Date: Mon, 5 May 2003 22:02:42 -0400 (EDT) From: Charlie Livingston <charlie@sysninjas.com> To: FreeBSD-gnats-submit@FreeBSD.org Subject: alpha/51824: Booting 5.0-RELEASE install cd with IDE HDD causes unexpected machine check Message-ID: <20030506020242.BD13A63@labyrinth.cs.rogers.wave.ca> Resent-Message-ID: <200305060210.h462A5Pp031419@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 51824
>Category: alpha
>Synopsis: Booting 5.0-RELEASE install cd with IDE HDD causes unexpected machine check
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-alpha
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon May 05 19:10:05 PDT 2003
>Closed-Date:
>Last-Modified:
>Originator: Charlie Livingston
>Release: FreeBSD 5.0-RELEASE alpha
>Organization:
>Environment:
System: FreeBSD burns 5.0-RELEASE FreeBSD 5.0-RELEASE #0: Fri Jan 17 01:14:51 GMT 2003 root@mithlond.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC alpha
>Description:
The install CD for 5.0 Release, will cause a machine check on my Alpha 164LX system
if booted with an IDE Hard Drive attached to the on-board controller. The attached
IDE CD-ROM drive works fine, and will run sysinstall if I disconnect the hard drive,
but with the drive connected, the machine dies with the following:
----
unexpected machine check:
mces = 0x1
vector = 0x660
param = 0xfffffc0000006068
pc = 0xfffffc0000398b80
ra = 0xfffffc0000398b74
curproc = 0xfffffc0000744e70
pid = 0, comm = swapper
panic: machine check
cpuid = 0;
syncing disks, buffers remaining...
done
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
-----
What follows is the the full boot log (from power on to machine check)
-----
*** keyboard not plugged in...
ff.fe.fd.fc.fb.fa.f9.f8.f7.f6.f5.f3.f2.f1.f0.
ef.ee.ed.probing hose 0, PCI
probing PCI-to-PCI bridge, bus 2
probing PCI-to-ISA bridge, bus 1
bus 2, slot 4 -- eia -- Intel 8255x Ethernet
bus 2, slot 5 -- eib -- Intel 8255x Ethernet
bus 0, slot 11 -- dqa -- CMD PCI0646 IDE
bus 0, slot 11 -- dqb -- CMD PCI0646 IDE
ec.f4.eb.ea.e9.e8.e7.
Digital AlphaPC 164LX 533 MHz Console V5.8-1, Jun 21 2000 11:28:32
CPU 0 booting
usage is boot <device> [-file <file>] [-flags <flags>]
>How-To-Repeat:
Boot the 5.0 install CD on a 164LX system with an IDE HDD attached.
>Fix:
?
>Release-Note:
>Audit-Trail:
>Unformatted:
>>>show dev
dqa0.0.0.11.0 DQA0 QUANTUM FIREBALLP AS20.5 A1Y.1500
dqb1.1.1.11.0 DQB1 MATSHITA CR-583 BE30
dva0.0.0.0.0 DVA0
eia0.0.0.2004.0 EIA0 00-08-02-FF-FE-A0
eib0.0.0.2005.0 EIB0 00-08-02-FF-FE-A1
>>>boot dqb1
(boot dqb1.1.1.11.0 -flags a)
block 0 of dqb1.1.1.11.0 is a valid boot block
reading 390 blocks from dqb1.1.1.11.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 30c00
initializing HWRPB at 2000
initializing page table at ffee000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x1000200010115
OSF PAL rev: 0x1000200020117
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root@mithlond.btc.adaptec.com, Thu Jan 16 19:48:37 GMT 2003)
Memory: 262144 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x433770+0x64fd0 syms=[0x8+0x5e548+0x8+0x482da]
/
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xfffffc000033da50...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #0: Fri Jan 17 01:14:51 GMT 2003
root@mithlond.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000c7a000.
Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000c7a0d0.
EB164
Digital AlphaPC 164LX 533 MHz, 531MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x1000200020117
real memory = 266256384 (253 MB)
avail memory = 247005184 (235 MB)
Initializing GEOMetry subsystem
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc000083ef78
cia0: <2117x Core Logic chipset>
cia0: Pyxis, pass 1
cia0: extended capabilities: 1<BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 6.0 on pci0
pci2: <PCI bus> on pcib1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x10000-0x1003f mem 0x82000000-0x820fffff,0x82200000-0x82200fff irq 0 at device 4.0 on pci2
fxp0: interrupting at CIA irq 0
fxp0: Ethernet address 00:08:02:ff:fe:a0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x10040-0x1007f mem 0x82100000-0x821fffff,0x82201000-0x82201fff irq 7 at device 5.0 on pci2
fxp1: interrupting at CIA irq 7
fxp1: Ethernet address 00:08:02:ff:fe:a1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 8.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <CMD 646 ATA controller> port 0x11010-0x1101f irq 5 at device 11.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: interrupting at ISA irq 14
ata1: at 0x170 irq 15 on atapci0
ata1: interrupting at ISA irq 15
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
Timecounter "i8254" frequency 1193182 Hz
Timecounter "alpha" frequency 533187389 Hz
Timecounters tick every 0.976 msec
unexpected machine check:
mces = 0x1
vector = 0x660
param = 0xfffffc0000006068
pc = 0xfffffc0000398b80
ra = 0xfffffc0000398b74
curproc = 0xfffffc0000744e70
pid = 0, comm = swapper
panic: machine check
cpuid = 0;
syncing disks, buffers remaining...
done
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
--------------
With a SCSI controller / Drive connected alongside the IDE CD-ROM, the machine installs/works
fine, albeit a little slow due to the only drive I have to test if with is an old 2gb drive.
---
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030506020242.BD13A63>