Date: Wed, 26 Nov 2003 20:40:15 -0000 From: "Jonathan Gilpin" <jonathan@fluent.ltd.uk> To: <freebsd-bugs@freebsd.org> Cc: freebsd-stable@freebsd.org Subject: 4.9 Stable Crashes on SuperMicro with SMP Message-ID: <00a001c3b45d$7f3231a0$62c4033e@clarity>
next in thread | raw e-mail | index | archive | help
Hi there,
I am running:
FreeBSD sproggit.fluent.ltd.uk 4.9-STABLE FreeBSD 4.9-STABLE #8: Wed Nov =
26 19:48:53 GMT 2003 =
root@sproggit.fluent.ltd.uk:/usr/src/sys/compile/SPROGGIT i386
and it is a supermicro. I have a Dual Xeon System with 2GB of RAM:
The machine crashes within 30 minutes with errors as follows:
panic: vm_page_remove(): page not found in hash
mp_lock =3D 01000001; cpuid =3D 1; lapic.id =3D 01000000
boot() called on cpu#1
syncing disks...
I am willing to provide any further infomation needed and if this is not =
the right place to request help please redirect me.=20
Many Thanks,
Jonathan
The DMESG is:
sproggit# dmesg=20
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD 4.9-STABLE #8: Wed Nov 26 19:48:53 GMT 2003
root@sproggit.fluent.ltd.uk:/usr/src/sys/compile/SPROGGIT
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2400.11-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf27 Stepping =3D 7
=
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory =3D 2147418112 (2097088K bytes)
avail memory =3D 2088071168 (2039132K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
Programming 16 pins in IOAPIC #2
Programming 16 pins in IOAPIC #3
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 8, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 9, version: 0x000f0011, at 0xfec01000
io2 (APIC): apic id: 10, version: 0x000f0011, at 0xfec02000
io3 (APIC): apic id: 11, version: 0x000f0011, at 0xfec03000
Preloaded elf kernel "kernel" at 0xc0388000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
Using $PIR table, 11 entries at 0xc00f4fd0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
IOAPIC #1 intpin 12 -> irq 2
IOAPIC #1 intpin 10 -> irq 9
IOAPIC #1 intpin 13 -> irq 10
IOAPIC #1 intpin 1 -> irq 11
pci0: <PCI bus> on pcib0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port =
0xe000-0xe03f mem 0xfeb60000-0xfeb7ffff irq 2 at device 8.0 on pci0
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port =
0xe400-0xe43f mem 0xfeba0000-0xfebbffff irq 9 at device 9.0 on pci0
em1: Speed:N/A Duplex:N/A
pci0: <ATI Mach64-GR graphics accelerator> at 11.0 irq 10
atapci0: <Generic PCI ATA controller> port =
0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device =
15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 11 =
at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
isab0: <PCI to ISA bridge (vendor=3D1166 device=3D0227)> at device 15.3 =
on pci0
isa0: <ISA bus> on isab0
pcib255: <ServerWorks host to PCI bridge(unknown chipset)> on =
motherboard
pci255: <PCI bus> on pcib255
pcib1: <Host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem =
0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on =
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 =
intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
ad1: 32253MB <Maxtor 6E040L0> [65531/16/63] at ata0-slave BIOSDMA
ad3: 32253MB <Maxtor 6E040L0> [65531/16/63] at ata1-slave BIOSDMA
Mounting root from ufs:/dev/ad1s1a
WARNING: / was not properly dismounted
em0: Link is up 100 Mbps Full Duplex
Limiting closed port RST response from 201 to 200 packets per second
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00a001c3b45d$7f3231a0$62c4033e>