Date: Thu, 07 Jul 2005 15:48:38 -0400 From: Evan Jones <evan.jones@tilcon.com> To: freebsd-questions@freebsd.org Subject: FreeBSD 5.4 and Sli 3114 sata controller broken? Message-ID: <42CD8716.8050204@tilcon.com>
next in thread | raw e-mail | index | archive | help
hey, I have a Tyan s2882 mainboard with an integrated SLI 3114 SATA RAID controler on board. I have four 120gig sata drives attached to it. I can succefully build a RAID 0, 1 or 10 in the BIOS, but the created RAID dosent seem to show up in Freebsd. The drives get detected but I can only seem to use them as individual drives and not a raid array. I can successfully create a raid using ATA control but from what I understand that is a software RAID only. Anyone know what is going on? I cant seem to find any info on Sli 3114 support in freebsd. Jul 7 14:06:56 greysrv syslogd: kernel boot file is /boot/kernel/kernel Jul 7 14:06:56 greysrv kernel: Copyright (c) 1992-2005 The FreeBSD Project. Jul 7 14:06:56 greysrv kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Jul 7 14:06:56 greysrv kernel: The Regents of the University of California. All rights reserved. Jul 7 14:06:56 greysrv kernel: FreeBSD 5.4-RELEASE #1: Wed Jun 15 23:13:01 EDT 2005 Jul 7 14:06:56 greysrv kernel: root@greysrv:/usr/src/sys/amd64/compile/GREYSRV Jul 7 14:06:56 greysrv kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Jul 7 14:06:56 greysrv kernel: CPU: AMD Opteron(tm) Processor 242 (1593.20-MHz K8-class CPU) Jul 7 14:06:56 greysrv kernel: Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10 Jul 7 14:06:56 greysrv kernel: Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Jul 7 14:06:56 greysrv kernel: AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow> Jul 7 14:06:56 greysrv kernel: real memory = 1073676288 (1023 MB) Jul 7 14:06:56 greysrv kernel: avail memory = 1027469312 (979 MB) Jul 7 14:06:56 greysrv kernel: ACPI APIC Table: <A M I OEMAPIC > Jul 7 14:06:56 greysrv kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Jul 7 14:06:56 greysrv kernel: cpu0 (BSP): APIC ID: 0 Jul 7 14:06:56 greysrv kernel: cpu1 (AP): APIC ID: 1 Jul 7 14:06:56 greysrv kernel: MADT: Forcing active-low polarity and level trigger for SCI Jul 7 14:06:56 greysrv kernel: ioapic0 <Version 1.1> irqs 0-23 on motherboard Jul 7 14:06:56 greysrv kernel: ioapic1 <Version 1.1> irqs 24-27 on motherboard Jul 7 14:06:56 greysrv kernel: ioapic2 <Version 1.1> irqs 28-31 on motherboard Jul 7 14:06:56 greysrv kernel: acpi0: <A M I OEMRSDT> on motherboard Jul 7 14:06:56 greysrv kernel: acpi0: Power Button (fixed) Jul 7 14:06:56 greysrv kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 Jul 7 14:06:56 greysrv kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0 Jul 7 14:06:56 greysrv kernel: cpu0: <ACPI CPU> on acpi0 Jul 7 14:06:56 greysrv kernel: acpi_throttle0: <ACPI CPU Throttling> on cpu0 Jul 7 14:06:56 greysrv kernel: cpu1: <ACPI CPU> on acpi0 Jul 7 14:06:56 greysrv kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Jul 7 14:06:56 greysrv kernel: pci0: <ACPI PCI bus> on pcib0 Jul 7 14:06:56 greysrv kernel: pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 Jul 7 14:06:56 greysrv kernel: pci3: <ACPI PCI bus> on pcib1 Jul 7 14:06:56 greysrv kernel: ohci0: <OHCI (generic) USB controller> mem 0xfeafc000-0xfeafcfff irq 19 at device 0.0 on pci3 Jul 7 14:06:56 greysrv kernel: usb0: OHCI version 1.0, legacy support Jul 7 14:06:56 greysrv kernel: usb0: <OHCI (generic) USB controller> on ohci0 Jul 7 14:06:56 greysrv kernel: usb0: USB revision 1.0 Jul 7 14:06:56 greysrv kernel: uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Jul 7 14:06:56 greysrv kernel: uhub0: 3 ports with 3 removable, self powered Jul 7 14:06:56 greysrv kernel: ohci1: <OHCI (generic) USB controller> mem 0xfeafd000-0xfeafdfff irq 19 at device 0.1 on pci3 Jul 7 14:06:56 greysrv kernel: usb1: OHCI version 1.0, legacy support Jul 7 14:06:56 greysrv kernel: usb1: <OHCI (generic) USB controller> on ohci1 Jul 7 14:06:56 greysrv kernel: usb1: USB revision 1.0 Jul 7 14:06:56 greysrv kernel: uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Jul 7 14:06:56 greysrv kernel: uhub1: 3 ports with 3 removable, self powered Jul 7 14:06:56 greysrv kernel: atapci0: <SiI 3114 SATA150 controller> port 0xa800-0xa80f,0xac00-0xac03,0xb000-0xb007,0xb400-0xb403,0xbc00-0xbc07 mem 0xfeafec00-0xfeafefff irq 19 at device 5.0 on pci3 Jul 7 14:06:56 greysrv kernel: ata2: channel #0 on atapci0 Jul 7 14:06:56 greysrv kernel: ata3: channel #1 on atapci0 Jul 7 14:06:56 greysrv kernel: ata4: channel #2 on atapci0 Jul 7 14:06:56 greysrv kernel: ata5: channel #3 on atapci0 Jul 7 14:06:56 greysrv kernel: pci3: <display, VGA> at device 6.0 (no driver attached) Jul 7 14:06:56 greysrv kernel: fxp0: <Intel 82551 Pro/100 Ethernet> port 0xa400-0xa43f mem 0xfeaa0000-0xfeabffff,0xfeafb000-0xfeafbfff irq 18 at device 8.0 on pci3 Jul 7 14:06:56 greysrv kernel: miibus0: <MII bus> on fxp0 Jul 7 14:06:56 greysrv kernel: inphy0: <i82555 10/100 media interface> on miibus0 Jul 7 14:06:56 greysrv kernel: inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Jul 7 14:06:56 greysrv kernel: fxp0: Ethernet address: 00:e0:81:2d:ec:b5 Jul 7 14:06:56 greysrv kernel: isab0: <PCI-ISA bridge> at device 7.0 on pci0 Jul 7 14:06:56 greysrv kernel: isa0: <ISA bus> on isab0 Jul 7 14:06:56 greysrv kernel: atapci1: <AMD 8111 UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 Jul 7 14:06:56 greysrv kernel: ata0: channel #0 on atapci1 Jul 7 14:06:56 greysrv kernel: ata1: channel #1 on atapci1 Jul 7 14:06:56 greysrv kernel: pci0: <serial bus, SMBus> at device 7.2 (no driver attached) Jul 7 14:06:56 greysrv kernel: pci0: <bridge> at device 7.3 (no driver attached) Jul 7 14:06:56 greysrv kernel: pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0 Jul 7 14:06:56 greysrv kernel: pci2: <ACPI PCI bus> on pcib2 Jul 7 14:06:56 greysrv kernel: bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 0xfc8b0000-0xfc8bffff,0xfc8c0000-0xfc8cffff irq 24 at device 9.0 on pci2 Jul 7 14:06:56 greysrv kernel: miibus1: <MII bus> on bge0 Jul 7 14:06:56 greysrv kernel: brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus1 Jul 7 14:06:56 greysrv kernel: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto Jul 7 14:06:56 greysrv kernel: bge0: Ethernet address: 00:e0:81:2d:ec:e2 Jul 7 14:06:56 greysrv kernel: bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 0xfc8e0000-0xfc8effff,0xfc8f0000-0xfc8fffff irq 25 at device 9.1 on pci2 Jul 7 14:06:56 greysrv kernel: miibus2: <MII bus> on bge1 Jul 7 14:06:56 greysrv kernel: brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus2 Jul 7 14:06:56 greysrv kernel: brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto Jul 7 14:06:56 greysrv kernel: bge1: Ethernet address: 00:e0:81:2d:ec:e3 Jul 7 14:06:56 greysrv kernel: pci0: <base peripheral, interrupt controller> at device 10.1 (no driver attached) Jul 7 14:06:56 greysrv kernel: pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0 Jul 7 14:06:56 greysrv kernel: pci1: <ACPI PCI bus> on pcib3 Jul 7 14:06:56 greysrv kernel: pci0: <base peripheral, interrupt controller> at device 11.1 (no driver attached) Jul 7 14:06:56 greysrv kernel: acpi_button0: <Power Button> on acpi0 Jul 7 14:06:56 greysrv kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 Jul 7 14:06:56 greysrv kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Jul 7 14:06:56 greysrv kernel: kbd0 at atkbd0 Jul 7 14:06:56 greysrv kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 Jul 7 14:06:56 greysrv kernel: psm0: model IntelliMouse Explorer, device ID 4 Jul 7 14:06:56 greysrv kernel: sio0: configured irq 4 not in bitmap of probed irqs 0 Jul 7 14:06:56 greysrv kernel: sio0: port may not be enabled Jul 7 14:06:56 greysrv kernel: sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 Jul 7 14:06:56 greysrv kernel: sio0: type 16550A Jul 7 14:06:56 greysrv kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 Jul 7 14:06:56 greysrv kernel: sio1: port may not be enabled Jul 7 14:06:56 greysrv kernel: sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 Jul 7 14:06:56 greysrv kernel: sio1: type 16550A Jul 7 14:06:56 greysrv kernel: fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 Jul 7 14:06:56 greysrv kernel: ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 Jul 7 14:06:56 greysrv kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode Jul 7 14:06:56 greysrv kernel: ppbus0: <Parallel port bus> on ppc0 Jul 7 14:06:56 greysrv kernel: plip0: <PLIP network interface> on ppbus0 Jul 7 14:06:56 greysrv kernel: lpt0: <Printer> on ppbus0 Jul 7 14:06:56 greysrv kernel: lpt0: Interrupt-driven port Jul 7 14:06:56 greysrv kernel: ppi0: <Parallel I/O> on ppbus0 Jul 7 14:06:56 greysrv kernel: orm0: <ISA Option ROMs> at iomem 0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0 Jul 7 14:06:56 greysrv kernel: sc0: <System console> at flags 0x100 on isa0 Jul 7 14:06:56 greysrv kernel: sc0: VGA <16 virtual consoles, flags=0x300> Jul 7 14:06:56 greysrv kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Jul 7 14:06:56 greysrv kernel: Timecounters tick every 1.000 msec Jul 7 14:06:56 greysrv kernel: ad0: 190782MB <WDC WD2000JB-32FUA0/15.05R15> [387621/16/63] at ata0-master UDMA100 Jul 7 14:06:56 greysrv kernel: ad2: 190782MB <WDC WD2000JB-32FUA0/15.05R15> [387621/16/63] at ata1-master UDMA100 Jul 7 14:06:56 greysrv kernel: acd0: CDROM <LTN526S/YS0J> at ata1-slave PIO4 Jul 7 14:06:56 greysrv kernel: ad4: 114473MB <ST3120827AS/3.42> [232581/16/63] at ata2-master SATA150 Jul 7 14:06:56 greysrv kernel: ad6: 117246MB <Maxtor 6Y120M0/YAR51EW0> [238216/16/63] at ata3-master SATA150 Jul 7 14:06:56 greysrv kernel: ad8: 117246MB <Maxtor 6Y120M0/YAR51HW0> [238216/16/63] at ata4-master SATA150 Jul 7 14:06:56 greysrv kernel: ad10: 114473MB <ST3120827AS/3.42> [232581/16/63] at ata5-master SATA150 Jul 7 14:06:56 greysrv kernel: SMP: AP CPU #1 Launched! Jul 7 14:06:56 greysrv kernel: Mounting root from ufs:/dev/ad0s1a Jul 7 14:06:56 greysrv rpcbind: cannot create socket for udp6 -- ---==================--- Evan Jones IT Administrator Email: evan.jones@tilcon.com Phone: (613) 226-3917 x231 ---================---
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42CD8716.8050204>