Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 20 Mar 2000 18:01:13 +0100
From:      "Morten Seeberg" <ml@seeberg.dk>
To:        <stable@freebsd.org>
Subject:   psm mouse = psmintr errors on 4.0R
Message-ID:  <030401bf928d$e6e6c270$deff58c1@sos>

next in thread | raw e-mail | index | archive | help
Hi, my 4.0-RELEASE finds the PS/2 mouse just fine, but when I try to
configure the mouse daemon in sysinstall, i get the error below on my
console and in my logs (se the end of dmesg).

All the info I could find searching the archives and the website relate to
older versions of FreeBSD. I running 4.0R on an IBM PC300PL (P200-MMX) with
an IBM Intellimouse (the one with the little clitoris :) ).

Any ideas?

DMESG:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #1: Sun Mar 19 22:09:39 CET 2000
    root@sos-wks.cma.dk:/usr/src/sys/compile/SOS-WKS
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P55C (199.43-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 100663296 (98304K bytes)
avail memory = 93745152 (91548K bytes)
Preloaded elf kernel "kernel" at 0xc039f000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xfff0-0xffff at device 1.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371SB (PIIX3) USB controller> at 1.2 irq 11
pci0: <Matrox MGA 1024SG/1064SG/1164SG graphics accelerator> at 5.0 irq 9
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0x5000-0x501f mem
0x6000000
0-0x600fffff,0x60100000-0x60100fff irq 10 at device 6.0 on pci0
fxp0: Ethernet address 00:60:94:8f:5e:8f
fxp0: supplying EUI64: 00:60:94:ff:fe:8f:5e:8f
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: cannot reserve I/O port range
pcm0: <CS423x> at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0 on
isa0
unknown0: <Disabled> on isa0
unknown1: <CTRL> at port 0x120-0x127 on isa0
ad0: 4028MB <Maxtor 84320D5> [8184/16/63] at ata0-master using WDMA2
acd0: CDROM <MATSHITA CR-585> at ata1-master using PIO3
Mounting root from ufs:/dev/ad0s1a
fxp0: starting DAD for fe80:0001::0260:94ff:fe8f:5e8f
fxp0: DAD complete for fe80:0001::0260:94ff:fe8f:5e8f - no duplicates found
psmintr: out of sync (0008 != 0000).
psmintr: out of sync (0008 != 0000).
psmintr: out of sync (00c8 != 0000).
psmintr: out of sync (00c8 != 0000).
psmintr: out of sync (0008 != 0000).
psmintr: out of sync (00c8 != 0000).
psmintr: out of sync (00c8 != 0000).
psmintr: out of sync (0008 != 0000).
psmintr: out of sync (0008 != 0000).
psmintr: out of sync (00c8 != 0000).
psmintr: out of sync (00c8 != 0000).
psmintr: out of sync (0008 != 0000).
psmintr: out of sync (00c8 != 0000).
psmintr: out of sync (00c8 != 0000).
psmintr: out of sync (0008 != 0000).
psmintr: out of sync (00c8 != 0000).
psmintr: out of sync (00c8 != 0000).
psmintr: out of sync (0008 != 0000).
psmintr: out of sync (00c8 != 0000).
psmintr: out of sync (00c8 != 0000).

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/\/\orten $eeberg, Systems Consultant @
Merkantildata - Enterprise Solutions
#echo 'System Administrators suck :)' > /dev/console



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?030401bf928d$e6e6c270$deff58c1>