Date: Sun, 20 Sep 1998 20:30:09 +0200 From: Jeroen Ruigrok/Asmodai <asmodai@wxs.nl> To: Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr> Cc: FreeBSD Current <current@FreeBSD.ORG> Subject: Re: Zip drives/vpo0 device [LONG: LOG] Message-ID: <Version.32.19980920195928.00ef1780@pop.wxs.nl> In-Reply-To: <19980920193529.04194@breizh.prism.uvsq.fr> References: <Version.32.19980920154505.00e64820@pop.wxs.nl> <Version.32.19980920154505.00e64820@pop.wxs.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
At 21:35 20-09-98 , Nicolas Souchu wrote:
>On Sun, Sep 20, 1998 at 03:48:37PM +0200, Jeroen Ruigrok/Asmodai wrote:
>>I have been trying to use the vpo0/ppbus device/controller with CURRENT and
>>my Zip Plus and have thus far failed miserably...
>>
>>I have recompiled my kernel with the ppbus/vpo/ppi and scbus and sd
>>controllers and devices...
>
>Hmm, here is my target config, compare.
>
># SCSI stuff for vpo
>#
>controller scbus0
>
>options SCSI_REPORT_GEOMETRY
>
>device da0
>device pass0 #CAM passthrough driver
ignoring CAM for the moment =), what's da0? I haven't managed to CVSup my
May SNAP yet... Still struggling with ppp. Pointers are welcome =) Already
read too many out of date docs...
>controller ppbus0
>controller vpo0 at ppbus?
>
>device nlpt0 at ppbus?
>device ppi0 at ppbus?
>device plip0 at ppbus?
>
>controller ppc0 at isa? port 0x278 tty irq 7 vector ppcintr
Aha, that ppc0 wasn't clear to me, included it now...
dmesg output:
ppc0 at 0x278 irq 7 on isa
ppc0: Generic chipset in PS/2 mode
Hmmm, I only have the options to set the parallel port to: Normal,
Bi-directional and ECP. Any hints for the best throughput?
>>But when it comes to mounting I am stuck.
>
>I can't imagine what your logs are, please help me. Try -v boot flag too.
>>Can anyone provide some light in this darkness?
>
>dmesg command will be our lamp ;)
Dell Latitude CP Notebook...
chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0
found-> vendor=0x8086, dev=0x7110, revid=0x01
class=06-80-00, hdrtype=0x00, mfdev=1
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.1.0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.1.1
intel_piix_status: primary master sample = 3, master recovery = 1
intel_piix_status: primary master fastDMAonly disabled, pre/post enabled,
intel_piix_status: IORDY sampling enabled,
intel_piix_status: fast PIO enabled
intel_piix_status: primary slave sample = 5, slave recovery = 4
intel_piix_status: primary slave fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
ide_pci: busmaster 0 status: 24 from port: 0000ffa2
ide_pci: ide0:0 has been configured for DMA by BIOS
intel_piix_status: secondary master sample = 3, master recovery = 3
intel_piix_status: secondary master fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling enabled,
intel_piix_status: fast PIO enabled
intel_piix_status: secondary slave sample = 5, slave recovery = 4
intel_piix_status: secondary slave fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
ide_pci: busmaster 1 status: 24 from port: 0000ffaa
ide_pci: ide1:0 has been configured for DMA by BIOS
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=11
chip2: <Intel 82371AB USB host controller> rev 0x01 int d irq 11 on pci0.1.2
found-> vendor=0x8086, dev=0x7113, revid=0x01
class=06-80-00, hdrtype=0x00, mfdev=0
chip3: <Intel 82371AB Power management controller> rev 0x01 on pci0.1.3
found-> vendor=0x10c8, dev=0x0004, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
map[0]: type 3, range 32, base fd000000, size 24
map[1]: type 1, range 32, base ff000000, size 21
map[2]: type 1, range 32, base ff200000, size 20
vga0: <NeoMagic NM3160 laptop SVGA controller> rev 0x00 int a irq 11 on
pci0.2.0
found-> vendor=0x104c, dev=0xac15, revid=0x01
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=11
pcic0: <TI 1131 PCI to PCMCIA/CardBus bridge> rev 0x01 int a irq 11 on
pci0.3.0
PCI Config space:
00: ac15104c 02000007 06070001 00822008
10: 00000000 02000000 00000000 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 0340010b
40: 00751028 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 00241024 00000000 00000000 00000000
90: 00748200 00000000 00000000 00000000
Cardbus Socket registers:
00: f000afce: f000afce: f000e2c3: f000afce:
10: f000afce: c0003570: f000aea0: f000afce:
ExCa registers:
00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
found-> vendor=0x104c, dev=0xac15, revid=0x01
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=b, irq=11
pcic1: <TI 1131 PCI to PCMCIA/CardBus bridge> rev 0x01 int b irq 11 on
pci0.3.1
PCI Config space:
00: ac15104c 02000007 06070001 00822008
10: 00000000 02000000 00000000 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 0340020b
40: 00751028 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 00241024 00000000 00000000 00000000
90: 00748200 00000000 00000000 00000000
Cardbus Socket registers:
00: f000afce: f000afce: f000e2c3: f000afce:
10: f000afce: c0003570: f000aea0: f000afce:
ExCa registers:
00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Initializing PnP override table
Probing for PnP devices:
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
No Plug-n-Play devices were found
Probing for devices on the ISA bus:
sc0: the current keyboard controller command byte 0065
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: BIOS video mode:3
sc0: VGA registers upon power-up
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: video mode:24
sc0: VGA registers in BIOS for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: VGA registers to be used for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: rows_offset:1
sc0: VGA color <16 virtual consoles, flags=0x0>
mss_probe: no address supplied, try default 0x530
mss_detect error, busy still set (0xff)
sb_probe: no address supplied, try defaults (0x220,0x240)
pcm0 at 0x220 irq 10 drq 1 on isa
ppc0 at 0x278 irq 7 on isa
ppc0: Generic chipset in PS/2 mode
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0 not probed due to irq conflict with ppc0 at 7
psm0: current command byte:0065
kbdio: TEST_AUX_PORT status:0000
kbdio: RESET_AUX return code:00fa
kbdio: RESET_AUX status:00aa
kbdio: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: status 10 00 64
psm: data 08 00 00
psm: data 08 00 00
psm: status 00 02 64
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <IBM-DTCA-24090>
wd0: 3909MB (8007552 sectors), 7944 cyls, 16 heads, 63 S/T, 512 B/S
wd0: ATA INQUIRE valid = 0007, dmamword = 0007, apio = 0003, udma = 0407
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <CD-ROM CDR_U200/1.09>, removable, intr, dma, iordis
atapi1.0: unknown phase
npx0 on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 175070028 bytes/sec
bzero() bandwidth = 763941940 bytes/sec
apm0: disabled, not probed.
imasks: bio c008c040, tty c0071492, net c0071492
device combination doesn't support shared irq4
intr_connect(irq4) failed, result=-1
device combination doesn't support shared irq7
intr_connect(irq7) failed, result=-1
device combination doesn't support shared irq10
intr_connect(irq10) failed, result=-1
device combination doesn't support shared irq12
intr_connect(irq12) failed, result=-1
device combination doesn't support shared irq14
intr_connect(irq14) failed, result=-1
device combination doesn't support shared irq15
intr_connect(irq15) failed, result=-1
PC-Card VLSI 82C146 (5 mem & 2 I/O windows)
pcic: controller irq 3
Initializing PC-card drivers: sio
BIOS Geometries:
0:03df7f3f 0..991=992 cylinders, 0..127=128 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
Intel Pentium F00F detected, installing workaround
new masks: bio c008c040, tty c0071492, net c0071492
Considering FFS root f/s.
wd0s1: type 0x6, start 63, end = 3806207, size 3806145 : OK
wd0s2: type 0xa5, start 3806208, end = 8007551, size 4201344 : OK
Thanks, again =)
Jeroen Ruigrok van der Werven / Asmodai <asmodai(at)wxs.nl>
ICQ-UIN: 1564317 .:. Ninth Circle Enterprises
Network/Security Specialist
/==|| FreeBSD and picoBSD, the Power to Serve ||==\
-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.0 for non-commercial use <http://www.pgp.com>;
iQA/AwUBNgU7oYY752GnxADpEQIfEQCg4exLq/icb0A5a1g64HyMo31qviMAoKmL
QZDrH5jx7LgOm64XVQo6gds+
=DsKC
-----END PGP SIGNATURE-----
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Version.32.19980920195928.00ef1780>