Date: Thu, 17 Jul 2008 16:09:05 +0200 From: Bernd Walter <ticso@cicely7.cicely.de> To: Stanislav Sedov <stas@freebsd.org> Cc: src-committers@freebsd.org, cvs-src@freebsd.org, Bernd Walter <ticso@cicely7.cicely.de>, cvs-all@freebsd.org, arm@freebsd.org, Jeremie Le Hen <jeremie@le-hen.org>, ticso@cicely.de Subject: Re: cvs commit: src Makefile.inc1 src/gnu/lib Makefile src/gnu/lib/csu Makefile src/gnu/lib/libssp Makefile src/lib/csu Makefile.inc src/lib/libc Makefile src/lib/libstand Makefile src/lib/libthr Makefile src/libexec/rtld-elf Makefile src/release Makefile ... Message-ID: <20080717140905.GX35340@cicely7.cicely.de> In-Reply-To: <20080715225443.GM35340@cicely7.cicely.de> References: <200806252138.m5PLcajG067917@repoman.freebsd.org> <20080707155017.6850f3a5.stas@FreeBSD.org> <20080711211909.GB33517@obiwan.tataz.chchile.org> <20080714234809.32cb8042.stas@FreeBSD.org> <20080715210512.GK35340@cicely7.cicely.de> <20080716021322.52f895c9.stas@FreeBSD.org> <20080715225443.GM35340@cicely7.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jul 16, 2008 at 12:54:46AM +0200, Bernd Walter wrote: > On Wed, Jul 16, 2008 at 02:13:22AM +0400, Stanislav Sedov wrote: > > On Tue, 15 Jul 2008 23:05:14 +0200 > > Bernd Walter <ticso@cicely7.cicely.de> mentioned: > > > > > On Mon, Jul 14, 2008 at 11:48:09PM +0400, Stanislav Sedov wrote: > > > > On Fri, 11 Jul 2008 23:19:09 +0200 > > > > Jeremie Le Hen <jeremie@le-hen.org> mentioned: > > > > > > > > > Would you mind testing it with WITHOUT_SSP= at the top of lib/libc/Makefile? > > > > > > > > > > > > > I'll try tomorrow. Currently, I have no access to the board. > > > > > > Is it this kind of problem: > > > ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to accept, logging unlimited > > > SD CARD: 1023934464 bytes > > > mmcsd0: <mmc or sd flash card> on mmc0 > > > mmc0: setting transfer rate to 30.000MHz > > > Trying to mount root from ufs:/dev/mmcsd0s1a > > > pid 20 (sh), uid 0: exited on signal 11 > > > Jul 15 23:01:14 init: /bin/sh on /etc/rc terminated abnormally, going to single user mode > > > Enter full pathname of shell or RETURN for /bin/sh: > > > > > > This happens for me with recent kernel and few days old 7-stable > > > userland, so it shouldn't have anything to do with installed libc. > > > > > > > Seems to be the same problem. However, it seems that just using libc > > compiled w/out SSP solves it, although I haven't tested the entire > > world yet. > > Mmm... > But don't have the SSP change at all, since I still have a 7-stable > userland. > Static compiled binaries (/rescue) works fine. Strange enough disabling SSP did make a difference, but I still have problems at some point: Trying to mount root from ufs:/dev/mmcsd0s1a Loading configuration files. usb_new_device: set address 2 failed - trying a port reset No suitable dump device was found. usb_new_device: set address 2 failed - trying a port reset Entropy harvesting: interrupts ethernet point_to_pointusb_new_device: set address 2 failed - trying a port reset usbd_new_device: addr=2, getting first desc failed uhub_explore: usb_new_device failed, error=IOERROR uhub0: device problem (IOERROR), disabling port 2 kickstart. swapon: adding /dev/mmcsd0s1b as swap device Starting file system checks: /dev/mmcsd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mmcsd0s1a: clean, 264157 free (25021 frags, 29892 blocks, 6.0% fragmentation) pid 59 (mount), uid 0: exited on signal 11 (core dumped) Segmentation fault (core dumped) Mounting root filesystem rw failed, startup aborted ERROR: ABORTING BOOT (sending SIGTERM to parent)! Jul 17 16:04:26 init: /bin/sh on /etc/rc terminated abnormally, going to single user mode Enter full pathname of shell or RETURN for /bin/sh: I'll try more recent code. Maybe I got something bad. -- B.Walter <bernd@bwct.de> http://www.bwct.de Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080717140905.GX35340>