Date: Fri, 9 Mar 2007 22:21:54 -0800 (PST) From: mjacob@freebsd.org To: Mike Tancsa <mike@sentex.net> Cc: freebsd-hardware@freebsd.org Subject: Re: MPT SAS1064 Message-ID: <20070309221943.I64099@ns1.feral.com> In-Reply-To: <200703091820.l29IKuwT001782@lava.sentex.ca> References: <200703091820.l29IKuwT001782@lava.sentex.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
Haven't a clue- this doesn't appear to be the embedded mirroring adapter- which is good because you're lucky if it works at all for you. What's the actual underlying device? > > Hi, > > One of our suppliers sent us an MPT adaptor (SAS1064? screen capture below) > to evaluate. Seems like a fairly decent adaptor speed / feature wise, but I > cant seem to figure out a way to monitor the status of the array ? Is there > a way to do so from RELENG_6 ? > > ---Mike > > > | LSI Logic MPT Setup Utility v6.04.00.00 (2005.08.29) > | > | Adapter List Global Properties > | > | Adapter PCI PCI PCI PCI FW Revision Status Boot > | > | Bus Dev Fnc Slot Order | > | SAS1064 03 01 00 02 1.06.00.00-IR Enabled 0 > | > > [tyan-1u]% dmesg | grep mpt > mpt0: <LSILogic SAS/SATA Adapter> port 0xd800-0xd8ff mem > 0xdfefc000-0xdfefffff,0xdfee0000-0xdfeeffff irq 48 at device 1.0 on pci3 > mpt0: [GIANT-LOCKED] > mpt0: MPI Version=1.5.10.0 > mpt0: mpt_cam_event: 0xb > mpt0: Unhandled Event Notify Frame. Event 0xb (ACK not required). > da0 at mpt0 bus 0 target 8 lun 0 > [tyan-1u]% dmesg | grep da0 > da0 at mpt0 bus 0 target 8 lun 0 > da0: <LSILOGIC Logical Volume 3000> Fixed Direct Access SCSI-2 device > da0: 300.000MB/s transfers, Tagged Queueing Enabled > da0: 75340MB (154296320 512 byte sectors: 255H 63S/T 9604C) > [tyan-1u]% > > mpt0@pci3:1:0: class=0x010000 card=0x30201000 chip=0x00501000 rev=0x02 > hdr=0x00 > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > class = mass storage > subclass = SCSI > cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0 > cap 05[98] = MSI supports 1 message, 64 bit > cap 07[68] = PCI-X 64-bit supports 133MHz, 2048 burst read, 16 split > transactions > cap 11[b0] = MSI-X supports 1 message in map 0x14 > > > -------------------------------------------------------------------- > Mike Tancsa, tel +1 519 651 3400 > Sentex Communications, mike@sentex.net > Providing Internet since 1994 www.sentex.net > Cambridge, Ontario Canada www.sentex.net/mike > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070309221943.I64099>