Date: 12 Dec 1999 08:05:20 EST From: David Bein <bein@pyramid.com> To: freebsd-questions@FreeBSD.ORG Subject: Adaptec/SCSI question ... Message-ID: <945003920/bein@sanity.mass.pyramid.com>
next in thread | raw e-mail | index | archive | help
Hi ...
I am looking into purchasing a second hard drive and as
well some kind of removable media. I am confused about
whether the Adaptec 2940 I have is the same as a product
I see in the stores advertised as "2940U2W" or if what
I have is different. I would also like to know if using
the external SCSI port on the back is a better idea than
running a cable from the inside using the internal cabling.
Any help/advise would be most welcome.
Thank you ...
--David
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.8-RELEASE #0: Sat Jul 17 07:26:50 EDT 1999
bein@sanity.mass.pyramid.com:/usr/src/sys/compile/SANITY
CPU: Pentium II (266.32-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping=4
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 63021056 (61544K bytes)
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=8086 device=7180 subclass=0)> rev 3 on pci0:0:0
chip1 <generic PCI bridge (vendor=8086 device=7181 subclass=4)> rev 3 on pci0:1:0
chip2 <Intel 82371AB PCI-ISA bridge> rev 2 on pci0:7:0
chip3 <Intel 82371AB IDE interface> rev 1 on pci0:7:1
chip4 <Intel 82371AB USB interface> rev 1 int d irq 11 on pci0:7:2
chip5 <Intel 82371AB Power management controller> rev 2 on pci0:7:3
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 5 int a irq 10 on pci0:9:0
fxp0: Ethernet address 08:00:06:0c:39:bd
xl0 <3Com 3c900B Etherlink XL 10BaseT Combo> rev 4 int a irq 10 on pci0:18:0
xl0: Ethernet address: 00:10:5a:09:3f:e9
xl0: selecting BNC port, half duplex
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 1 int a irq 9 on pci0:19:0
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:0:0): "IBM DCAS-34330W S65A" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 4134MB (8467200 512 byte sectors)
Probing for devices on PCI bus 1:
vga0 <VGA-compatible display device> rev 2 int a irq 9 on pci1:0:0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
mse0 not found at 0x23c
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <HITACHI CDR-8430/0024>, removable, accel, dma, iordis
wcd0: 2412/5512KB/sec, 128KB cache, audio play, 255 volume levels, ejectable tray
wcd0: no disc inside, unlocked
bt0 not found at 0x330
uha0 not found at 0x330
aha0 not found at 0x330
aic0 not found at 0x340
nca0 not found at 0x1f88
nca1 not found at 0x350
sea0 not found
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found at 0xffffffff
le0 not found at 0x300
lnc0 not found at 0x280
ze0 not found at 0x300
zp0 not found at 0x300
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?945003920/bein>