel Panther Point USB 2.0 controller> mem 0xd073a000-0xd073a3ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 hdac0: <Intel Panther Point HDA Controller> mem 0xd0730000-0xd0733fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <base peripheral> at device 0.0 (no driver attached) pci2: <base peripheral, SD host controller> at device 0.2 (no driver attached) pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) ehci1: <Intel Panther Point USB 2.0 controller> mem 0xd0739000-0xd07393ff irq 16 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Panther Point AHCI SATA controller> port 0x20a8-0x20af,0x20b4-0x20b7,0x20a0-0x20a7,0x20b0-0x20b3,0x2060-0x207f mem 0xd0738000-0xd07387ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_tz2: <Thermal Zone> on acpi0 acpi_tz3: <Thermal Zone> on acpi0 acpi_tz4: <Thermal Zone> on acpi0 acpi_tz5: <Thermal Zone> on acpi0 acpi_tz6: <Thermal Zone> on acpi0 acpi_tz7: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xd0000-0xd0fff on isa0 sc0: <System console> at flags 0x180 on isa0 sc0: VGA <16 virtual consoles, flags=0x380> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec vboxdrv: fAsync=0 offMin=0x3a2 offMax=0x5cb hdacc0: <IDT 92HD91BXX HDA CODEC> at cad 0 on hdac0 hdaa0: <IDT 92HD91BXX Audio Function Group> at nid 1 on hdacc0 pcm0: <IDT 92HD91BXX (Analog 2.0+HP/2.0)> at nid 13,11 and 12,15 on hdaa0 pcm1: <IDT 92HD91BXX (Analog)> at nid 10 and 17 on hdaa0 hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1 pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1 usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 480Mbps High Speed USB v2.0 ugen0.1: <0x8086> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <SAMSUNG MZ7PD256HAFV-000H7 DXM05H6Q> ATA-9 SATA 3.x device ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 244198MB (500118192 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1197304882 Hz quality 1000 Enter passphrase for ada0p3: uhub0: 8 ports with 8 removable, self powered ugen0.2: <SMSC> at usbus0 uhub3: <SMSC USB2134B, class 9/0, rev 2.10/50.00, addr 1> on usbus0 uhub3: MTT enabled uhub1: 3 ports with 3 removable, self powered uhub2: 3 ports with 3 removable, self powered uhub3: 4 ports with 4 removable, self powered ugen2.2: <vendor 0x8087> at usbus2 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 ugen1.2: <vendor 0x8087> at usbus1 uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 ugen0.3: <Logitech> at usbus0 ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 2> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 ugen0.4: <vendor 0x04f3> at usbus0 ukbd0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.05, addr 3> on usbus0 kbd2 at ukbd0 uhid0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.05, addr 3> on usbus0 uhub5: 6 ports with 6 removable, self powered uhub4: 8 ports with 8 removable, self powered ugen0.5: <SMSC> at usbus0 uhub6: <SMSC USB5534B, class 9/0, rev 3.00/50.00, addr 4> on usbus0 ugen1.3: <vendor 0x138a> at usbus1 uhub6: 4 ports with 4 removable, self powered ugen1.4: <Chicony Electronics Co.,Ltd.> at usbus1 GEOM_ELI: Device ada0p3.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware Trying to mount root from XXXXXXXXX []... >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201403121709.s2CH93XH010367>