Date: Wed, 21 Nov 2001 12:15:11 -0500 From: "Joe & Fhe Barbish" <barbish@a1poweruser.com> To: <pjklist@ekahuna.com> Cc: "FBSD Questions" <questions@FreeBSD.ORG> Subject: RE: 4.4-Release install hangs Message-ID: <LPBBIGIAAKKEOEJOLEGOCEFNCHAA.barbish@a1poweruser.com> In-Reply-To: <3BFB5D29.30517.125426D@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
Redo the original install from CD and when you go into the hardware selection GUI, verify that you do not have any irq conflicts. IE: delete all the nic cards and all disks except IDE drive ad0 -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Philip J. Koenig Sent: Wednesday, November 21, 2001 10:52 AM To: Joe & Fhe Barbish Cc: questions@FreeBSD.ORG Subject: RE: 4.4-Release install hangs Thanks for the snappy reply. I tried scroll-lock earlier, doesn't have any effect. The last line on the screen (the one I presume it is hanging on) doing a verbose boot is: > isa_probe_children: probing PnP devices There are no ISA cards installed. The rest of the messages that are visible look OK. When given the opportunity to configure the kernel (before it tries probing hardware and hangs) I remove all of the unused kernel drivers, with the exception of the "pc card controller", which I tried both leaving and removing. (I assume that refers to what we used to call the "PCMCIA controller") I have the parallel port disabled in the BIOS (no need for it), I wonder if that throws the install for a loop? Any further insight appreciated. Phil On 21 Nov 2001, at 10:35, Joe & Fhe Barbish boldly uttered: > Phil you need to post more info about the error. Do this. > > When the FBSD boot process starts it will stop and issue message to hit > enter to continue or any other key for command prompt. Hit space bare to go > into command line. On command line enter command boot -v the -v option > will generate verbose messages (IE long winded messages about boot process). > When system hangs hit keyboard scroll lock key to freeze buffer and them use > up arrow to scroll boot messages on screen looking for message that may give > you a pointer as to what is the problem. Post that boot log here so people > have something to look at to help you. > > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Philip J. Koenig > Sent: Wednesday, November 21, 2001 10:15 AM > To: questions@FreeBSD.ORG > Subject: 4.4-Release install hangs > > I have a system here I'm trying to install 4.4-Release on, and it > keeps hanging during the initial boot at the same place - right after > it probes the serial/parallel ports. Can someone tell me what piece > of hardware is likely the problem here? Must be something it's > probing? > > This is an ASUS P2-L97 (440 LX chipset) board with embedded Adaptec > SCSI. (Booting from an ATAPI CDROM) > > Thanks, > > > Phil > > > -- > Philip J. Koenig pjklist@ekahuna.com > Electric Kahuna Systems -- Computers & Communications for the New Millenium > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- Philip J. Koenig pjklist@ekahuna.com Electric Kahuna Systems -- Computers & Communications for the New Millenium To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?LPBBIGIAAKKEOEJOLEGOCEFNCHAA.barbish>