Date: Wed, 05 Jun 2002 00:34:49 -0500 From: Greg Panula <greg.panula@dolaninformation.com> To: Alessandro de Manzano <adm@unixmania.net> Cc: freebsd-stable@freebsd.org Subject: Re: Intel Pro/100+ Dual Port NIC card (711269) Message-ID: <3CFDA2F9.AFEBA594@dolaninformation.com> References: <3CFC2116.1040900@quack.kfu.com> <3CFCBA6B.B6E604C0@dolaninformation.com> <20020604191722.A32957@libero.sunshine.ale>
next in thread | previous in thread | raw e-mail | index | archive | help
Alessandro de Manzano wrote: > > are these the 'server' versions or what ? Intel PRO/100 S Dual ? > > I would buy a Dell poweredge 350 (1U rack) but I'ld sure if such boards > are well supported :-) > Quick-specs on the DL360 can be found at: http://www.compaq.com/products/servers/proliantdl360/description.html#quickspecs Compaq lists the NIC as Two Compaq NC3163 Fast Ethernet NIC Embedded 10/100 WOL (Wake On LAN). So, they might just be seperate embedded nics. The dual-port card is Compaq's NC3134. Info on that can be found at: http://www.compaq.com/products/servers/networking/NC3134/index.html My DL360 is a little older than the currently available model and the dual-port card is something I "salavaged" from another older machine. From the boot-up messages it looks like all four ports are using Intel's 82555 ASIC. I'm not sure which ASIC/chipset is on the latest Intel PRO/100 S Dual. According to the specs on the NC3134, the latest Intel ASIC is 82559. Maybe see if you get an eval unit of the Intel PRO/100 S Dual? Here is the boot-up message involving the nics. fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x4000-0x403f mem 0xc6a00000-0xc6afffff,0xc6bff000-0xc6bfffff irq 7 at device 4.0 on pci3 fxp0: Ethernet address 00:02:a5:8b:d4:dd inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x4040-0x407f mem 0xc6800000-0xc68fffff,0xc69ff000-0xc69fffff irq 10 at device 5.0 on pci3 fxp1: Ethernet address 00:02:a5:8b:d4:dc inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib2: <DEC 21154 PCI-PCI bridge> at device 6.0 on pci3 pci4: <PCI bus> on pcib2 fxp2: <Intel Pro 10/100B/100+ Ethernet> port 0x5000-0x503f mem 0xc6e00000-0xc6efffff,0xc6fff000-0xc6ffffff irq 11 at device 4.0 on pci4 fxp2: Ethernet address 00:02:a5:5c:f6:78 inphy2: <i82555 10/100 media interface> on miibus2 inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp3: <Intel Pro 10/100B/100+ Ethernet> port 0x5040-0x507f mem 0xc6c00000-0xc6cfffff,0xc6dff000-0xc6dfffff irq 11 at device 5.0 on pci4 fxp3: Ethernet address 00:02:a5:5c:f6:79 inphy3: <i82555 10/100 media interface> on miibus3 inphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Cheers, Greg To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3CFDA2F9.AFEBA594>