Date: Sun, 29 Feb 2004 18:29:44 -0500 From: "Mike Schreckengost" <mrpolitics@hotmail.com> To: freebsd-current@freebsd.org Subject: ata request_sense illegal request Message-ID: <Law9-F509v0utoZQCUi000230f3@hotmail.com>
next in thread | raw e-mail | index | archive | help
I am having *exactly* the same problem on my system. Without CDs in the drive, the system just hangs. With CDs in the drive, it boots (with errors, as shown below) but for some reason it suddenly locked up hard when starting KDE ... don't know if this is a related problem or not. 'boot -v' provides an endless string of: (probe0:ata1:0:0:0): Retrying Command ... messages (without CDs in the drive). I hope this helps, if anyone needs more information don't hesitate to ask. :-) Thanks, Mike Feb 29 18:16:00 ulb kernel: Copyright (c) 1992-2004 The FreeBSD Project. Feb 29 18:16:00 ulb kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 19 91, 1992, 1993, 1994 Feb 29 18:16:00 ulb kernel: The Regents of the University of California. All rig hts reserved. Feb 29 18:16:00 ulb kernel: FreeBSD 5.2-CURRENT #20: Sun Feb 29 17:31:10 EST 200 4 Feb 29 18:16:00 ulb kernel: root@ulb.home.net:/usr/obj/usr/src/sys/ULB Feb 29 18:16:00 ulb kernel: WARNING: WITNESS option enabled, expect reduced perf ormance. Feb 29 18:16:00 ulb kernel: Preloaded elf kernel "/boot/kernel/kernel" at 0xc09f b000. Feb 29 18:16:00 ulb kernel: Preloaded elf module "/boot/kernel/snd_emu10k1.ko" a t 0xc09fb294. Feb 29 18:16:00 ulb kernel: Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0x c09fb344. Feb 29 18:16:00 ulb kernel: Preloaded elf module "/boot/modules/nvidia.ko" at 0x c09fb3f0. Feb 29 18:16:00 ulb kernel: Preloaded elf module "/boot/kernel/linprocfs.ko" at 0xc09fb49c. Feb 29 18:16:00 ulb kernel: Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09 fb54c. Feb 29 18:16:00 ulb kernel: ACPI APIC Table: <PTLTD APIC > Feb 29 18:16:00 ulb kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Feb 29 18:16:00 ulb kernel: CPU: AMD Athlon(tm) MP 2100+ (1733.41-MHz 686-class CPU) Feb 29 18:16:00 ulb kernel: Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Feb 29 18:16:00 ulb kernel: Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX 8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> Feb 29 18:16:00 ulb kernel: AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!> Feb 29 18:16:00 ulb kernel: real memory = 1073217536 (1023 MB) Feb 29 18:16:00 ulb kernel: avail memory = 1040629760 (992 MB) Feb 29 18:16:00 ulb kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Feb 29 18:16:00 ulb kernel: cpu0 (BSP): APIC ID: 1 Feb 29 18:16:00 ulb kernel: cpu1 (AP): APIC ID: 0 Feb 29 18:16:00 ulb kernel: ioapic0 <Version 1.1> irqs 0-23 on motherboard Feb 29 18:16:00 ulb kernel: Pentium Pro MTRR support enabled Feb 29 18:16:00 ulb kernel: npx0: [FAST] Feb 29 18:16:00 ulb kernel: npx0: <math processor> on motherboard Feb 29 18:16:00 ulb kernel: npx0: INT 16 interface Feb 29 18:16:00 ulb kernel: acpi0: <PTLTD RSDT> on motherboard Feb 29 18:16:00 ulb kernel: pcibios: BIOS version 2.10 Feb 29 18:16:00 ulb kernel: Found $PIR table, 14 entries at 0xc00fdee0 Feb 29 18:16:00 ulb kernel: acpi0: Power Button (fixed) Feb 29 18:16:00 ulb kernel: acpi0: Sleep Button (fixed) Feb 29 18:16:00 ulb kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 Feb 29 18:16:00 ulb kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x80 08-0x800b on acpi0 Feb 29 18:16:00 ulb kernel: acpi_cpu0: <CPU> on acpi0 Feb 29 18:16:00 ulb kernel: acpi_cpu1: <CPU> on acpi0 Feb 29 18:16:00 ulb kernel: acpi_button0: <Power Button> on acpi0 Feb 29 18:16:00 ulb kernel: pcib0: <ACPI Host-PCI bridge> port 0x8080-0x80ff,0x8 000-0x807f,0xcf8-0xcff iomem 0xd8000-0xdbfff on acpi0 Feb 29 18:16:00 ulb kernel: pci0: <ACPI PCI bus> on pcib0 Feb 29 18:16:00 ulb kernel: agp0: <AMD 762 host to AGP bridge> port 0x1010-0x101 3 mem 0xeb200000-0xeb200fff,0xec000000-0xefffffff at device 0.0 on pci0 Feb 29 18:16:00 ulb kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 Feb 29 18:16:00 ulb kernel: pci1: <ACPI PCI bus> on pcib1 Feb 29 18:16:00 ulb kernel: nvidia0: <GeForce4 Ti 4600> mem 0xf8000000-0xf807fff f,0xf0000000-0xf7ffffff,0xe8000000-0xe8ffffff irq 17 at device 5.0 on pci1 Feb 29 18:16:00 ulb kernel: isab0: <PCI-ISA bridge> at device 7.0 on pci0 Feb 29 18:16:00 ulb kernel: isa0: <ISA bus> on isab0 Feb 29 18:16:00 ulb kernel: atapci0: <AMD 768 UDMA100 controller> port 0xf000-0x f00f at device 7.1 on pci0 Feb 29 18:16:00 ulb kernel: ata0: at 0x1f0 irq 14 on atapci0 Feb 29 18:16:00 ulb kernel: ata0: [MPSAFE] Feb 29 18:16:00 ulb kernel: ata1: at 0x170 irq 15 on atapci0 Feb 29 18:16:00 ulb kernel: ata1: [MPSAFE] Feb 29 18:16:00 ulb kernel: pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) Feb 29 18:16:00 ulb kernel: pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0 Feb 29 18:16:00 ulb kernel: pci2: <ACPI PCI bus> on pcib2 Feb 29 18:16:00 ulb kernel: pcm0: <Creative EMU10K1> port 0x2800-0x281f irq 16 a t device 4.0 on pci2 Feb 29 18:16:00 ulb kernel: pcm0: <SigmaTel STAC9708/11 AC97 Codec> Feb 29 18:16:00 ulb kernel: ohci0: <NEC uPD 9210 USB controller> mem 0xe9001000- 0xe9001fff irq 17 at device 5.0 on pci2 Feb 29 18:16:00 ulb kernel: usb0: OHCI version 1.0 Feb 29 18:16:00 ulb kernel: usb0: <NEC uPD 9210 USB controller> on ohci0 Feb 29 18:16:00 ulb kernel: usb0: USB revision 1.0 Feb 29 18:16:00 ulb kernel: uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Feb 29 18:16:00 ulb kernel: uhub0: 3 ports with 3 removable, self powered Feb 29 18:16:00 ulb kernel: ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, icl ass 3/1 Feb 29 18:16:00 ulb kernel: ums0: 3 buttons and Z dir. Feb 29 18:16:00 ulb kernel: umass0: Behavior Tech. Computer USB 2.0 Storage Devi ce, rev 2.00/1.03, addr 3 Feb 29 18:16:00 ulb kernel: ohci1: <NEC uPD 9210 USB controller> mem 0xe9002000- 0xe9002fff irq 18 at device 5.1 on pci2 Feb 29 18:16:00 ulb kernel: usb1: OHCI version 1.0 Feb 29 18:16:00 ulb kernel: usb1: <NEC uPD 9210 USB controller> on ohci1 Feb 29 18:16:00 ulb kernel: usb1: USB revision 1.0 Feb 29 18:16:00 ulb kernel: uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Feb 29 18:16:00 ulb kernel: uhub1: 2 ports with 2 removable, self powered Feb 29 18:16:00 ulb kernel: uscanner0: Canon CanoScan, rev 1.00/1.00, addr 2 Feb 29 18:16:00 ulb kernel: pci2: <serial bus, USB> at device 5.2 (no driver att ached) Feb 29 18:16:00 ulb kernel: atapci1: <HighPoint HPT370 UDMA100 controller> port 0x2000-0x20ff,0x2828-0x282b,0x2830-0x2837,0x282c-0x282f,0x2838-0x283f irq 18 at device 6.0 on pci2 Feb 29 18:16:00 ulb kernel: atapci1: [MPSAFE] Feb 29 18:16:00 ulb kernel: ata2: at 0x2838 on atapci1 Feb 29 18:16:00 ulb kernel: ata2: [MPSAFE] Feb 29 18:16:00 ulb kernel: ata3: at 0x2830 on atapci1 Feb 29 18:16:00 ulb kernel: ata3: [MPSAFE] Feb 29 18:16:00 ulb kernel: pci2: <display, VGA> at device 7.0 (no driver attach ed) Feb 29 18:16:00 ulb kernel: xl0: <3Com 3c980C Fast Etherlink XL> port 0x2400-0x2 47f mem 0xe9003400-0xe900347f irq 18 at device 8.0 on pci2 Feb 29 18:16:00 ulb kernel: xl0: Ethernet address: 00:e0:81:22:5b:f4 Feb 29 18:16:00 ulb kernel: miibus0: <MII bus> on xl0 Feb 29 18:16:00 ulb kernel: ukphy0: <Generic IEEE 802.3u media interface> on mii bus0 Feb 29 18:16:00 ulb kernel: ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX- FDX, auto Feb 29 18:16:00 ulb kernel: xl1: <3Com 3c980C Fast Etherlink XL> port 0x2480-0x2 4ff mem 0xe9003800-0xe900387f irq 19 at device 9.0 on pci2 Feb 29 18:16:00 ulb kernel: xl1: Ethernet address: 00:e0:81:22:5b:f5 Feb 29 18:16:00 ulb kernel: miibus1: <MII bus> on xl1 Feb 29 18:16:00 ulb kernel: ukphy1: <Generic IEEE 802.3u media interface> on mii bus1 Feb 29 18:16:00 ulb kernel: ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX- FDX, auto Feb 29 18:16:00 ulb kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x6 0 irq 1 on acpi0 Feb 29 18:16:00 ulb kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Feb 29 18:16:00 ulb kernel: kbd0 at atkbd0 Feb 29 18:16:00 ulb kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0 Feb 29 18:16:00 ulb kernel: sio0: type 16550A Feb 29 18:16:00 ulb kernel: sio1 port 0x2f8-0x2ff irq 3 on acpi0 Feb 29 18:16:00 ulb kernel: sio1: type 16550A Feb 29 18:16:00 ulb kernel: ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acp i0 Feb 29 18:16:00 ulb kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPA TIBLE mode Feb 29 18:16:00 ulb kernel: ppc0: FIFO with 16/16/9 bytes threshold Feb 29 18:16:00 ulb kernel: ppbus0: <Parallel port bus> on ppc0 Feb 29 18:16:00 ulb kernel: lpt0: <Printer> on ppbus0 Feb 29 18:16:00 ulb kernel: lpt0: Interrupt-driven port Feb 29 18:16:00 ulb kernel: fdc0: <Enhanced floppy controller (i82077, NE72065 o r clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 Feb 29 18:16:00 ulb kernel: fdc0: FIFO enabled, 8 bytes threshold Feb 29 18:16:00 ulb kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Feb 29 18:16:00 ulb kernel: orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xcf800 -0xcffff,0xcf000-0xcf7ff on isa0 Feb 29 18:16:00 ulb kernel: pmtimer0 on isa0 Feb 29 18:16:00 ulb kernel: sc0: <System console> at flags 0x100 on isa0 Feb 29 18:16:00 ulb kernel: sc0: VGA <16 virtual consoles, flags=0x300> Feb 29 18:16:00 ulb kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0x a0000-0xbffff on isa0 Feb 29 18:16:00 ulb kernel: Timecounters tick every 10.000 msec Feb 29 18:16:00 ulb kernel: afd0: REMOVABLE <IOMEGA ZIP 250 ATAPI> at ata0-maste r PIO3 Feb 29 18:16:00 ulb kernel: acd0: CDRW <CD-RW IDE5232> at ata0-slave PIO4 Feb 29 18:16:00 ulb kernel: acd1: CDRW <Memorex DVD+R/RW 2.4x8AA> at ata1-master PIO4 Feb 29 18:16:00 ulb kernel: ad3: 114473MB <WDC WD1200BB-00CAA1> [232581/16/63] a t ata1-slave UDMA100 Feb 29 18:16:00 ulb kernel: ad4: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] a t ata2-master UDMA100 Feb 29 18:16:00 ulb kernel: ad6: 76319MB <WDC WD800BB-00CAA0> [155061/16/63] at ata3-master UDMA100 Feb 29 18:16:00 ulb kernel: acd1: FAILURE - REQUEST_SENSE ILLEGAL REQUEST asc=0x 24 ascq=0x00 status=50<READY,DSC> error=0 Feb 29 18:16:00 ulb kernel: acd0: FAILURE - REQUEST_SENSE ILLEGAL REQUEST asc=0x 24 ascq=0x00 status=50<READY,DSC> error=0 Feb 29 18:16:00 ulb kernel: afd0: FAILURE - REQUEST_SENSE ILLEGAL REQUEST asc=0x 24 ascq=0x00 status=50<READY,DSC> error=0 Feb 29 18:16:00 ulb kernel: acd0: FAILURE - REQUEST_SENSE ILLEGAL REQUEST asc=0x 24 ascq=0x00 status=50<READY,DSC> error=0 Feb 29 18:16:00 ulb kernel: afd0: FAILURE - REQUEST_SENSE ILLEGAL REQUEST asc=0x 24 ascq=0x00 status=50<READY,DSC> error=0 Feb 29 18:16:00 ulb kernel: SMP: AP CPU #1 Launched! Feb 29 18:16:00 ulb kernel: da0 at ata0 bus 0 target 0 lun 0 Feb 29 18:16:00 ulb kernel: da0: <IOMEGA ZIP 250 42.S> Removable Direct Access S CSI-0 device Feb 29 18:16:00 ulb kernel: da0: 11.000MB/s transfers Feb 29 18:16:00 ulb kernel: da0: 239MB (489532 512 byte sectors: 64H 32S/T 239C) Feb 29 18:16:00 ulb kernel: cd2 at ata1 bus 0 target 0 lun 0 Feb 29 18:16:00 ulb kernel: cd2: <Memorex DVD+R/RW 2.4x8AA 1.51> Removable CD-RO M SCSI-0 device Feb 29 18:16:00 ulb kernel: cd2: 16.000MB/s transfers Feb 29 18:16:00 ulb kernel: cd2: cd present [1 x 2048 byte records] Feb 29 18:16:00 ulb kernel: cd1 at ata0 bus 0 target 1 lun 0 Feb 29 18:16:00 ulb kernel: cd1: <CDWRITER IDE5232 000F> Removable CD-ROM SCSI-0 device Feb 29 18:16:00 ulb kernel: cd1: 16.000MB/s transfers Feb 29 18:16:00 ulb kernel: cd1: cd present [104672 x 2048 byte records] Feb 29 18:16:00 ulb kernel: cd0 at umass-sim0 bus 0 target 0 lun 0 Feb 29 18:16:00 ulb kernel: cd0: <CDWRITER IDE5232 0009> Removable CD-ROM SCSI-0 device Feb 29 18:16:00 ulb kernel: cd0: 1.000MB/s transfers Feb 29 18:16:00 ulb kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Feb 29 18:16:00 ulb kernel: acd1: FAILURE - REQUEST_SENSE ILLEGAL REQUEST asc=0x 24 ascq=0x00 status=50<READY,DSC> error=0 Feb 29 18:16:00 ulb last message repeated 2 times Feb 29 18:16:00 ulb kernel: acd1: FAILURE - REQUEST_SENSE ILLEGAL REQUEST asc=0x 64 ascq=0x01 status=50<READY,DSC> error=0 Feb 29 18:16:00 ulb kernel: acd1: FAILURE - REQUEST_SENSE ILLEGAL REQUEST asc=0x 24 ascq=0x00 status=50<READY,DSC> error=0 Feb 29 18:16:00 ulb last message repeated 2 times Feb 29 18:16:00 ulb kernel: acd1: FAILURE - REQUEST_SENSE ILLEGAL REQUEST asc=0x 64 ascq=0x01 status=50<READY,DSC> error=0 Feb 29 18:16:00 ulb kernel: Mounting root from ufs:/dev/ad3s2a Paulius Bulotas <paulius@kaktusas.org> wrote: >Hello, > >after upgrading to new ata code (REQUEST_SENSE feature), I'm unable to >boot from disk without media in my cdrom ;) >Everything looks like: >acd0: CDRW <TOSHIBA DVD-ROM SD-R9012> at ata1-master UDMA33 >acd0: FAILURE - REQUEST_SENSE ILLEGAL REQUEST asc=0x24 ascq=0x00 >sks=0x40 0x00 0x01 status=50<READY,DSC> error=0 >and pause [if I boot with -v, I see a lot of >(probe0:ata1:0:0:0): Retrying Command >] > >after inserting cd, everything goes almost fine: >acd0: FAILURE - REQUEST_SENSE ILLEGAL REQUEST asc=0x24 ascq=0x00 >sks=0x40 0x00 0 _________________________________________________________________ Take off on a romantic weekend or a family adventure to these great U.S. locations. http://special.msn.com/local/hotdestinations.armx
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Law9-F509v0utoZQCUi000230f3>