Date: Sun, 29 Dec 2002 12:11:09 -0800 From: Arun Sharma <arun@sharma-home.net> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/46619: Installation hangs on IBM Thinkpad T23 Message-ID: <20021229201109.GA6516@sharma-home.net>
next in thread | raw e-mail | index | archive | help
>Number: 46619
>Category: kern
>Synopsis: Installation hangs on IBM Thinkpad T23
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Dec 29 12:20:01 PST 2002
>Closed-Date:
>Last-Modified:
>Originator: Arun Sharma
>Release: FreeBSD 5.0-RC1 i386
>Organization:
>Environment:
System: FreeBSD adsharma-mob3 5.0-DP1 FreeBSD 5.0-DP1 #0: Sun Apr 7 02:51:42 GMT 2002 murray@builder.freebsdmall.com:/usr/src/sys/i386/compile/GENERIC i386
This system works with 5.0-DP1, but DP2 and RC1 both hang during
the installation. I've done "unset acpi_load", so ACPI no longer
seems to be an issue.
Specifically, the installation hangs just before the line starting with orm0.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-DP1 #0: Sun Apr 7 02:51:42 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/i386/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0504000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 732714238 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (732.71-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 401997824 (392576K bytes)
avail memory = 385380352 (376348K bytes)
Pentium Pro MTRR support enabled
Using $PIR table, 14 entries at 0xc00fdeb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: (New UHCI DeviceId=0x24878086)
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: (0x24878086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pcic0: <TI PCI-1420 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2
pcic0: Could not map register memory
device_probe_and_attach: pcic0 attach returned 12
pcic0: <TI PCI-1420 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 5 at device 0.1 on pci2
pcic0: Could not map register memory
device_probe_and_attach: pcic0 attach returned 12
pci2: <simple comms> at device 2.0 (no driver attached)
fxp0: <Intel Pro/100 Ethernet> port 0x6400-0x643f mem 0xc0200000-0xc0200fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:d0:59:bf:f0:4a
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
---> hangs here <----
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xcf000-0xcffff,0xce000-0xcefff,0xc0000-0xcdfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0: <Intel i82365SL-DF> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus (classic)> on pcic0
pccard1: <PC Card bus (classic)> on pcic0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> can't assign resources (port)
unknown: <IBM3780> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: 28615MB <IC25N030ATCS04-0> [62016/15/63] at ata0-master UDMA100
acd0: DVD-ROM <HL-DT-STDVD-ROM GDR8081N> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s3a
fd0: autoselection failed
>Description:
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021229201109.GA6516>