Date: Sat, 17 Jun 2000 13:02:04 +0200 From: Ernst de Haan <ernst@jollem.com> To: Otter <otterr@telocity.com> Cc: Greg <greg@fqdn.com>, freeBSD-questions@FreeBSD.ORG Subject: Re: SMP/SCSI boot issue Message-ID: <20000617130203.A77191@c187104187.telekabel.chello.nl> In-Reply-To: <Pine.BSF.4.21.0006170618100.9058-100000@kashmir.telocity.com>; from otterr@telocity.com on Sat, Jun 17, 2000 at 06:23:59AM %2B0000 References: <002601bfd82f$c0501700$82358acc@tyan> <Pine.BSF.4.21.0006170618100.9058-100000@kashmir.telocity.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Otter wrote: > I've seen that before. Back when I had my dual PPro, it was an Intel > PR440FX motherboard. It didn't like my Adaptec 2940 U2W controller. I > never got it to work so I put it in another machine and left that one > IDE. I do know of others with the onboard scsi controller which seems to > work fine. My old 1542CF worked ok on that board too, but that's a step > backward. > -Otter Well, my PCI Adaptec 2940 U2W works just fine in my single processor system (P2-400, 128 MB, BX chipset) Ernst > On Sat, 17 Jun 2000, Greg wrote: > > > Hi, > > I'm new to the world of freebsd. After > > installing the system the first thing I did was > > recompile the kernel. The system would hang > > during boot when it probed the scsi devices. > > Thinking I removed too much from the kern config, > > I started on what would be 2 of 5 compiles to get > > a working kernel, they all would hang at the same > > place. In an effort to see what the issue was, I > > compiled the GENERIC but not befor removing the > > hash marks befor the SMP config options. Kernel > > still hangs. Any ideas would be great. thanks > > for your time. > > > > Machine: > > dual pentium pro 200, intel chipset/mb. > > adaptec 2940 ultrawide. > > IBM DRS hd.scsi > > Sony CD player.scsi > > Matrox video > > 5 Intel Pro100 NICS (ports... 2 of them are dual). > > FreeBSD 4.0 > > 296 megs. > > HS Serial card. > > > > > > part of the error: (it cycles like this for an > > hour or so, then the box will reboot.) > > > > waiting 15 seconds for SCSI devices to settle > > SMP: AP CPU #1 LAUNCHED! > > Timeout: SCB handled by another timeout > > (probe2:ahc0:0:2:0):scb0xc-timed out while idle > > SEQ ADDR==0x9 > > Queuing a BDR SCB > > > > please let me know if you might need any > > additional information. thanks! > > > > Greg > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000617130203.A77191>