Date: Sun, 25 Jul 2004 16:26:19 -0400 From: PJ Pesanka <pjp@thebeautifulbasket.com> To: sos@freebsd.org Cc: freebsd-current@freebsd.org Subject: Re: FAILURE - ATAPI_RESET no interrupt in newer current Message-ID: <20040725202619.GA31610@sundown.pesanka.zoominternet.net> In-Reply-To: <4103F55F.6000006@DeepCore.dk> References: <1090364563.728.3.camel@klamath.syndrom23.de> <38a23c3604072109046e63cdd9@mail.gmail.com> <20040725134142.GA28739@mimoza.pantel.net> <4103F55F.6000006@DeepCore.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Jul 25, 2004 at 08:01:03PM +0200, Søren Schmidt wrote: > Could you get me the output from the boot that fails ? backtrace ? > Also a complete dmesg from the working kernel and the output from > pciconf -l would be helpfull. > Without any of the above I have nothing to go by to help you.. I have a Compaq Presrio 2100 laptop which is having the same problem. This occurs during the device probe where the FAILURE - ATAPI_RESET is shown in the working dmesg. Please let me know if I can provide any more information PJ Fatal trap 12: page fault while in kernel mode fault virtual address»··= 0x3c fault code»·»···= supervisor read, page not present instruction pointer»= 0x8:0xc043b9ca stack pointer»·· = 0x10:0xc0821c84 frame pointer»·· = 0x10:0xc0821cdc code segment»···»···= base 0x0, limit 0xfffff, type 0x1b »···»···»···= DPL 0, pres 1, def32 1, gran 1 processor eflags»···= interrupt enabled, resume, IOPL = 0 current process»»···= 0 (swapper) [thread 0] Stopped at ata_generic_transaction+0x6a6: testb $0x1,0x3c(%eax) db> trace ata_generic_transaction(c16f19d8) at ata_generic_transaction+0x6a6 ata_start(c1439e00,c1439f20,0,c062ff82,57) at ata_start+0x17b ata_queue_request(c16f19d8,c,0,14,8) at ata_queue_request+0x185 ata_controlcmd(c1439ea8,8,0,0,0,0) at ata_controlcmd+0x80 ata_identify_devices(c1439e00) at ata_identify_devices+0x11c ata_boot_attach(0) at ata_boot_attach+0x27 run_interrupt_driven_config_hooks(0,81ec00,81e000,0,c042ef05) at run_interrupt_driven_config_hook mi_startup() at mi_startup+0x96 begin() at begin+0x2c db>· laptop# pciconf -l hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0xcab01002 rev=0x13 hdr=0x00 pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x700f1002 rev=0x01 hdr=0x01 ohci0@pci0:2:0: class=0x0c0310 card=0x0024103c chip=0x523710b9 rev=0x03 hdr=0x00 pcm0@pci0:6:0: class=0x040100 card=0x0024103c chip=0x545110b9 rev=0x02 hdr=0x00 isab0@pci0:7:0: class=0x060100 card=0x153310b9 chip=0x153310b9 rev=0x00 hdr=0x00 none0@pci0:8:0: class=0x070300 card=0x0024103c chip=0x545710b9 rev=0x00 hdr=0x00 cbb0@pci0:10:0: class=0x060700 card=0x00000000 chip=0x69721217 rev=0x00 hdr=0x02 fwohci0@pci0:12:0: class=0x0c0010 card=0x0024103c chip=0x8026104c rev=0x00 hdr=0x00 atapci0@pci0:16:0: class=0x0101b0 card=0x0024103c chip=0x522910b9 rev=0xc4 hdr=0x00 none1@pci0:17:0: class=0x068000 card=0x0024103c chip=0x710110b9 rev=0x00 hdr=0x00 sis0@pci0:18:0: class=0x020000 card=0x0024103c chip=0x0020100b rev=0x00 hdr=0x00 drm0@pci1:5:0: class=0x030000 card=0x0024103c chip=0x43361002 rev=0x00 hdr=0x00 none2@pci2:0:0: class=0x020000 card=0x33021186 chip=0x818010ec rev=0x20 hdr=0x00 FreeBSD 5.2-CURRENT #1: Fri Jul 23 02:22:30 EDT 2004 WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: mobile AMD Athlon(tm) XP1800+ (1523.92-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x680 Stepping = 0 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR, SSE> AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!> real memory = 468647936 (446 MB) avail memory = 453070848 (432 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard acpi0: [GIANT-LOCKED] acpi0: Power Button (fixed) acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU (2 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 drm0: <ATI Radeon RS100 Mobility U1> port 0x9000-0x90ff mem 0xd0100000-0xd010ffff,0xe0000000-0xefffffff irq 9 at device 5.0 on pci1 info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xd0004000-0xd0004fff irq 9 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcm0: <Acer Labs M5451> port 0x8400-0x84ff mem 0xd0005000-0xd0005fff irq 5 at device 6.0 on pci0 pcm0: <Conexant CX20468 AC97 Codec> pcm0: [GIANT-LOCKED] isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <simple comms> at device 8.0 (no driver attached) cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> irq 10 at device 10.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 0xd0000000-0xd0003fff,0xd0007000-0xd00077ff irq 9 at device 12.0 on pci0 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:0b:cd:00:9e:86:74:14 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:0b:cd:86:74:14 fwe0: Ethernet address: 02:0b:cd:86:74:14 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x8080-0x808f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 16.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached) sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x8c00-0x8cff mem 0xd0008000-0xd0008fff irq 11 at device 18.0 on pci0 sis0: Silicon Revision: DP83816A miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:0b:cd:86:95:84 acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 0 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xdb000-0xdbfff,0xcf000-0xcf7ff,0xc0000-0xcefff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1523916033 Hz quality 800 Timecounters tick every 10.000 msec cardbus0: Expecting link target, got 0xcc cardbus0: Resource not specified in CIS: id=10, size=100 cardbus0: Resource not specified in CIS: id=14, size=200 cardbus0: <network, ethernet> at device 0.0 (no driver attached) cbb0: CardBus card activation failed ad0: 28615MB <IC25N030ATCS04-0> [58140/16/63] at ata0-master PIO4 ata1-master: FAILURE - ATAPI_RESET no interrupt acd0: CDRW <TOSHIBA DVD-ROM SD-R2312> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s2a ad0: WARNING - WRITE_MUL write data underrun 8192>4096
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040725202619.GA31610>