Date: Tue, 14 Jan 2003 22:50:45 -0800 From: Nicholas Esborn <nick@netdot.net> To: Kirill Bezzubets <kirill@solaris.ru> Cc: Lars Eggert <larse@ISI.EDU>, Nate Lawson <nate@root.org>, current@FreeBSD.ORG, mobile@FreeBSD.ORG Subject: Re: FreeBSD 5.0 and Dell notebooks Message-ID: <20030115065045.GA45556@carbon.berkeley.netdot.net> In-Reply-To: <20030115002356.GA87114@solaris.ru> References: <Pine.BSF.4.21.0301141229290.39326-100000@root.org> <3E248251.4050204@isi.edu> <20030115002356.GA87114@solaris.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
Hola,
I run CURRENT on a Dell Latitude C600 PP01L. I ran some tests to get
more detailed information. During these tests, I was running:
FreeBSD assisi 5.0-CURRENT FreeBSD 5.0-CURRENT #23: Sat Jan 11 17:19:32 PST=
2003 nick@assisi:/usr/obj/usr/src/sys/ASSISI i386
I ran acpiconf -s [1-5] and noted the results:
acpiconf -s 1:
The backlight remains on; kernel messages about the pccard ethernet
detaching; hard disk continues to spin; the power LED flashes once
per second. When I press the power button, the backlight turns OFF,
but the network card comes back up, the machine is network reachable,
and the console is usable blind.
acpiconf -s 2:
A console message (see below) rejects this operation.
acpiconf -s 3:
The hard disk spins down; the backlight remains on, but the screen
image dissolves slowly to solid white; the power LED flashes every
6 seconds or so. Upon pressing the power button, the screen image
returns, and then the backlight turns off about 1/4 second later.
Machine is reachable and console is usable blind.
acpiconf -s 4:
The machine goes to a formal-looking text mode warning that there is
no suspend-to-disk partition (which is true); after about 10 seconds,
the OS comes back up, the machine is network reachable, backlight
turns off, etc. However, when I logged in and rebooted the machine,
it dropped my connection but didn't actually reset. When I pushed
the power button, the backlight turned back on, and I could see that
FreeBSD had stopped waiting for vnlru. It did not move on after 60
seconds. Pushing the power button again turned off the machine.
acpiconf -s 5:
The machine appears to shut down gracefully.
=20
S1 log messages:
Jan 14 21:25:04 assisi kernel: tdkphy0: detached
Jan 14 21:25:05 assisi kernel: miibus0: detached
Jan 14 21:25:05 assisi kernel: xl0: detached
Jan 14 21:25:05 assisi kernel: wakeup from sleeping state (slept 00:02:02)
Jan 14 21:25:05 assisi kernel: ata0: resetting devices ..
Jan 14 21:25:05 assisi kernel: acpi_cmbat0: battery initialization start
Jan 14 21:25:05 assisi kernel: acpi_cmbat0: battery initialization done, tr=
ied 1
times
Jan 14 21:25:05 assisi kernel: acpi_cmbat1: battery initialization start
Jan 14 21:25:05 assisi kernel: acpi_cmbat1: battery initialization done, tr=
ied 1
times
Jan 14 21:25:05 assisi kernel: acpi_acad0: Notify 128
Jan 14 21:25:05 assisi kernel: done
Jan 14 21:25:05 assisi kernel: ata1: resetting devices ..
Jan 14 21:25:05 assisi kernel: done
Jan 14 21:25:05 assisi kernel: Manufacturer ID: 01015752
Jan 14 21:25:05 assisi kernel: Product version: 5.0
Jan 14 21:25:05 assisi kernel: Product name: 3Com Corporation | 3CCFE575CT =
| LAN
Cardbus Card | 004 |=20
Jan 14 21:25:05 assisi kernel: Functions: Network Adaptor, Memory
Jan 14 21:25:05 assisi kernel: CIS reading done
Jan 14 21:25:05 assisi kernel: cardbus0: Resource not specified in CIS: id=
=3D14, s
ize=3D80
Jan 14 21:25:05 assisi kernel: cardbus0: Resource not specified in CIS: id=
=3D18, s
ize=3D80
Jan 14 21:25:05 assisi kernel: xl0: <3Com 3c575C Fast Etherlink XL> port 0x=
1000-
0x103f mem 0x88002000-0x8800207f,0x88002080-0x880020ff irq 11 at device 0.0=
on c
ardbus0
Jan 14 21:25:05 assisi kernel: xl0: Ethernet address: 00:01:02:79:29:d4
Jan 14 21:25:05 assisi kernel: miibus0: <MII bus> on xl0
Jan 14 21:25:05 assisi kernel: tdkphy0: <TDK 78Q2120 media interface> on mi=
ibus0
Jan 14 21:25:05 assisi kernel: tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 1=
00bas
eTX-FDX, auto
S2 log messages:
Jan 14 21:31:55 assisi kernel: acpi0: AcpiGetSleepTypeData failed - AE_NOT_=
FOUND
S3 log messages:
Jan 14 21:34:24 assisi kernel: tdkphy0: detached
Jan 14 21:34:24 assisi kernel: miibus0: detached
Jan 14 21:34:24 assisi kernel: xl0: detached
Jan 14 21:34:25 assisi kernel: wakeup from sleeping state (slept 00:01:52)
Jan 14 21:34:25 assisi kernel: ata0: resetting devices ..
Jan 14 21:34:25 assisi kernel: done
Jan 14 21:34:25 assisi kernel: ata1: resetting devices ..
Jan 14 21:34:25 assisi kernel: done
Jan 14 21:34:25 assisi kernel: Manufacturer ID: 01015752
Jan 14 21:34:25 assisi kernel: Product version: 5.0
Jan 14 21:34:25 assisi kernel: Product name: 3Com Corporation | 3CCFE575CT =
| LAN
Cardbus Card | 004 |=20
Jan 14 21:34:25 assisi kernel: Functions: Network Adaptor, Memory
Jan 14 21:34:25 assisi kernel: CIS reading done
Jan 14 21:34:25 assisi kernel: cardbus0: Resource not specified in CIS: id=
=3D14, s
ize=3D80
Jan 14 21:34:25 assisi kernel: cardbus0: Resource not specified in CIS: id=
=3D18, s
ize=3D80
Jan 14 21:34:25 assisi kernel: xl0: <3Com 3c575C Fast Etherlink XL> port 0x=
1000-
0x103f mem 0x88002000-0x8800207f,0x88002080-0x880020ff irq 11 at device 0.0=
on c
ardbus0
Jan 14 21:34:25 assisi kernel: xl0: Ethernet address: 00:01:02:79:29:d4
Jan 14 21:34:25 assisi kernel: miibus0: <MII bus> on xl0
Jan 14 21:34:25 assisi kernel: tdkphy0: <TDK 78Q2120 media interface> on mi=
ibus0
Jan 14 21:34:25 assisi kernel: tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 1=
00bas
eTX-FDX, auto
S4 log messages:
Jan 14 21:39:36 assisi kernel: tdkphy0: detached
Jan 14 21:39:37 assisi kernel: miibus0: detached
Jan 14 21:39:37 assisi kernel: xl0: detached
Jan 14 21:39:37 assisi kernel: wakeup from sleeping state (slept 00:00:23)
Jan 14 21:39:37 assisi kernel: ata0: resetting devices ..
Jan 14 21:39:37 assisi kernel: done
Jan 14 21:39:37 assisi kernel: ata1: resetting devices ..
Jan 14 21:39:37 assisi kernel: done
Jan 14 21:39:37 assisi kernel: Manufacturer ID: 01015752
Jan 14 21:39:37 assisi kernel: Product version: 5.0
Jan 14 21:39:37 assisi kernel: Product name: 3Com Corporation | 3CCFE575CT =
| LAN
Cardbus Card | 004 |=20
Jan 14 21:39:37 assisi kernel: Functions: Network Adaptor, Memory
Jan 14 21:39:37 assisi kernel: CIS reading done
Jan 14 21:39:37 assisi kernel: cardbus0: Resource not specified in CIS: id=
=3D14, s
ize=3D80
Jan 14 21:39:37 assisi kernel: cardbus0: Resource not specified in CIS: id=
=3D18, s
ize=3D80
Jan 14 21:39:37 assisi kernel: xl0: <3Com 3c575C Fast Etherlink XL> port 0x=
1000-
0x103f mem 0x88002000-0x8800207f,0x88002080-0x880020ff irq 11 at device 0.0=
on c
ardbus0
Jan 14 21:39:37 assisi kernel: xl0: Ethernet address: 00:01:02:79:29:d4
Jan 14 21:39:37 assisi kernel: miibus0: <MII bus> on xl0
Jan 14 21:39:37 assisi kernel: tdkphy0: <TDK 78Q2120 media interface> on mi=
ibus0
Jan 14 21:39:37 assisi kernel: tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 1=
00bas
eTX-FDX, auto
I hope this info helps.
-nick
On Wed, Jan 15, 2003 at 03:23:56AM +0300, Kirill Bezzubets wrote:
> On Tue, Jan 14, 2003 at 01:34:09PM -0800, Lars Eggert wrote:
>=20
> I'm afraid it's not ATI-related. I have Latitude CPi with NeoMagic2160 -
> suspend works ok, but at resume screen goes on for a second and then off.
> ...
> Machine is live after resume too, blind reboot works ok.
> ...
> Another note: after resume I tried to work with the machine using ssh
> consoles - after some time (not so long - about minute or so) it complete=
ly
> hangs repeating some strange ACPI error. Sorry, can't repeat it for now
> and no traces left in dmesg/messages..
>=20
--=20
Nicholas Esborn
Unix Systems Administrator
Berkeley, California
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030115065045.GA45556>