Date: Tue, 30 Dec 2025 07:47:39 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: kib@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-main-amd64-test - Build #27519 - Failure Message-ID: <1321124535.873.1767080859764@jenkins.ci.freebsd.org> In-Reply-To: <728126282.861.1767076521925@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-main-amd64-test - Build #27519 (7685aaea8850f5b6995a17740a016019e0956c70) - Failure Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27519/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27519/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27519/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) efcb109940ca607130af4498e1e33b54c58ba43c by kib: vm_object_coalesce(): remove commented out code e7053d9a126a60b3c0b1348b6c5131b5f2025894 by kib: vm_object_coalesce(): simplify common expression 353ba3bf08fdef69b77e3e565435e50784a51412 by kib: vm_object_coalesce(): do not account holes twice 7685aaea8850f5b6995a17740a016019e0956c70 by kib: vm_object_coalesce(): return swap reservation back if overcharged The end of the build log: [...truncated 4.30 MiB...] epair1a: Ethernet address: 6e:f1:05:f3:ce:25 epair1b: Ethernet address: b2:b1:91:3f:83:36 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: promiscuous mode enabled epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair1b: promiscuous mode disabled epair1b: promiscuous mode enabled epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair1b: promiscuous mode disabled epair1b: promiscuous mode enabled epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair1b: promiscuous mode disabled epair1b: promiscuous mode enabled epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair1b: promiscuous mode disabled epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [22.989s] sys/netpfil/pf/mbuf:ethernet_in_mbuf_len -> epair0a: Ethernet address: d2:88:67:56:20:60 epair0b: Ethernet address: b6:15:5b:fb:88:7a epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [1.312s] sys/netpfil/pf/mbuf:inet6_in_mbuf_len -> epair0a: Ethernet address: 0e:bf:78:3e:f4:5e epair0b: Ethernet address: 06:bb:2e:e3:db:17 epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [5.654s] sys/netpfil/pf/mbuf:inet_in_mbuf_len -> epair0a: Ethernet address: be:4b:29:06:1e:dc epair0b: Ethernet address: 76:c3:ee:f6:58:7c epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [1.299s] sys/netpfil/pf/mld.py:TestMLD::test_router_alert -> epair0a: Ethernet address: ce:1f:8d:8d:e5:e7 epair0b: Ethernet address: 8a:ea:e6:4a:88:79 epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP epair0a: promiscuous mode enabled Invalid MLD epair0a: promiscuous mode disabled epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [6.873s] sys/netpfil/pf/modulate:modulate_v4 -> epair0a: Ethernet address: 4a:6b:8d:78:b0:34 epair0b: Ethernet address: 3a:cb:59:03:5a:46 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 1e:86:35:74:c8:28 epair1b: Ethernet address: 72:6c:76:79:2e:ed epair1a: link state changed to UP epair1b: link state changed to UP epair1b: promiscuous mode enabled epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair1b: promiscuous mode disabled epair1b: promiscuous mode enabled epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair1b: promiscuous mode disabled epair0b: link state changed to DOWN epair0a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [5.024s] sys/netpfil/pf/modulate:modulate_v6 -> epair0a: Ethernet address: 3e:e1:91:0c:81:92 epair0b: Ethernet address: 6a:e7:bb:39:9e:ed epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 3a:4c:20:2d:a0:47 epair1b: Ethernet address: 2e:1e:1f:e7:1d:83 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: promiscuous mode enabled epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair1b: promiscuous mode disabled epair1b: promiscuous mode enabled epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair1b: promiscuous mode disabled epair0b: link state changed to DOWN epair0a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [5.028s] sys/netpfil/pf/names:group -> epair0a: Ethernet address: fa:2b:6d:c2:5c:5d epair0b: Ethernet address: f2:af:34:58:c2:a2 epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.175s] sys/netpfil/pf/names:names -> epair0a: Ethernet address: 16:40:78:db:df:69 epair0b: Ethernet address: 52:c8:c5:cf:2a:76 epair0a: link state changed to UP epair0b: link state changed to UP epair0a: changing name to 'foo' epair0b: changing name to 'foo' foo: link state changed to DOWN foo: link state changed to DOWN passed [0.360s] sys/netpfil/pf/nat:binat_compat -> epair0a: Ethernet address: 7a:25:35:97:f9:0a epair0b: Ethernet address: 9e:3e:a5:ef:ba:dd epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 9a:a5:a7:17:77:3d epair1b: Ethernet address: 72:8d:48:a8:2c:da epair1a: link state changed to UP epair1b: link state changed to UP epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair1b: promiscuous mode enabled epair1b: promiscuous mode disabled epair0b: link state changed to DOWN epair0a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [2.135s] sys/netpfil/pf/nat:binat_match -> epair0a: Ethernet address: c2:9c:5c:c5:72:34 epair0b: Ethernet address: 3e:6a:12:30:9a:30 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 82:15:b9:74:38:90 epair1b: Ethernet address: 1a:62:30:0d:00:4f epair1a: link state changed to UP epair1b: link state changed to UP epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair1b: promiscuous mode enabled Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0x30 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff80cd17d8 stack pointer = 0x28:0xfffffe008be47c80 frame pointer = 0x28:0xfffffe008be47cf0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (epair_task) rdi: fffffe0082bf6a00 rsi: fffffe008be47c98 rdx: 0000000000000001 rcx: 0000000000000942 r8: 0000000000000002 r9: fffff80169b88880 rax: 0000000000000000 rbx: fffff80167798c00 rbp: fffffe008be47cf0 r10: 0000000000000000 r11: 0000000000000001 r12: fffff800034f6800 r13: fffff800237ba780 r14: fffff801482b5080 r15: 0000000000000000 trap number = 12 panic: page fault cpuid = 0 time = 1767080857 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008be479b0 vpanic() at vpanic+0x136/frame 0xfffffe008be47ae0 panic() at panic+0x43/frame 0xfffffe008be47b40 trap_pfault() at trap_pfault+0x47c/frame 0xfffffe008be47bb0 calltrap() at calltrap+0x8/frame 0xfffffe008be47bb0 --- trap 0xc, rip = 0xffffffff80cd17d8, rsp = 0xfffffe008be47c80, rbp = 0xfffffe008be47cf0 --- bpf_mtap() at bpf_mtap+0x98/frame 0xfffffe008be47cf0 ether_nh_input() at ether_nh_input+0x109/frame 0xfffffe008be47d40 netisr_dispatch_src() at netisr_dispatch_src+0xb4/frame 0xfffffe008be47da0 ether_input() at ether_input+0xd5/frame 0xfffffe008be47e00 epair_tx_start_deferred() at epair_tx_start_deferred+0xd4/frame 0xfffffe008be47e40 taskqueue_run_locked() at taskqueue_run_locked+0x1c2/frame 0xfffffe008be47ec0 taskqueue_thread_loop() at taskqueue_thread_loop+0xd3/frame 0xfffffe008be47ef0 fork_exit() at fork_exit+0x82/frame 0xfffffe008be47f30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008be47f30 --- trap 0, rip = 0, rsp = 0, rbp = 0 --- KDB: enter: panic [ thread pid 0 tid 100114 ] Stopped at kdb_enter+0x33: movq $0,0x1213e62(%rip) db:0:kdb.enter.panic> show pcpu cpuid = 0 dynamic pcpu = 0xa0b540 curthread = 0xfffff800237ba780: pid 0 tid 100114 critnest 1 "epair_task" curpcb = 0xfffff800237bacd0 fpcurthread = none idlethread = 0xfffff8010240c780: tid 100003 "idle: cpu0" self = 0xffffffff82610000 curpmap = 0xffffffff81d9f4a0 tssp = 0xffffffff82610384 rsp0 = 0xfffffe008be48000 kcr3 = 0x800000000259f002 ucr3 = 0xffffffffffffffff scr3 = 0x9ebdcd9f gs32p = 0xffffffff82610404 ldt = 0xffffffff82610444 tss = 0xffffffff82610434 curvnet = 0xfffff80169b88880 spin locks held: db:0:kdb.enter.panic> reset Uptime: 1h11m9s + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-27519' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./auto-shutdown x ./disable-dtrace-tests.sh x ./run.sh x ./disable-notyet-tests.sh x ./run-kyua.sh x ./disable-zfs-tests.sh + rm -f test-report.txt test-report.xml + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins2368961234637833731.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '7685aaea8850f5b6995a17740a016019e0956c70', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: main/latest_tested/amd64/amd64 -> ../../7685aaea8850f5b6995a17740a016019e0956c70/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1321124535.873.1767080859764>