Date: Tue, 20 Aug 2002 21:43:14 +0000 From: michael harbour <michael.harbour@btopenworld.com> To: freebsd-hardware@FreeBSD.org Subject: Getting a Plextor CD Writer to work Message-ID: <D4A50C6E-B485-11D6-9D28-0030657B06A4@btopenworld.com>
next in thread | raw e-mail | index | archive | help
I've been having some trouble trying to get a Plextor PX-S88TU CDWriter
to work on my Toshiba Satellite 2060CDS laptop with FreeBSD 4.6
The computer has no other USB peripherals.
It does have a Netgear PCMCIA ethernet adapter and a parallel port ZIP
disc, which both work fine. I recompiled the kernel to accommodate the
zip disc, but the CDWriter didnt work before this either, so i dont
think it's relevant.
from what i understand of the boot process, it seems to be recognised
okay ....
>umass0: Plextor Corp. USB Storage Adapter, rev 2.00/3.01, addr 2
....but later on it's kind of rejected....
umass0: Phase Error, residue = 95
umass0: Phase Error, residue = 95
umass0: Phase Error, residue = 95
umass0: Phase Error, residue = 95
umass0: Phase Error, residue = 95
can anyone help me to sort this out please? cheers
Mike Harbour
here's the output of dmesg.....
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Tue Aug 20 00:24:16 BST 2002
root@:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (366.60-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 100466688 (98112K bytes)
avail memory = 92753920 (90580K bytes)
Preloaded elf kernel "kernel.prev" at 0xc04d3000.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
Using $PIR table, 5 entries at 0xc00fec60
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x11c1, dev=0x0441) at 7.0 irq 3
pci0: <S3 ViRGE MX graphics accelerator> at 8.0
ohci0: <NEC uPD 9210 USB controller> mem 0xf7fff000-0xf7ffffff irq 11 at
device 11.0 on pci0
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: Plextor Corp. USB Storage Adapter, rev 2.00/3.01, addr 2
chip1: <ESS Technology Maestro 2E Audio controller> port 0xff00-0xffff
irq 11 at device 12.0 on pci0
atapci0: <Generic PCI ATA controller> port 0x1800-0x180f at device 16.0
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
eisa0: <EISA bus> on motherboard
eisa0: unknown card @@@0000 (0x00000000) at slot 1
isa0: <ISA bus> on motherboard
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365SL-A/B> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus (classic)> on pcic0
pccard1: <PC Card bus (classic)> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus0
vpo0: PS2 mode
pccard: card inserted, slot 1
ad0: 4126MB <TOSHIBA MK4313MAT> [8944/15/63] at ata0-master BIOSDMA
umass0: Phase Error, residue = 95
umass0: Phase Error, residue = 95
umass0: Phase Error, residue = 95
umass0: Phase Error, residue = 95
umass0: Phase Error, residue = 95
da0 at vpo0 bus 0 target 6 lun 0
da0: <IOMEGA ZIP 100 K.05> Removable Direct Access SCSI-2 device
da0: 96MB (196608 512 byte sectors: 64H 32S/T 96C)
Mounting root from ufs:/dev/ad0s2a
ed1 at port 0x300-0x31f irq 10 flags 0x80000 slot 1 on pccard1
ed1: address 00:e0:98:86:e1:48, type Linksys (16 bit)
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ed1: device timeout
ed1: device timeout
ed1: device timeout
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?D4A50C6E-B485-11D6-9D28-0030657B06A4>