Date: Tue, 14 Jan 2003 09:36:42 +0200 From: Tomi Vainio - Sun Finland - <Tomi.Vainio@Sun.COM> To: freebsd-sparc@freebsd.org Subject: RC3 boot problems so far Message-ID: <15907.48650.256866.392460@ultrahot.finland.sun.com> In-Reply-To: <15907.17453.977625.480276@ultrahot.finland.sun.com> References: <15907.17453.977625.480276@ultrahot.finland.sun.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I've tried to boot couple machines at out lab. Here is the list: SB150 E220R E250 E3500 Netra T1 105 U1E V120 I found couple problems. We can't probe gem-device from FCAL/GBE combo card. - gem0: phy probe failed: 6 - both e220r / t1-105 logs shows this Panic after isp0: <Qlogic ISP 10160 PCI SCSI Adapter> - e250 log SCSI errors from multiple devices - isp0: bad underrun for 13.0 (count 255, resid 127, status not marked) - t1-105 log Tomppa ---clip clip--- Sun Enterprise 220R (UltraSPARC-II 360MHz), No Keyboard OpenBoot 3.31, 512 MB memory installed, Serial #12115752. Ethernet address 8:0:20:b8:df:28, Host ID: 80b8df28. Initializing Memory Boot device: /pci@1f,4000/network@1,1 File and args: Timeout waiting for ARP/RARP packet FreeBSD/sparc64 loader bootpath="/pci@1f,4000/network@1,1" loaddev=net0: boot: ethernet address: 08:00:20:b8:df:28 bootp: no reply net_open: client addr: 129.159.107.133 net_open: client name: e220r.cslab.finland.sun.com net_open: server addr: 129.159.107.1 net_open: server path: /u/tomppa/F |/-> \ \: unknown command \|/-/boot/kernel/kernel data=0x312c08+0xe77b8 \|syms=[0x8+0x49890/-\+0x8+0x38cf5] Hit [Enter] to boot immediately, or any other key for command prompt. nothing to autoload yet. jumping to kernel entry at 0xc0038000. stray vector interrupt 2029 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-RC3 #0: Sat Jan 11 06:47:44 GMT 2003 rootk@cyclequad.nuxi.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0480000. Timecounter "tick" frequency 360006234 Hz cpu0: Sun Microsystems UltraSparc-II Processor (360.01 MHz CPU) Model: SUNW,Ultra-60 Initializing GEOMetry subsystem nexus0: <OpenFirmware Nexus device> pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: Psycho, impl 0, version 4, ign 7c0 initialializing counter-timer Timecounter "counter-timer" frequency 1000000 Hz DVMA map: 0xfe000000 to 0xffffffff device 0/1/0: latency timer 0 -> 82 pcib0: ofw_pci_init: no interrupt mapping found for 0/1/0 (preset 128) device 0/1/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 0/1/1 to 33 (preset was 0) device 0/3/0: latency timer 0 -> 140 pcib0: ofw_pci_init: mapping intr for 0/3/0 to 32 (preset was 0) device 0/3/1: latency timer 0 -> 140 pcib0: ofw_pci_init: mapping intr for 0/3/1 to 38 (preset was 0) PCI-PCI bridge at 0/5/0: setting bus #s to 0/1/1 pcib0: ofw_pci_init: descending to subordinate PCI bus device 1/0/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/0/0 to 28 (preset was 0) device 1/0/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/0/1 to 29 (preset was 0) device 1/1/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/1/0 to 29 (preset was 0) device 1/1/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/1/1 to 30 (preset was 0) device 1/2/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/2/0 to 30 (preset was 0) device 1/2/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/2/1 to 31 (preset was 0) device 1/3/0: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/3/0 to 31 (preset was 0) device 1/3/1: latency timer 0 -> 82 pcib0: ofw_pci_init: mapping intr for 1/3/1 to 28 (preset was 0) pci0: <PCI bus> on pcib0 ebus0: revision 0x01 ebus0: <PCI-EBus2 bridge> mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0 ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached) ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached) ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached) ebus0: <se> addr 0x1400400000-0x140040007f irq 43 (no driver attached) ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached) ebus0: <su> addr 0x14003062f8-0x14003062ff irq 42 (no driver attached) ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043cb irq 34 (no driver attached) ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 39 (no driver attached) eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 eeprom0: hostid 80b8df28 ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0x10100000-0x10107fff irq 33 at device 1.1 on pci0 hme0: Ethernet address: 08:00:20:b8:df:28 miibus0: <MII bus> on hme0 qsphy0: <QS6612 10/100 media interface> on miibus0 qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sym0: <875> port 0x1000-0x10ff mem 0x1010a000-0x1010afff,0x10108000-0x101080ff irq 32 at device 3.0 on pci0 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: <875> port 0x1400-0x14ff mem 0x1010e000-0x1010efff,0x1010c000-0x1010c0ff irq 38 at device 3.1 on pci0 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking pcib1: <PCI-PCI bridge> at device 5.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <bridge, PCI-unknown> at device 0.0 (no driver attached) hme1: <Sun HME 10/100 Ethernet> mem 0x4000000-0x4007fff irq 29 at device 0.1 on pci1 hme1: Ethernet address: 08:00:20:b8:df:28 miibus1: <MII bus> on hme1 qsphy1: <QS6612 10/100 media interface> on miibus1 qsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: <bridge, PCI-unknown> at device 1.0 (no driver attached) hme2: <Sun HME 10/100 Ethernet> mem 0x8000000-0x8007fff irq 30 at device 1.1 on pci1 hme2: Ethernet address: 08:00:20:b8:df:28 miibus2: <MII bus> on hme2 qsphy2: <QS6612 10/100 media interface> on miibus2 qsphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: <bridge, PCI-unknown> at device 2.0 (no driver attached) hme3: <Sun HME 10/100 Ethernet> mem 0xc000000-0xc007fff irq 31 at device 2.1 on pci1 hme3: Ethernet address: 08:00:20:b8:df:28 miibus3: <MII bus> on hme3 qsphy3: <QS6612 10/100 media interface> on miibus3 qsphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: <bridge, PCI-unknown> at device 3.0 (no driver attached) hme4: <Sun HME 10/100 Ethernet> mem 0x10000000-0x10007fff irq 28 at device 3.1 on pci1 hme4: Ethernet address: 08:00:20:b8:df:28 miibus4: <MII bus> on hme4 qsphy4: <QS6612 10/100 media interface> on miibus4 qsphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib2: <U2P UPA-PCI bridge> on nexus0 pcib2: Psycho, impl 0, version 4, ign 7c0 PCI-PCI bridge at 2/1/0: setting bus #s to 2/3/3 pcib2: ofw_pci_init: descending to subordinate PCI bus device 3/4/0: latency timer 0 -> 528 pcib2: ofw_pci_init: mapping intr for 3/4/0 to 0 (preset was 255) pcib2: ofw_pci_init: mapping intr for 3/5/0 to 1 (preset was 0) pci2: <PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 1.0 on pci2 pci3: <PCI bus> on pcib3 gem0: <Sun GEM Gigabit Ethernet Adaptor> mem 0x200000-0x3fffff irq 0 at device 4.0 on pci3 gem0: phy probe failed: 6 gem0: could not be configured device_probe_and_attach: gem0 attach returned 6 isp0: <Qlogic ISP 2100 PCI FC-AL Adapter> port 0x1000-0x10ff mem 0x400000-0x400fff irq 1 at device 5.0 on pci3 Timecounters tick every 10.000 msec Waiting 15 seconds for SCSI devices to settle cd0 at sym0 bus 0 target 6 lun 0 cd0: <TOSHIBA XM6201TASUN32XCD 1103> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 16) cd0: Attempt to query device size failed: NOT READY, Medium not present da1 at sym0 bus 0 target 1 lun 0 da1: <FUJITSU MAG3182L SUN18G 1111> Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da1: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) da0 at sym0 bus 0 target 0 lun 0 da0: <FUJITSU MAG3182L SUN18G 1111> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da0: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:da0a ? List valid disk boot devices <empty line> Abort manual input mountroot> mountroot> panic: Root mount failed, startup aborted. cpuid = 0; syncing disks, buffers remaining... done Uptime: 2m3s Automatic reboot in 15 seconds - press a key on the console to abort --> Press a key on the console to reboot, --> or switch off the system now. Rebooting... Resetting ... ---clip clip--- Sun (TM) Enterprise 250 (2 X UltraSPARC-II 296MHz), No Keyboard OpenBoot 3.26, 512 MB memory installed, Serial #10904892. Ethernet address 8:0:20:a6:65:3c, Host ID: 80a6653c. Timeout waiting for ARP/RARP packet Timeout waiting for ARP/RARP packet Timeout waiting for ARP/RARP packet Timeout waiting for ARP/RARP packet Console: OpenFirmware console FreeBSD/sparc64 loader bootpath="/pci@1f,4000/network@1,1" loaddev=net0: boot: ethernet address: 08:00:20:a6:65:3c bootp: no reply net_open: client addr: 129.159.107.132 net_open: client name: e250.cslab.finland.sun.com net_open: server addr: 129.159.107.1 net_open: server path: /u/tomppa/F |/-> \ \: unknown command /boot/kernel/kernel.ko data=0x312c08+0xe77b8 \|syms=[0x8+0x49890/-\+0x8+0x38cf5|/-\] Hit [Enter] to boot immediately, or any other key for command prompt. nothing to autoload yet. jumping to kernel entry at 0xc0038000. Costray vector interrupt 2029 pyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-RC3 #0: Sat Jan 11 06:47:44 GMT 2003 rootk@cyclequad.nuxi.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel.ko" at 0xc0480000. Timecounter "tick" frequency 296000000 Hz cpu0: Sun Microsystems UltraSparc-II Processor (296.00 MHz CPU) Model: SUNW,Ultra-250 cpu1: Sun Microsystems UltraSparc-II Processor (296.00 MHz CPU) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Initializing GEOMetry subsystem nexus0: <OpenFirmware Nexus device> nexus0: <associations>, type (unknown) (no driver attached) pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: Psycho, impl 0, version 4, ign 7c0 initialializing counter-timer Timecounter "counter-timer" frequency 1000000 Hz DVMA map: 0xfe000000 to 0xffffffff device 0/1/0: latency timer 10 -> 82 pcib0: ofw_pci_init: no interrupt mapping found for 0/1/0 (preset 0) device 0/1/1: latency timer 10 -> 82 pcib0: ofw_pci_init: mapping intr for 0/1/1 to 33 (preset was 0) device 0/3/0: latency timer 17 -> 140 pcib0: ofw_pci_init: mapping intr for 0/3/0 to 32 (preset was 0) device 0/3/1: latency timer 17 -> 140 pcib0: ofw_pci_init: mapping intr for 0/3/1 to 38 (preset was 0) device 0/2/0: latency timer 17 -> 140 pcib0: ofw_pci_init: mapping intr for 0/2/0 to 16 (preset was 0) device 0/2/1: latency timer 17 -> 140 pcib0: ofw_pci_init: mapping intr for 0/2/1 to 17 (preset was 0) PCI-PCI bridge at 0/4/0: setting bus #s to 0/1/1 pcib0: ofw_pci_init: descending to subordinate PCI bus device 1/4/0: latency timer 64 -> 528 pcib0: ofw_pci_init: mapping intr for 1/4/0 to 24 (preset was 0) device 1/5/0: latency timer 64 -> 528 pcib0: ofw_pci_init: mapping intr for 1/5/0 to 25 (preset was 0) device 0/5/0: latency timer 17 -> 140 pcib0: ofw_pci_init: mapping intr for 0/5/0 to 28 (preset was 0) device 0/5/1: latency timer 17 -> 140 pcib0: ofw_pci_init: mapping intr for 0/5/1 to 29 (preset was 0) pci0: <PCI bus> on pcib0 ebus0: revision 0x01 ebus0: <PCI-EBus2 bridge> mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0 ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached) ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached) ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached) ebus0: <se> addr 0x1400400000-0x140040007f irq 43 (no driver attached) ebus0: <se> addr 0x1400200000-0x140020007f irq 35 (no driver attached) ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached) ebus0: <su> addr 0x14003062f8-0x14003062ff irq 33 (no driver attached) ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043cb irq 33 (no driver attached) ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 39 (no driver attached) eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 eeprom0: hostid 80a6653c ebus0: <flashprom> addr 0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached) ebus0: <SUNW,envctrltwo> addr 0x1400600000-0x1400600003 irq 37,40 (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0x200000-0x207fff irq 33 at device 1.1 on pci0 hme0: Ethernet address: 08:00:20:a6:65:3c miibus0: <MII bus> on hme0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sym0: <875> port 0x2800-0x28ff mem 0x212000-0x212fff,0x210000-0x2100ff irq 16 at device 2.0 on pci0 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: <875> port 0x2c00-0x2cff mem 0x216000-0x216fff,0x214000-0x2140ff irq 17 at device 2.1 on pci0 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking sym2: <875> port 0x2000-0x20ff mem 0x20a000-0x20afff,0x208000-0x2080ff irq 32 at device 3.0 on pci0 sym2: No NVRAM, ID 7, Fast-20, SE, parity checking sym3: <875> port 0x2400-0x24ff mem 0x20e000-0x20efff,0x20c000-0x20c0ff irq 38 at device 3.1 on pci0 sym3: No NVRAM, ID 7, Fast-20, SE, parity checking pcib1: <PCI-PCI bridge> at device 4.0 on pci0 pci1: <PCI bus> on pcib1 isp0: <Qlogic ISP 10160 PCI SCSI Adapter> port 0x1000-0x10ff mem 0x100000-0x100fff irq 24 at device 4.0 on pci1 panic: trap: data access error cpuid = 0; boot() called on cpu#0 Uptime: 1s Automatic reboot in 15 seconds - press a key on the console to abort rsc> xir Are you sure you want to send a non-maskable interrupt (XIR) to your server (Yes/No)? y ---clip clip--- Netra t1 (UltraSPARC-IIi 360MHz), No Keyboard OpenBoot 3.10.24 ME, 64 MB memory installed, Serial #11064612. Ethernet address 8:0:20:a8:d5:24, Host ID: 80a8d524. Initializing Memory Boot device: /pci@1f,0/pci@1,1/network@1,1 File and args: FreeBSD/sparc64 loader bootpath="/pci@1f,0/pci@1,1/network@1,1" loaddev=net0: boot: ethernet address: 08:00:20:a8:d5:24 net_open: server addr: 129.159.107.1 net_open: server path: /u/tomppa/F |/-> \ \: unknown command \|/-/boot/kernel/kernel.ko data=0x312c08+0xe77b8 \|syms=[0x8+0x49890/-\+0x8+0x38cf5|/-\] Hit [Enter] to boot immediately, or any other key for command prompt. nothing to autoload yet. jumping to kernel entry at 0xc0038000. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-RC3 #0: Sat Jan 11 06:47:44 GMT 2003 rootk@cyclequad.nuxi.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel.ko" at 0xc0480000. Timecounter "tick" frequency 360011687 Hz cpu0: Sun Microsystems UltraSparc-IIi Processor (360.01 MHz CPU) Model: SUNW,UltraSPARC-IIi-cEngine Initializing GEOMetry subsystem nexus0: <OpenFirmware Nexus device> pcib0: <U2P UPA-PCI bridge> on nexus0 pcib0: Sabre, impl 0, version 0, ign 7c0 DVMA map: 0xc0000000 to 0xdfffffff PCI-PCI bridge at 0/1/1: setting bus #s to 0/1/1 pcib0: ofw_pci_init: descending to subordinate PCI bus device 1/1/0: latency timer 10 -> 82 pcib0: ofw_pci_init: no interrupt mapping found for 1/1/0 (preset 0) device 1/1/1: latency timer 10 -> 82 pcib0: ofw_pci_init: mapping intr for 1/1/1 to 33 (preset was 0) device 1/2/0: latency timer 17 -> 140 pcib0: ofw_pci_init: mapping intr for 1/2/0 to 32 (preset was 0) PCI-PCI bridge at 0/1/0: setting bus #s to 0/2/2 pcib0: ofw_pci_init: descending to subordinate PCI bus PCI-PCI bridge at 0/1/0: setting bus #s to 0/2/3 PCI-PCI bridge at 2/1/0: setting bus #s to 2/3/3 pcib0: ofw_pci_init: descending to subordinate PCI bus device 3/14/0: latency timer 0 -> 16 pcib0: ofw_pci_init: mapping intr for 3/14/0 to 2 (preset was 14) PCI-PCI bridge at 2/1/0: setting bus #s to 2/3/4 PCI-PCI bridge at 0/1/0: setting bus #s to 0/2/4 PCI-PCI bridge at 3/15/0: setting bus #s to 3/4/4 pcib0: ofw_pci_init: descending to subordinate PCI bus device 4/4/0: latency timer 64 -> 528 pcib0: ofw_pci_init: mapping intr for 4/4/0 to 3 (preset was 255) pcib0: ofw_pci_init: mapping intr for 4/5/0 to 0 (preset was 0) pci0: <PCI bus> on pcib0 pcib1: <APB PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <PCI-PCI bridge> at device 1.0 on pci1 pci3: <PCI bus> on pcib2 atapci0: <CMD 646 ATA controller> port 0x2020-0x202f,0x2018-0x201b,0x2010-0x2017,0x2008-0x200b,0x2000-0x2007 irq 2 at device 14.0 on pci3 ata2: at 0x2000 on atapci0 ata3: at 0x2010 on atapci0 pcib3: <PCI-PCI bridge> at device 15.0 on pci3 pci4: <PCI bus> on pcib3 gem0: <Sun GEM Gigabit Ethernet Adaptor> mem 0x200000-0x3fffff irq 3 at device 4.0 on pci4 gem0: phy probe failed: 6 gem0: could not be configured device_probe_and_attach: gem0 attach returned 6 isp0: <Qlogic ISP 2100 PCI FC-AL Adapter> port 0x1000-0x10ff mem 0x400000-0x400fff irq 0 at device 5.0 on pci4 pcib4: <APB PCI-PCI bridge> at device 1.1 on pci0 pci2: <PCI bus> on pcib4 ebus0: revision 0x01 ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci2 ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached) ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached) ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) ebus0: <su> addr 0x14003803f8-0x14003803ff irq 28 (no driver attached) ebus0: <su> addr 0x14003602f8-0x14003602ff irq 20 (no driver attached) ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x1400340278-0x1400340287 irq 34 (no driver attached) ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003203f0-0x14003203f7 irq 39 (no driver attached) eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 eeprom0: hostid 80a8d524 ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached) ebus0: <watchdog> addr 0x1400200000-0x140020003f irq 4 (no driver attached) ebus0: <display7seg> addr 0x1400200040 (no driver attached) ebus0: <beeper> addr 0x1400722000-0x1400722003 (no driver attached) ebus0: <flashprom> addr 0x1000400000-0x10005fffff (no driver attached) ebus0: <flashprom> addr 0x1000800000-0x10009fffff (no driver attached) ebus0: <i2c> addr 0x1400600000-0x1400600003 irq 40 (no driver attached) ebus0: <i2c> addr 0x1400100000-0x1400100003 irq 27 (no driver attached) ebus0: <SUNW,lom> addr 0x1400400000-0x1400400063 (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff irq 33 at device 1.1 on pci2 hme0: Ethernet address: 08:00:20:a8:d5:24 miibus0: <MII bus> on hme0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy1: <Generic IEEE 802.3u media interface> on miibus0 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sym0: <875> port 0xc00000-0xc000ff mem 0xe000a000-0xe000afff,0xe0008000-0xe00080ff irq 32 at device 2.0 on pci2 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking Timecounters tick every 10.000 msec acd0: CDROM <TOSHIBA CD-ROM XM-7002Bc> at ata3-master PIO4 Waiting 15 seconds for SCSI devices to settle isp0: bad underrun for 13.0 (count 255, resid 127, status not marked) isp0: bad underrun for 29.0 (count 127, resid 1, status not marked) isp0: bad underrun for 13.0 (count 255, resid 127, status not marked) isp0: bad underrun for 29.0 (count 127, resid 1, status not marked) isp0: bad underrun for 13.0 (count 255, resid 127, status not marked) isp0: bad underrun for 29.0 (count 255, resid 127, status not marked) isp0: bad underrun for 13.0 (count 255, resid 127, status not marked) isp0: bad underrun for 29.0 (count 255, resid 127, status not marked) isp0: bad underrun for 13.0 (count 255, resid 127, status not marked) isp0: bad underrun for 29.0 (count 255, resid 127, status not marked) isp0: bad underrun for 29.0 (count 255, resid 127, status not marked) isp0: bad underrun for 29.0 (count 255, resid 127, status not marked) pass7 at isp0 bus 0 target 13 lun 0 pass7: <SUN SENA 1.09> Fixed Enclosure Services SCSI-3 device pass7: 100.000MB/s transfers pass15 at isp0 bus 0 target 29 lun 0 pass15: <SUN SENA 1.09> Fixed Enclosure Services SCSI-3 device pass15: 100.000MB/s transfers da0 at isp0 bus 0 target 0 lun 0 da0: <SEAGATE ST39102FCSUN9.0G 1129> Fixed Direct Access SCSI-2 device da0: 100.000MB/s transfers, Tagged Queueing Enabled da0: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da14 at sym0 bus 0 target 0 lun 0 da14: <FUJITSU MAJ3182M SUN18G 0804> Fixed Direct Access SCSI-2 device da14: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da14: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) da15 at sym0 bus 0 target 1 lun 0 da15: <IBM DDYST1835SUN18G S94N> Fixed Direct Access SCSI-3 device da15: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da15: 17274MB (35378533 512 byte sectors: 255H 63S/T 2202C) da1 at isp0 bus 0 target 1 lun 0 da1: <SEAGATE ST39102FCSUN9.0G 1129> Fixed Direct Access SCSI-2 device da1: 100.000MB/s transfers, Tagged Queueing Enabled da1: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da2 at isp0 bus 0 target 2 lun 0 da2: <SEAGATE ST39102FCSUN9.0G 1129> Fixed Direct Access SCSI-2 device da2: 100.000MB/s transfers, Tagged Queueing Enabled da2: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da3 at isp0 bus 0 target 3 lun 0 da3: <SEAGATE ST39102FCSUN9.0G 1129> Fixed Direct Access SCSI-2 device da3: 100.000MB/s transfers, Tagged Queueing Enabled da3: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da4 at isp0 bus 0 target 4 lun 0 da4: <SEAGATE ST39102FCSUN9.0G 1129> Fixed Direct Access SCSI-2 device da4: 100.000MB/s transfers, Tagged Queueing Enabled da4: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da5 at isp0 bus 0 target 5 lun 0 da5: <SEAGATE ST39102FCSUN9.0G 1129> Fixed Direct Access SCSI-2 device da5: 100.000MB/s transfers, Tagged Queueing Enabled da5: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da6 at isp0 bus 0 target 6 lun 0 da6: <SEAGATE ST39102FCSUN9.0G 1129> Fixed Direct Access SCSI-2 device da6: 100.000MB/s transfers, Tagged Queueing Enabled da6: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da7 at isp0 bus 0 target 16 lun 0 da7: <SEAGATE ST39102FCSUN9.0G 1129> Fixed Direct Access SCSI-2 device da7: 100.000MB/s transfers, Tagged Queueing Enabled da7: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da8 at isp0 bus 0 target 17 lun 0 da8: <SEAGATE ST39102FCSUN9.0G 1129> Fixed Direct Access SCSI-2 device da8: 100.000MB/s transfers, Tagged Queueing Enabled da8: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da9 at isp0 bus 0 target 18 lun 0 da9: <SEAGATE ST39102FCSUN9.0G 1129> Fixed Direct Access SCSI-2 device da9: 100.000MB/s transfers, Tagged Queueing Enabled da9: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da10 at isp0 bus 0 target 19 lun 0 da10: <SEAGATE ST39102FCSUN9.0G 1129> Fixed Direct Access SCSI-2 device da10: 100.000MB/s transfers, Tagged Queueing Enabled da10: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da11 at isp0 bus 0 target 20 lun 0 da11: <SEAGATE ST39102FCSUN9.0G 1129> Fixed Direct Access SCSI-2 device da11: 100.000MB/s transfers, Tagged Queueing Enabled da11: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da12 at isp0 bus 0 target 21 lun 0 da12: <SEAGATE ST39102FCSUN9.0G 1129> Fixed Direct Access SCSI-2 device da12: 100.000MB/s transfers, Tagged Queueing Enabled da12: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) da13 at isp0 bus 0 target 22 lun 0 da13: <SEAGATE ST39102FCSUN9.0G 1129> Fixed Direct Access SCSI-2 device da13: 100.000MB/s transfers, Tagged Queueing Enabled da13: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C) Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:da0a ? List valid disk boot devices <empty line> Abort manual input mountroot> panic: Root mount failed, startup aborted. cpuid = 0; syncing disks, buffers remaining... done Uptime: 37s Automatic reboot in 15 seconds - press a key on the console to abort --> Press a key on the console to reboot, --> or switch off the system now. ---clip clip--- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-sparc" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15907.48650.256866.392460>