Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 16 Jul 2004 00:34:46 +0400
From:      breath <breath@unix.net>
To:        freebsd-hackers@freebsd.org
Subject:   Reboots after "OR AL,1  MOV CR0, EAX" on some computers.
Message-ID:  <opsa64r8l1s5rhgt@smtp.hotpop.com>

next in thread | raw e-mail | index | archive | help
Hi. I need some help. I think you'll be interested. I develop a little OS
that will boot from floppy. It's still under construction and has about
five thousand lines of assembly source now. I use Bochs emulator to debug
it and after that I test it on my real computer. I have all working
correctly on my compter. But I started to test it around other machines
recently and encountered a problem I can't solve. But I'm sure there are
lot of minds in FreeBSD world who know how to help me. I can't figure out
what happens because on my computer I get all things well, but I can't
conduct test of this kind on other computers.

Here is the problem. My OS's boot loader (after loading the main module)
switches CPU to very limited protected mode and jumps to module's entry
point. After it, main module reloads all tables like GDT etc to make a
good free environment for initialization and further running. Shortly: ON
SOME COMPUTERS (MAYBE CPUS) I GET REBOOTING JUST ON 'JMP' INSTRUCTION
AFTER PE BIT IS ENABLED. I've got no reboots on all i386, i486, i586
computers that I tryed to boot from. I have a Pentium III Celeron
(Coppermine) 900MHz - no reboots. Also tested on some Pentium II 400MHz -
no reboots. But on other side Pentium IV (don't remember speed) gave me a
reboot. And other computer I was not able to see processor model (maybe
PentiumIV !?) gave me a reboot too. Using endless loop stop points I
figured out that reboot is before any instruction pointed by 'protected'
label and that reboot happens after setting the PE bit.

Here's very diminished boot sector code that reflects the error. It must
be compiled with nasm as a binary so that result will be a floppy disk
image file. Then it must be written to a floppy from scratch (from boot
sector). Created floppy is expected to be bootable disk.

Normal:
When you boot from the floppy you get something like black screen and
computer hangs up (but not reboots)

Abnormal:
When you boot from the floppy you get a screen splash and then back to
reboot POST procedure.

Here goes the code. PLEASE, even if you're not interested in this
'puzzle':( MAKE AND TEST IT ON YOUR COMPUTER. EMAIL ME RESULTS AND
COMPUTER MODEL.

It was HARD work to make this OS. I believe that some people understand me
and will give me a clue. From my side I'll show them the full version.

;---------------------------------------------------------------------

; Compile: %nasm thisfile.asm -o fd
; Insert a floppy
; Write (as root): #dd if=fd of=/dev/fd0

org 0x7C00	; Expecting to be loaded at 7C00 by BIOS

bits 16

real:
	cli
	xor	ax, ax
	mov	ss, ax
	mov	sp, 0x7C00	; Temp stack just under myself

	call	real_open_A20	; For 32 bit address space
	call	real_init_gdt	; Load GDTR

	mov	eax, cr0
	or	al, 0x1		; cr0 |= PE
	mov	cr0, eax
; If I place 'jmp $' here all computers stop here normally
	jmp	0x10: protected

real_open_A20:
.l1:	in al, 0x64
	test al, 0x2
	jnz .l1
	mov al, 0xD1
	out 0x64, al
.l2:	in al, 0x64
	test al, 0x2
	jnz .l2
	mov al, 0xDF
	out 0x60, al
	ret

real_init_gdt:
	lgdt	[.gdtr]
	ret
.gdt0	dw	0x0000, 0x0000, 0x0000, 0x0000
.data	dw	0xFFFF, 0x0000, 0x9200, 0x00CF
.code	dw	0xFFFF, 0x0000, 0x9800, 0x00CF
.gdtr	dw	$ - .gdt0 - 1
	dd	.gdt0

bits 32

protected:
; Wherever I place 'jmp $' after the 'protected' label,
; on some computers I get reboot to hell.
; (In that case CS:IP is never points to 'jmp $'
; - something happens before)
	mov	ax, 0x8
	mov	ds, ax
	mov	es, ax
	mov	fs, ax
	mov	gs, ax
	mov	ss, ax
	mov	esp, 0x7C00
	jmp	$

times 512 - 2 - ($ - $$) db 0	; Fill the rest of sector
dw 0xAA55	; Bootable sector sign

times 1474560 - ($ - $$) db 0	; Fill the rest of floppy

;---------------------------------------------------------------------

Best regards,
Yuri Grebenkin
breath@unix.net



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?opsa64r8l1s5rhgt>