Date: Mon, 6 Dec 1999 22:36:46 -0500 (EST) From: Kenneth Culver <culverk@culverk.student.umd.edu> To: Doug White <dwhite@resnet.uoregon.edu> Cc: freebsd-current@FreeBSD.ORG Subject: Re: Sound Blaster ViBRA16X and pcm driver Message-ID: <Pine.BSF.4.20.9912062236230.1360-100000@culverk.student.umd.edu> In-Reply-To: <Pine.BSF.4.21.9912061830360.43415-100000@resnet.uoregon.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Sure.
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Mon Dec 6 17:18:47 EST 1999
culverk@culverk.student.umd.edu:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (451.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
avail memory = 127414272 (124428K bytes)
Preloaded elf kernel "kernel" at 0xc029c000.
Preloaded elf module "bktr.ko" at 0xc029c09c.
Pentium Pro MTRR support enabled
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <VGA-compatible display device> at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 IDE controller> at device 7.1 on pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
ata1 at 0x0170 irq 15 on ata-pci0
pci0: UHCI USB controller (vendor=0x8086, dev=0x7112) at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> at device 7.3 on pci0
pci0: unknown card (vendor=0x121a, dev=0x0002) at 13.0
pci0: unknown card (vendor=0x121a, dev=0x0002) at 15.0
bktr0: <BrookTree 878> irq 5 at device 17.0 on pci0
bktr0: Hauppauge Model 61291 D110
Warning - Unknown Hauppauge Tuner 0xa
Hauppauge WinCast/TV, Philips NTSC tuner, remote control.
pci0: unknown card (vendor=0x109e, dev=0x0878) at 17.1 irq 5
de0: <Digital 21140A Fast Ethernet> irq 10 at device 19.0 on pci0
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:c0:f0:1f:21:02
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus 0
vpo0: EPP 1.9 mode
unknown0: <SupraExpress 56i> at port 0x2f8-0x2ff irq 3 on isa0
unknown1: <Creative ViBRA16X PnP> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 9 drq 0,1 on isa0
unknown2: <Game> at port 0x201 on isa0
ad0: <Maxtor 90845D4/GAS54112> ATA-4 disk at ata0 as master
ad0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad1: <Maxtor 84320D4/NAVX1920> ATA-3 disk at ata0 as slave
ad1: 4120MB (8438850 sectors), 8930 cyls, 15 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, UDMA33
ad2: <FUJITSU MPC3064AT/6020> ATA-3 disk at ata1 as master
ad2: 6187MB (12672450 sectors), 13410 cyls, 15 heads, 63 S/T, 512 B/S
ad2: 16 secs/int, 1 depth queue, UDMA33
acd0: <CD-ROM 40X/AKU/U30> CDROM drive at ata1 as slave
, 128KB buffer, PIO
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data/audio disc loaded, unlocked
da0 at vpo0 bus 0 target 6 lun 0
da0: <IOMEGA ZIP 100 D.09> Removable Direct Access SCSI-2 device
da0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/wd1s1a
WARNING: / was not properly dismounted
de0: enabling 10baseT port
=================================================================
| Kenneth Culver | FreeBSD: The best OS around. |
| Unix Systems Administrator | ICQ #: 24767726 |
| and student at The | AIM: AgRSkaterq |
| The University of Maryland, | Website: (Under Construction) |
| College Park. | http://www.wam.umd.edu/~culverk/|
=================================================================
On Mon, 6 Dec 1999, Doug White wrote:
> On Mon, 6 Dec 1999, Kenneth Culver wrote:
>
> > I have these two lines in my kernel:
> >
> > device pcm0
> > device sbc0
> >
> > and this is the relative part of a dmesg output:
> >
> > unknown0: <SupraExpress 56i> at port 0x2f8-0x2ff irq 3 on isa0
> > unknown1: <Creative ViBRA16X PnP> at port
> > 0x220-0x22f,0x300-0x301,0x388-0x38b ir
> > q 9 drq 0,1 on isa0
> > unknown2: <Game> at port 0x201 on isa0
> >
> > So what exactly do I need to do to get this working?
>
> Can you report the entire dmesg? I suspect this is only one of the
> logical devices.
>
> Doug White | FreeBSD: The Power to Serve
> dwhite@resnet.uoregon.edu | www.FreeBSD.org
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.20.9912062236230.1360-100000>