Date: Wed, 4 Oct 2000 23:22:28 +0200 (CEST) From: Michael Reifenberger <root@nihil.plaut.de> To: FreeBSD-Current <current@freebsd.org> Cc: sos@freebsd.org Subject: Still no go with Sandisk SM and -current Message-ID: <Pine.BSF.4.21.0010042314210.324-200000@localhost>
index | next in thread | raw e-mail
[-- Attachment #1 --]
Hi,
As the subject says, I get the following message from my Tecra8000 and -current:
ata4 at port 0x250-0x25f irq 10 slot 1 on pccard1
ata4-master: ata_command: timeout waiting for intr
ata4-master: identify failed
pccard: card inserted, slot 1
Attached is the pccardc dumpcis output.
I tried with a appropriate hint but got no success too.
Bye!
----
Michael Reifenberger
^.*Plaut.*$, IT, R/3 Basis, GPS
[-- Attachment #2 --]
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 43 02 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = OFF
Speed = 150nS, Memory block size = 8Kb, 1 units
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 01 01 89 05
PCMCIA ID = 0x101, OEM ID = 0x589
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #5, code = 0x15 (Version 1 info), length = 57
000: 04 01 33 43 6f 6d 20 43 6f 72 70 6f 72 61 74 69
010: 6f 6e 00 33 43 35 38 39 00 54 50 2f 42 4e 43 20
020: 4c 41 4e 20 43 61 72 64 20 56 65 72 2e 20 32 61
030: 00 30 30 30 30 30 32 00 ff
Version = 4.1, Manuf = [3Com Corporation], card vers = [3C589]
Addit. info = [TP/BNC LAN Card Ver. 2a],[000002]
Tuple #6, code = 0x1a (Configuration map), length = 6
000: 02 03 00 00 01 03
Reg len = 3, config register addr = 0x10000, last config = 0x3
Registers: XX------
Tuple #7, code = 0x1b (Configuration entry), length = 15
000: c1 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff ff
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 3 x 10mA
Max current average over 10 ms: 5 x 10mA
Power down supply current: 5 x 1mA
Wait scale Speed = 7.0 x 100 ns
RDY/BSY scale Speed = 5.0 x 100 us
Card decodes 4 address lines, full 8/16 Bit I/O
IRQ modes: Level
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 03 01 71 55 26 26 54
Config index = 0x3
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 2 x 100mA
Max current average over 10 ms: 2 x 100mA
Power down supply current: 5 x 1mA
Tuple #9, code = 0x19 (JEDEC descr for attribute memory), length = 3
000: 00 00 ff
Tuple #10, code = 0x14 (No link), length = 0
Tuple #11, code = 0x10 (Checksum), length = 5
000: 89 ff 80 00 00
Checksum from offset 65417, length 128, value is 0x0
Tuple #12, code = 0xff (Terminator), length = 0
2 slots found
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0010042314210.324-200000>