Date: Tue, 23 Apr 2019 12:39:20 -0700 From: Adrian Chadd <adrian.chadd@gmail.com> To: Serge Semenenko <serge.a1@gmail.com> Cc: Matthias Apitz <guru@unixarea.de>, "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Atheros AR5B22 WLAN+Bluetooth support on FreeBSD Message-ID: <CAJ-Vmok4amtPoN0-p=47jnhP6j4Vx=F%2BAx6aNz4rHyq30pjRCQ@mail.gmail.com> In-Reply-To: <CAFOmZk0pMHmHbfmeHE1QMcwKNALJPQFJe9Ygqq%2B5aWdu369e8w@mail.gmail.com> References: <CAFOmZk2kVqhfsfTfmyaF7aZPmLjPmgtNk7DZoA=GteZvVPmJJA@mail.gmail.com> <20190421071938.GA59008@c720-r342378> <CAFOmZk0pMHmHbfmeHE1QMcwKNALJPQFJe9Ygqq%2B5aWdu369e8w@mail.gmail.com>
index | next in thread | previous in thread | raw e-mail
Do you have the kernel environment variable setup to say it's a WB222?
-a
On Tue, 23 Apr 2019 at 12:37, Serge Semenenko <serge.a1@gmail.com> wrote:
> Could it matter that I load modules from rc.conf?
>
> kld_list="if_ath if_ath_pci linux linsysfs linprocfs xhci umass ums
> snd_hda /boot/modules/i915kms.ko /boot/modules/acpi_call.ko"
>
> вс, 21 апр. 2019 г. в 11:05, Matthias Apitz <guru@unixarea.de>:
>
>> El día sábado, abril 20, 2019 a las 02:16:49p. m. +0300, Serge Semenenko
>> escribió:
>>
>> > Hi
>> >
>> > It works for me with such section in devd.conf
>> >
>> > attach 200 {
>> > device-name "ubt[0-9]+";
>> > match "vendor" "0x0cf3";
>> > match "product" "0xe006";
>> > action "sleep 2 && /usr/sbin/ath3kfw -d $ugen && sleep 2 &&
>> /etc/rc.d/bluetooth quietstart $device-name";
>> > };
>>
>> I have added the above lines to /etc/devd.conf, ofc with the vendor and
>> product ID of my chip:
>>
>> $ usbconfig
>> ...
>> ugen0.3: <vendor 0x0489 product 0xe056> at usbus0, cfg=0 md=HOST spd=FULL
>> (12Mbps) pwr=ON (100mA)
>>
>> and place the firmware in the directory where /usr/sbin/ath3kfw is
>> looking for it, into /usr/share/firmware/ath3k/ar3k/
>>
>> The problem remains: no device /dev/ubt0 gets created (and the attach
>> rule does not apply.
>>
>> When I change 'attach 200' to 'notify 100', /usr/sbin/ath3kfw gets
>> called and the firmware gets loaded into the chip. But nothing of BT does
>> work.
>>
>> I think some of the nd_*.ko modules do not attach and due to this the
>> device is not created.
>>
>> matthias
>>
>> --
>> Matthias Apitz, ✉ guru@unixarea.de, http://www.unixarea.de/
>> +49-176-38902045
>> Public GnuPG key: http://www.unixarea.de/key.pub
>> N € I N zur EU!
>> "Gegen das EU-Europa der Banken, Konzerne und Kriegstreiber.
>> Für ein soziales und friedliches Europa der Völker." DKP
>>
>
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmok4amtPoN0-p=47jnhP6j4Vx=F%2BAx6aNz4rHyq30pjRCQ>