Date: Thu, 23 Jan 2003 18:56:32 +0100 From: Eric Masson <e-masson@kisoft-services.com> To: Mailing List FreeBSD Mobile <freebsd-mobile@FreeBSD.org> Subject: Inspiron 4150, newcard issues Message-ID: <86k7gvsqb3.fsf@notbsdems.interne.kisoft-services.com>
next in thread | raw e-mail | index | archive | help
--=-=-=
Hello,
I'm running 5.0-RC2 (soon to be upgraded to RELENG_5_0) on an Inspiron
4150.
I'm facing problems with 2 pccards :
- DLink DM560 faxmodem
When inserting card, kernel outputs the following lines :
pcib2: device pccard1 requested decoded memory range 0xf4000000-0xfbffffff
pccard1: Card has no functions!
cbb1: PC Card card activation failed
No sio device is added the list.
- 3Com 3C562D/3C563D
When inserting card, kernel outputs the following lines :
pcib2: device pccard1 requested decoded memory range 0xf4000000-0xfbffffff
pccard1: CIS version PCCARD 2.0 or 2.1
pccard1: CIS info: 3Com Corporation, 3C562D/3C563D, EtherLink III, LAN+Modem PC Card
pccard1: Manufacturer code 0x101, product 0x562
pccard1: function 0: network adapter, ccr addr 1800 mask 3ff
pccard1: function 0, config table entry 7: I/O card; irq mask ffff; iomask 4, iospace 0-f; io8 io16 irqlevel
pccard1: function 1: serial port, ccr addr 1900 mask 3ff
pccard1: function 1, config table entry 7: I/O card; irq mask 86b8; iomask 3, iospace 2f8-2ff; mwait_required rdybsy_active io8 irqlevel powerdown audio
pccard1: function 1, config table entry 23: I/O card; irq mask 86b8; iomask 3, iospace 2e8-2ef; mwait_required rdybsy_active io8 irqlevel powerdown audio
pccard1: function 1, config table entry 39: I/O card; irq mask 86b8; iomask 3, iospace 0-7; mwait_required rdybsy_active io8 irqlevel powerdown audio
pcib2: device pccard1 requested decoded I/O range 0x100-0xffffffff
pcib2: device pccard1 requested decoded memory range 0xf4000000-0xfbffffff
ep0: <3Com 3c562 33.6 Modem/10Mbps Ethernet> at port 0x100-0x10f irq 11 function 0 config 7 on pccard1
pcib2: device ep0 requested decoded I/O range 0x100-0x10f
ep0: eeprom failed to come ready.
ep0: eeprom failed to come ready.
ep0: eeprom failed to come ready.
ep0: Pass 1 of 2 detection failed (nonfatal) id 0x0
ep0: eeprom failed to come ready.
ep0: Unit failed to come ready or product ID unknown! (id 0x0)
pcib2: device pccard1 requested decoded I/O range 0x100-0x10f
device_probe_and_attach: ep0 attach returned 6
pcib2: device pccard1 requested decoded I/O range 0x2f8-0x2ff
pccard1: Allocation failed for cfe 7
pcib2: device pccard1 requested decoded I/O range 0x2e8-0x2ef
pcib2: device pccard1 requested decoded memory range 0xf4000000-0xfbffffff
sio4 at port 0x2e8-0x2ef irq 11 function 1 config 23 on pccard1
pcib2: device sio4 requested decoded I/O range 0x2e8-0x2ef
pcib2: device pccard1 requested decoded I/O range 0x2e8-0x2ef
pcib2: device sio4 requested decoded I/O range 0x2e8-0x2ef
sio4: type 16550A with a bogus IIR_TXRDY register
sio4: unable to activate interrupt in fast mode - using normal mode
pcib2: device pccard1 requested decoded I/O range 0x2e8-0x2ef
No ep device is added to the list, but sio4 added.
Other cards like Aironet 350, 3Com 3C575, Psion Gold Card Global
56K/Fax/Isdn are probed fine.
Any idea ?
I've attached uname -a, dmesg -v and dumpcis of the cards made on a 4.7-STABLE
box.
Regards
Eric Masson
uname -a
--=-=-=
Content-Disposition: attachment; filename=uname.txt
FreeBSD 5.0-RC2 FreeBSD 5.0-RC2 #0: Wed Dec 18 13:43:24 GMT 2002 root@hollin.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC i386
--=-=-=
dmesg -v
--=-=-=
Content-Disposition: attachment; filename=dmesg.txt
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RC2 #0: Wed Dec 18 13:43:24 GMT 2002
root@hollin.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06ae000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc06ae0b4.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc06ae160.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc06ae20c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06ae2b8.
Preloaded elf module "/boot/kernel/radeon.ko" at 0xc06ae364.
Calibrating clock(s) ... TSC clock: 1694412280 Hz, i8254 clock: 1193119 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 1694508240 Hz
CPU: Pentium 4 (1694.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xffffffffbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,<b31>>
real memory = 536748032 (511 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x006d5000 - 0x1ffd9fff, 529551360 bytes (129285 pages)
avail memory = 514244608 (490 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xbfee
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
Initializing GEOMetry subsystem
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00
00 01 00 02 00 01 19 01 00 01 2f 01 00 01 34 01
00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01
94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01
VESA: 60 mode(s) found
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc0628c22 (1000022)
VESA: ATI MOBILITY RADEON 7500
VESA: ATI Technologies Inc. P7 01.00
null: <null device, zero device>
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086)
Using $PIR table, 11 entries at 0xc00fbb90
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 2 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 1 A 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 2 8 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 12 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 12 B 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 12 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 12 D 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 8 0 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 8 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.31.0
\\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.31.1
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.31.2
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.31.3
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.29.0
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.1
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.29.2
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.2.0
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.1.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.31.0
\\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.31.1
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.31.2
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.31.3
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.29.0
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.1
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.29.2
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.2.0
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.1.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e8000000, size 26, enabled
found-> vendor=0x8086, dev=0x1a30, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1a31, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000bf80, size 5, enabled
found-> vendor=0x8086, dev=0x2482, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
found-> vendor=0x8086, dev=0x2448, revid=0x42
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248c, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 000001f0, size 3, enabled
map[14]: type 4, range 32, base 000003f4, size 2, enabled
map[18]: type 4, range 32, base 00000170, size 3, enabled
map[1c]: type 4, range 32, base 00000374, size 2, enabled
map[20]: type 4, range 32, base 0000bfa0, size 4, enabled
found-> vendor=0x8086, dev=0x248a, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 0000d800, size 8, enabled
map[14]: type 4, range 32, base 0000dc80, size 6, enabled
found-> vendor=0x8086, dev=0x2485, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type 4, range 32, base 0000d400, size 8, enabled
map[14]: type 4, range 32, base 0000dc00, size 7, enabled
found-> vendor=0x8086, dev=0x2486, revid=0x02
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
agp0: <Intel 82845 host to AGP bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xfc000000-0xfdffffff
pcib1: prefetched decode 0xe0000000-0xe7ffffff
---- initial configuration ------------------------
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 1.0.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base e0000000, size 27, enabled
map[14]: type 4, range 32, base 0000c000, size 8, enabled
map[18]: type 1, range 32, base fcff0000, size 16, enabled
found-> vendor=0x1002, dev=0x4c57, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x01a7, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
drm0: <ATI Radeon LW Mobility 7 (AGP)> port 0xc000-0xc0ff mem 0xfcff0000-0xfcffffff,0xe0000000-0xe7ffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xe8000000 64MB
info: [drm] Initialized radeon 1.1.1 20010405 on minor 0
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 16
pcib2: I/O decode 0xe000-0xffff
pcib2: memory decode 0xf4000000-0xfbffffff
pcib2: prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.0
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.1
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.2
\\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 2.3.0
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.3.1
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.0.0
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.8.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.0
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.1
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.2
\\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 2.3.0
\\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.3.1
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.0.0
\\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.8.0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 4, range 32, base 0000ec80, size 7, enabled
map[14]: type 1, range 32, base f8fffc00, size 7, enabled
found-> vendor=0x10b7, dev=0x9200, revid=0x78
bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x104c, dev=0xac51, revid=0x00
bus=2, slot=1, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x104c, dev=0xac51, revid=0x00
bus=2, slot=1, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0xf8fffc7f irq 11 at device 0.0 on pci2
pcib2: device xl0 requested decoded I/O range 0xec80-0xecff
xl0: Ethernet address: 00:08:74:98:ed:65
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00105a, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
cbb0: <TI1420 PCI-CardBus Bridge> at device 1.0 on pci2
pcib2: device cbb0 requested decoded memory range 0xf4000000-0xfbffffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: matched entry for 2.1.INTA (source \\_SB_.PCI0.LNKD)
pcib2: slot 1 INTA is routed to irq 11
cbb1: <TI1420 PCI-CardBus Bridge> at device 1.1 on pci2
pcib2: device cbb1 requested decoded memory range 0xf4000000-0xfbffffff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib2: matched entry for 2.1.INTA (source \\_SB_.PCI0.LNKD)
pcib2: slot 1 INTA is routed to irq 11
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xbfa0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xbfa8
ata1: mask=03 ostat0=50 ostat2=00
ata1-slave: ATAPI 00 00
ata1-master: ATAPI 14 eb
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel 82801CA (ICH3)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 11 at device 31.5 on pci0
pcm0: ac97 codec id 0x4352595b
pcm0: ac97 codec features mic channel, tone, simulated stereo, bass boost, 20 bit DAC, 18 bit ADC, 5 bit master volume, SRS 3D Stereo Enhancement
pcm0: ac97 primary codec extended features variable rate PCM, variable rate mic, AMAP
pcm0: sndbuf_setmap 8d5000, 4000; 0xdba77000 -> 8d5000
pcm0: sndbuf_setmap 8d9000, 4000; 0xdba7b000 -> 8d9000
pcm0: sndbuf_setmap 905000, 4000; 0xdba7f000 -> 905000
pci0: <simple comms> at device 31.6 (no driver attached)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x280-0x287,0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xcf000-0xcf7ff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
ad0: success setting UDMA5 on Intel chip
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad0: <IC25N030ATCS04-0/CA3OA72A> ATA-5 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <HL-DT-STCD-RW/DVD-ROM GCC-4240N/D110> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 47999 Hz, will use 48000 Hz
MBR Slice 1 on ad0:
0000 00 01 01 00 84 fe 3f 7f 3f 00 00 00 41 60 1f 00 |......?.?...A`..|
[0] f:00 typ:132 s(CHS):0/1/1 e(CHS):127/254/63 s:63 l:2056257
GEOM: Add ad0s1, start 32256 length 1052803584 end 1052835839
MBR Slice 2 on ad0:
0000 80 ff ff ff a5 0f ff ff 00 fe 1f 00 40 40 5e 03 |............@@^.|
[1] f:80 typ:165 s(CHS):255/255/255 e(CHS):255/15/255 s:2096640 l:56508480
GEOM: Add ad0s2, start 1073479680 length 28932341760 end 30005821439
GEOM: Add ad0s2 hot[0] start 512 length 276 end 787
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 1052123136 end 1320558591
GEOM: Configure ad0s2c, start 0 length 28932341760 end 28932341759
GEOM: Configure ad0s2d, start 1320558592 length 27611783168 end 28932341759
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
pcib2: device pccard1 requested decoded memory range 0xf4000000-0xfbffffff
pccard1: Card has no functions!
cbb1: PC Card card activation failed
pcib2: device pccard1 requested decoded memory range 0xf4000000-0xfbffffff
pccard1: CIS version PCCARD 2.0 or 2.1
pccard1: CIS info: 3Com Corporation, 3C562D/3C563D, EtherLink III, LAN+Modem PC Card
pccard1: Manufacturer code 0x101, product 0x562
pccard1: function 0: network adapter, ccr addr 1800 mask 3ff
pccard1: function 0, config table entry 7: I/O card; irq mask ffff; iomask 4, iospace 0-f; io8 io16 irqlevel
pccard1: function 1: serial port, ccr addr 1900 mask 3ff
pccard1: function 1, config table entry 7: I/O card; irq mask 86b8; iomask 3, iospace 2f8-2ff; mwait_required rdybsy_active io8 irqlevel powerdown audio
pccard1: function 1, config table entry 23: I/O card; irq mask 86b8; iomask 3, iospace 2e8-2ef; mwait_required rdybsy_active io8 irqlevel powerdown audio
pccard1: function 1, config table entry 39: I/O card; irq mask 86b8; iomask 3, iospace 0-7; mwait_required rdybsy_active io8 irqlevel powerdown audio
pcib2: device pccard1 requested decoded I/O range 0x100-0xffffffff
pcib2: device pccard1 requested decoded memory range 0xf4000000-0xfbffffff
ep0: <3Com 3c562 33.6 Modem/10Mbps Ethernet> at port 0x100-0x10f irq 11 function 0 config 7 on pccard1
pcib2: device ep0 requested decoded I/O range 0x100-0x10f
ep0: eeprom failed to come ready.
ep0: eeprom failed to come ready.
ep0: eeprom failed to come ready.
ep0: Pass 1 of 2 detection failed (nonfatal) id 0x0
ep0: eeprom failed to come ready.
ep0: Unit failed to come ready or product ID unknown! (id 0x0)
pcib2: device pccard1 requested decoded I/O range 0x100-0x10f
device_probe_and_attach: ep0 attach returned 6
pcib2: device pccard1 requested decoded I/O range 0x2f8-0x2ff
pccard1: Allocation failed for cfe 7
pcib2: device pccard1 requested decoded I/O range 0x2e8-0x2ef
pcib2: device pccard1 requested decoded memory range 0xf4000000-0xfbffffff
sio4 at port 0x2e8-0x2ef irq 11 function 1 config 23 on pccard1
pcib2: device sio4 requested decoded I/O range 0x2e8-0x2ef
pcib2: device pccard1 requested decoded I/O range 0x2e8-0x2ef
pcib2: device sio4 requested decoded I/O range 0x2e8-0x2ef
sio4: type 16550A with a bogus IIR_TXRDY register
sio4: unable to activate interrupt in fast mode - using normal mode
pcib2: device pccard1 requested decoded I/O range 0x2e8-0x2ef
sio4: detached
acpi_cmbat1: battery initialization failed, giving up
--=-=-=
dumpcis of the 3c562
--=-=-=
Content-Disposition: attachment; filename=3c562d.txt
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x15 (Version 1 info), length = 66
000: 04 01 33 43 6f 6d 20 43 6f 72 70 6f 72 61 74 69
010: 6f 6e 00 33 43 35 36 32 44 2f 33 43 35 36 33 44
020: 00 45 74 68 65 72 4c 69 6e 6b 20 49 49 49 00 4c
030: 41 4e 2b 4d 6f 64 65 6d 20 50 43 20 43 61 72 64
040: 00 ff
Version = 4.1, Manuf = [3Com Corporation], card vers = [3C562D/3C563D]
Addit. info = [EtherLink III],[LAN+Modem PC Card]
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 01 01 62 05
PCMCIA ID = 0x101, OEM ID = 0x562
Tuple #4, code = 0x6 (Long link to next chain for MFC), length = 11
000: 02 00 91 00 00 00 00 bd 00 00 00
Function 0: attribute memory, address 0x91
Function 1: attribute memory, address 0xbd
Tuple #5, code = 0x1a (Configuration map), length = 6
000: 05 09 00 18 ff 03
Reg len = 2, config register addr = 0x1800, last config = 0x9
Registers: XXXXXXXX XX------
Tuple #6, code = 0x1b (Configuration entry), length = 15
000: c9 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff ff
Config index = 0x9(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 3 x 10mA
Max current average over 10 ms: 5 x 10mA
Power down supply current: 5 x 1mA
Wait scale Speed = 7.0 x 100 ns
RDY/BSY scale Speed = 5.0 x 100 us
Card decodes 4 address lines, full 8/16 Bit I/O
IRQ modes: Level
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #7, code = 0x1b (Configuration entry), length = 7
000: 09 01 71 55 26 26 54
Config index = 0x9
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 2 x 100mA
Max current average over 10 ms: 2 x 100mA
Power down supply current: 5 x 1mA
Tuple #8, code = 0x17 (Attribute memory descriptor), length = 3
000: 43 02 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = OFF
Speed = 150nS, Memory block size = 8Kb, 1 units
Tuple #9, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #10, code = 0x10 (Checksum), length = 5
000: 7a ff 8f 00 00
Checksum from offset 65402, length 143, value is 0x0
Tuple #11, code = 0xff (Terminator), length = 0
2 slots found
--=-=-=
dumpcis of the dm560
--=-=-=
Content-Disposition: attachment; filename=dm560.txt
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x15 (Version 1 info), length = 32
000: 04 01 49 6e 74 65 6c 6c 69 67 65 6e 74 00 50 43
010: 4d 43 49 41 20 46 41 58 2b 4d 4f 44 45 4d 00 ff
Version = 4.1, Manuf = [Intelligent], card vers = [PCMCIA FAX+MODEM]
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 00 02 01 00
PCMCIA ID = 0x200, OEM ID = 0x1
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 02 00
Serial port/modem
Tuple #5, code = 0x22 (Functional EXT), length = 4
000: 00 02 0f 5c
Serial interface extension:
16550 UART, Parity - Space,Mark,Odd,Even
Data bit - 7bit,8bit, Stop bit - 1bit,2bit
Tuple #6, code = 0x22 (Functional EXT), length = 9
000: 05 1f 1f 00 04 00 00 04 00
Data modem interface capabilities:
Tuple #7, code = 0x22 (Functional EXT), length = 9
000: 06 1f 1f 00 04 00 00 04 00
Fax/modem interface capabilities:
Tuple #8, code = 0x22 (Functional EXT), length = 12
000: 02 06 00 3f 1c 03 03 0f 07 00 01 b5
Data modem services available:
Tuple #9, code = 0x22 (Functional EXT), length = 8
000: 13 06 00 1f 00 02 00 b5
Fax1/modem services available:
Tuple #10, code = 0x22 (Functional EXT), length = 8
000: 23 06 00 1f 00 02 00 b5
Fax2/modem services available:
Tuple #11, code = 0x1a (Configuration map), length = 5
000: 01 27 80 ff 67
Reg len = 2, config register addr = 0xff80, last config = 0x27
Registers: XXX--XX-
Tuple #12, code = 0x1b (Configuration entry), length = 19
000: cf 41 99 79 55 3d 86 46 26 4c aa 60 f8 03 07 f0
010: bc 86 28
Config index = 0xf(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 3.5 x 10mA
Max current average over 1 second: 1 x 100mA, ext = 0x46
Max current average over 10 ms: 2 x 100mA
Power down supply current: 4.5 x 1mA
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3f8 block length = 0x8
IRQ modes: Level, Pulse, Shared
IRQs: 2 3 4 5 7 9 10 15
Max twin cards = 0
Misc attr: (Audio-BVD2) (Power down supported)
Tuple #13, code = 0x1b (Configuration entry), length = 7
000: 17 08 aa 60 f8 02 07
Config index = 0x17
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2f8 block length = 0x8
Tuple #14, code = 0x1b (Configuration entry), length = 7
000: 1f 08 aa 60 e8 03 07
Config index = 0x1f
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3e8 block length = 0x8
Tuple #15, code = 0x1b (Configuration entry), length = 7
000: 27 08 aa 60 e8 02 07
Config index = 0x27
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2e8 block length = 0x8
Tuple #16, code = 0xff (Terminator), length = 0
2 slots found
--=-=-=
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
--
VR> y'en a vraiment qui manquent pas d'air.
Alors là, je m'insurge !
Il ne manque certainement pas d'air, comme toutes les baudruches.
-+- RG in <http://www.le-gnu.net>; -+- Il est pas beau druche ? -+-
--=-=-=--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86k7gvsqb3.fsf>