Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 05 Jan 2004 13:32:36 +0200
From:      Evren Yurtesen <yurtesen@ispro.net.tr>
To:        freebsd-current@freebsd.org
Subject:   FreeBSD Crashes with AMD
Message-ID:  <3FF94B54.4050605@ispro.net.tr>

next in thread | raw e-mail | index | archive | help
My proxy server is crashing with random intervals. I wonder if it is 
possible to debug this? What is the procedure? Is there a web page 
explaining how I can extract enough information about this problem that 
a developer can look into it?

dmesg and few errors are below...

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Sat Jan  3 15:53:26 EET 2004
     toor@proxy.ispro.net.tr:/usr/obj/usr/src/sys/PROXY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0742000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc0742244.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07422f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2200+ (1813.30-MHz 686-class CPU)
   Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
   AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 1610547200 (1535 MB)
avail memory = 1572028416 (1499 MB)
Pentium Pro MTRR support enabled
VESA: v1.2, 1024k memory, flags:0x0, mode table:0xc00c4f04 (c0004f04)
VESA: S3 Incorporated. 86C775/86C785
module_register_init: MOD_LOAD (splash_bmp, 0xc06ec810, 0) error 2
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT VIA_K7  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 13 entries at 0xc00f7fb0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 5 INTA is routed to irq 11
pcib0: slot 7 INTA is routed to irq 10
pcib0: slot 11 INTA is routed to irq 12
pcib0: slot 13 INTA is routed to irq 10
pcib0: slot 14 INTA is routed to irq 5
pcib0: slot 15 INTB is routed to irq 5
pcib0: slot 17 INTC is routed to irq 12
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe03fffff at 
device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci0: <display, VGA> at device 5.0 (no driver attached)
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xe000-0xe03f mem 
0xdbfa0000-0xdbfbffff,0xdbfee000-0xdbfeefff irq 10 at device 7.0 on pci0
fxp0: Ethernet address 00:07:e9:0d:ea:4e
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bge0: <Broadcom BCM5788 Gigabit Ethernet, ASIC rev. 0x3003> mem 
0xdbf80000-0xdbf8ffff irq 12 at device 11.0 on pci0
bge0: Ethernet address: 00:0c:76:2a:07:91
miibus1: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus1
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
atapci0: <Promise PDC20378 SATA150 controller> port 
0xe400-0xe47f,0xe800-0xe80f,0xec00-0xec3f mem 
0xdbfc0000-0xdbfdffff,0xdbfef000-0xdbfeffff irq 10 at device 13.0 on pci0
atapci0: [MPSAFE]
ata2: at 0xdbfef000 on atapci0
ata2: [MPSAFE]
ata3: at 0xdbfef000 on atapci0
ata3: [MPSAFE]
ata4: at 0xdbfef000 on atapci0
ata4: [MPSAFE]
pci0: <serial bus, FireWire> at device 14.0 (no driver attached)
atapci1: <VIA 8237 SATA150 controller> port 
0xc400-0xc4ff,0xc800-0xc80f,0xcc00-0xcc03,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 
irq 5 at device 15.0 on pci0
atapci1: [MPSAFE]
ata5: at 0xd800 on atapci1
ata5: [MPSAFE]
ata6: at 0xd000 on atapci1
ata6: [MPSAFE]
atapci2: <VIA 8237 UDMA133 controller> port 0xfc00-0xfc0f at device 15.1 
on pci0
ata0: at 0x1f0 irq 14 on atapci2
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci2
ata1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cmd 3 failed at out byte 1 of 3
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROMs> at iomem 
0xe0000-0xe0fff,0xc9800-0xcafff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1813303916 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, 
default to accept, logging disabled
GEOM: create disk ad0 dp=0xc504f960
ad0: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata0-master UDMA133
GEOM: create disk ad10 dp=0xc5204860
ad10: 114473MB <ST3120026AS> [232581/16/63] at ata5-master UDMA100
GEOM: create disk ad12 dp=0xc5204760
ad12: 114473MB <ST3120026AS> [232581/16/63] at ata6-master UDMA100
Mounting root from ufs:/dev/ad0s1a


Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0x8
fault code              = supervisor read, page not present
instruction pointer     = 0x8:0xc0539cab
stack pointer           = 0x10:0xdf1dcacc
frame pointer           = 0x10:0xdf1dcae4
code segment            = base 0x0, limit 0xfffff, type 0x1b
                         = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 29 (swi1: net)
trap number             = 12
panic: page fault

syncing disks, buffers remaining... kernel trap 12 with interrupts disabled


Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0x24
fault code              = supervisor read, page not present
instruction pointer     = 0x8:0xc04cadfe
stack pointer           = 0x10:0xdf21bc80
frame pointer           = 0x10:0xdf21bca0
code segment            = base 0x0, limit 0xfffff, type 0x1b
                         = DPL 0, pres 1, def32 1, gran 1
processor eflags        = resume, IOPL = 0
current process         = 23 (irq12: bge0)
trap number             = 12
panic: page fault
Uptime: 2h31m43s



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FF94B54.4050605>