Date: Mon, 18 Aug 2008 09:06:46 +0100 From: Oliver Peter <lists@peter.de.com> To: "Daniel O'Connor" <doconnor@gsoft.com.au> Cc: freebsd-stable@freebsd.org Subject: Re: Intel G33 & FreeBSD 7.x Message-ID: <20080818090646.421f7ecd@dilbert.office.centralnic.com> In-Reply-To: <200808181716.36906.doconnor@gsoft.com.au> References: <200808181716.36906.doconnor@gsoft.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 18 Aug 2008 17:16:36 +0930 "Daniel O'Connor" <doconnor@gsoft.com.au> wrote: > Does anyone have a G33 chipset system working in 7.x? I have a working Q35 chipset (which is using the same driver) under latest -STABLE. FreeBSD 7.0-STABLE #0: Sat Aug 16 17:36:46 BST 2008 > I have a 6.3 install here and it isn't working with that so I have > been merging things from HEAD but it still doesn't work. It has been in the source tree since 2007: http://en.wikipedia.org/wiki/Intel_GMA#FreeBSD http://lists.freebsd.org/pipermail/cvs-src/2007-July/080677.html ... and was finally enabled in -STABLE about two weeks ago: http://lists.freebsd.org/pipermail/cvs-src/2008-August/093604.html dmesg[1] is attached. > It would be worth switching to 7.x if it worked there though :) It is worth it anyway! :-) (zfs, zfs, zfs...) Unfortunately, the drm module does not recognize my chipset (so I don't have DRI support under X.ORG) - could be a problem with my hardware. I would like to discuss that later this week on the list with more information. Cheers. [1] Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-STABLE #0: Sat Aug 9 22:33:30 BST 2008 root@delorean.geonosis.homeunix.org:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2407.11-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Logical CPUs per core: 4 usable memory = 4195328000 (4000 MB) avail memory = 4042981376 (3855 MB) ACPI APIC Table: <INTEL DQ3510J > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <INTEL DQ3510J> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x2458-0x245f mem 0xe8200000-0xe827ffff,0xe0000000-0xe7ffffff,0xe8100000-0xe81fffff irq 16 at device 2.0 on pci0 agp0: <Intel Q35 SVGA controller> on vgapci0 agp0: detected 7676k stolen memory agp0: aperture size is 128M pci0: <simple comms> at device 3.0 (no driver attached) atapci0: <Intel ATA controller> port 0x2450-0x2457,0x246c-0x246f,0x2448-0x244f,0x2468-0x246b,0x2420-0x242f irq 18 at device 3.2 on pci0 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] pci0: <simple comms, UART> at device 3.3 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x2400-0x241f mem 0xe8280000-0xe829ffff,0xe82a4000-0xe82a4fff irq 20 at device 25.0 on pci0 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:19:d1:a5:03:a7 uhci0: <UHCI (generic) USB controller> port 0x20e0-0x20ff irq 18 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x20c0-0x20df irq 21 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x20a0-0x20bf irq 17 at device 26.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe82a6c00-0xe82a6fff irq 17 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered pci0: <multimedia> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci4: <ACPI PCI bus> on pcib4 atapci1: <Marvell 88SX6101 UDMA133 controller> port 0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f mem 0xe8000000-0xe80001ff irq 18 at device 0.0 on pci4 atapci1: [ITHREAD] ata4: <ATA channel 0> on atapci1 ata4: [ITHREAD] pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pci6: <ACPI PCI bus> on pcib6 uhci3: <UHCI (generic) USB controller> port 0x2080-0x209f irq 23 at device 29.0 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0x2060-0x207f irq 19 at device 29.1 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered uhci5: <UHCI (generic) USB controller> port 0x2040-0x205f irq 18 at device 29.2 on pci0 uhci5: [GIANT-LOCKED] uhci5: [ITHREAD] usb6: <UHCI (generic) USB controller> on uhci5 usb6: USB revision 1.0 uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 uhub6: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xe82a6800-0xe82a6bff irq 23 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb4 usb5 usb6 usb7: <EHCI (generic) USB 2.0 controller> on ehci1 usb7: USB revision 2.0 uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 uhub7: 6 ports with 6 removable, self powered pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci7: <ACPI PCI bus> on pcib7 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci2: <Intel ICH8 SATA300 controller> port 0x2438-0x243f,0x2464-0x2467,0x2430-0x2437,0x2460-0x2463,0x2020-0x203f mem 0xe82a6000-0xe82a67ff irq 21 at device 31.2 on pci0 atapci2: [ITHREAD] atapci2: AHCI called from vendor specific driver atapci2: AHCI Version 01.20 controller with 6 ports detected ata5: <ATA channel 0> on atapci2 ata5: [ITHREAD] ata6: <ATA channel 1> on atapci2 ata6: [ITHREAD] ata7: <ATA channel 2> on atapci2 ata7: [ITHREAD] ata8: <ATA channel 3> on atapci2 ata8: [ITHREAD] ata9: <ATA channel 4> on atapci2 ata9: [ITHREAD] ata10: <ATA channel 5> on atapci2 ata10: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est2 attach returned 6 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 acpi_button0: <Sleep Button> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f0 irq 6 drq 2 on acpi0 fdc0: [FILTER] sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] cryptosoft0: <software crypto> on motherboard atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), class 0/0, rev 1.10/3.00, addr 2> on uhub5 ums0: 3 buttons and Z dir. ukbd0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on uhub6 kbd2 at ukbd0 uhid0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on uhub6 WARNING: ZFS is considered to be an experimental feature in FreeBSD. Timecounters tick every 1.000 msec ZFS filesystem version 6 ZFS storage pool version 6 ad12: 381554MB <Hitachi HDT725040VLA360 V5COA7EA> at ata6-master SATA300 ad20: 381554MB <Hitachi HDT725040VLA360 V5COA7EA> at ata10-master SATA300 ar0: 381551MB <Intel MatrixRAID RAID1> status: READY ar0: disk0 READY (master) using ad12 at ata6-master ar0: disk1 READY (mirror) using ad20 at ata10-master SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Trying to mount root from zfs:tank -- Oliver PETER, email: oliver@peter.de.com, ICQ# 113969174 "I like to con people. And I like to insult people. If you combine con & insult, you get consult!" -- Dogbert
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080818090646.421f7ecd>