Date: Wed, 31 Jan 2007 14:20:21 GMT From: Warren Baker <warren@wred.co.za> To: freebsd-usb@FreeBSD.org Subject: Re: usb/91906: FreeBSD hangs while booting with USB legacy support on (MSI 865PE Neo2-P) Message-ID: <200701311420.l0VEKLaL085972@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR usb/91906; it has been noted by GNATS.
From: Warren Baker <warren@wred.co.za>
To: bug-followup@FreeBSD.org, yazar256@yahoo.fr
Cc:
Subject: Re: usb/91906: FreeBSD hangs while booting with USB legacy support
on (MSI 865PE Neo2-P)
Date: Wed, 31 Jan 2007 11:49:10 +0200
This is a multi-part message in MIME format.
--------------090705020106010804070604
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hi,
I also am having a similar problem and not sure whether to log a
separate bug entry for this. In any case the problem is that I have
tried to install FreeBSD 6.1 and FreeBSD 6.2 without any luck on a Dell
OptiPlex 320. However it hangs in the boot process once it probes the
usb port the usb keyboard is plugged into.
Details as follows:
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfff7000
ioapic0: routing intpin 16 (PCI IRQ16) to vector 50
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xdfff8000-0xdfff8fff irq 17
at device 19.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfff8000
ioapic0: routing intpin 7 (PCI IRQ 17) to vector 51
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
At this stage it just hangs.
If i boot the PC without the keyboard plugged in and then plug it in
once all the usb ports have been probed by FreeBSD it then picks up the
keyboard and I can install FreeBSD. That is the usb keyboard is plugged
in after the following section in the boot phase:
usb5: waiting for BIOS to give up control
usb5: EHCI version 1.0
usb5: compnaion controllers, 2 ports each: usb0 usb1 usb2 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 10 ports with 10 removable, self powered
.
.
.
Obviously once it reboots, it hangs again in the same place if the
keyboard is left in.
I cant test without USB legacy support as the Dell BIOS doesnt offer
this option, nor have the luxury of trying to use a PS2 keyboard.
I have tried booting with safe mode as well, but no luck. I also tried
creating a 6.1 ISO without OHCI support and just EHCI and UHCI support
and still no luck.
I then recompiled the kernel and created a 6.1 ISO with just UHCI
support (no EHCI or OHCI support) and the box then booted ok and i could
install the OS.
I did not try this approach with 6.2, but im assuming ti would probably
behave the same.
I have attached a dmesg from a successful 6.2 boot when the keyboard was
plugged in after the usb ports had been probed (this is with the GENERIC
kernel).
By the way I also notice that it reports a bad signature in the MP
config table - which you can see in the dmesg. Please let me know if you
need anything else.
Thanks,
Warren
--------------090705020106010804070604
Content-Type: text/plain; x-mac-type="0"; x-mac-creator="0";
name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.txt"
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
mptable_probe: MP Config Table has bad signature: \^V\M-+\M-p
ACPI APIC Table: <DELL B8K >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 3.06GHz (3066.79-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf49 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x651d<SSE3,RSVD2,MON,DS_CPL,TM2,CNTX-ID,CX16,<b14>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
real memory = 233160704 (222 MB)
avail memory = 218603520 (208 MB)
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.1> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL B8K > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
atapci0: <GENERIC ATA controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfecf mem 0xdfff6c00-0xdfff6fff irq 22 at device 18.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xdfff7000-0xdfff7fff irq 16 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xdfff8000-0xdfff8fff irq 17 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xdfff9000-0xdfff9fff irq 18 at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xdfffa000-0xdfffafff irq 17 at device 19.3 on pci0
ohci3: [GIANT-LOCKED]
usb3: OHCI version 1.0, legacy support
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xdfffb000-0xdfffbfff irq 18 at device 19.4 on pci0
ohci4: [GIANT-LOCKED]
usb4: OHCI version 1.0, legacy support
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfff6900-0xdfff69ff irq 19 at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
usb5: waiting for BIOS to give up control
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 10 ports with 10 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xdc80-0xdcbf mem 0xdfcbc000-0xdfcbcfff,0xdfcc0000-0xdfcdffff irq 21 at device 1.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:0e:0c:b8:f9:08
fxp1: <Intel 82550 Pro/100 Ethernet> port 0xdcc0-0xdcff mem 0xdfcbd000-0xdfcbdfff,0xdfce0000-0xdfcfffff irq 22 at device 2.0 on pci2
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:0e:0c:b8:f8:7b
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xdfcbe000-0xdfcbffff irq 21 at device 9.0 on pci2
miibus2: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus2
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:18:8b:88:64:6e
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xcbfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: Microsoft Microsoft Internet Keyboard, rev 1.10/1.00, addr 2, iclass 3/1
kbd2 at ukbd0
uhid0: Microsoft Microsoft Internet Keyboard, rev 1.10/1.00, addr 2, iclass 3/1
Timecounter "TSC" frequency 3066792159 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <LITE-ON CD-ROM LTN-4891S/NDS3> at ata0-master UDMA33
ad4: 38146MB <WDC WD400BD-75MRA3 10.01E04> at ata2-master UDMA33
Trying to mount root from ufs:/dev/ad4s1a
--------------090705020106010804070604--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200701311420.l0VEKLaL085972>