Date: Fri, 5 Jan 2001 16:25:56 +0200 From: Vallo Kallaste <vallo@matti.ee> To: freebsd-current@freebsd.org Cc: gibbs@freebsd.org, msmith@freebsd.org Subject: Lost second channel of AIC-7896 Message-ID: <20010105162556.A454@myhakas.matti.ee>
next in thread | raw e-mail | index | archive | help
After upgrading my system from 13'th December to latest -current,
the ahc driver doesn't attach to onboard AIC-7896 second channel
anymore. I'm cc'g to Mr. Gibbs and Smith in hope they are the right
persons.
Dmesg:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Jan 5 15:42:56 EET 2001
root@myhakas.matti.ee:/usr/src/sys/compile/Myhakas.SMP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x672 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268435456 (262144K bytes)
avail memory = 257298432 (251268K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03c5000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03c509c.
Pentium Pro MTRR support enabled
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc00c6954 (c0006954)
VESA: Matrox Graphics Inc.
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443GX host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga_pci0: <VGA-compatible display device> mem 0xfd800000-0xfdffffff,0xfe2fc000-0xfe2fffff,0xf2000000-0xf3ffffff irq 16 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at 7.2 (no driver attached)
Timecounter "PIIX" frequency 3579545 Hz
pci0: <bridge, PCI-unknown> at 7.3 (no driver attached)
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xe400-0xe4ff mem 0xfebfc000-0xfebfcfff irq 16 at device 11.0 on pci0
aic7896/97: Wide Channel A, SCSI Id=7, 32/255 SCBs
pci0: <mass storage, SCSI> at 11.1 (no driver attached)
pcm0: <AudioPCI ES1371> port 0xed80-0xedbf irq 18 at device 12.0 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xee80-0xeebf mem 0xfe800000-0xfe8fffff,0xfebfd000-0xfebfdfff irq 19 at device 13.0 on pci0
fxp0: Ethernet address 00:e0:81:10:50:32
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xef00-0xef3f mem 0xfea00000-0xfeafffff,0xfebfe000-0xfebfefff irq 17 at device 15.0 on pci0
fxp1: Ethernet address 00:90:27:54:57:26
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xef80-0xef9f irq 18 at device 18.0 on pci0
ed0: address 00:e0:29:6d:14:19, type NE2000 (16 bit)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <9 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0f13> can't assign resources
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
BRIDGE 990810, have 4 interfaces
-- index 1 type 6 phy 0 addrl 6 addr 00.e0.81.10.50.32
-- index 2 type 6 phy 0 addrl 6 addr 00.90.27.54.57.26
-- index 3 type 6 phy 0 addrl 6 addr 00.e0.29.6d.14.19
ad0: 14649MB <IBM-DTLA-307015> [29765/16/63] at ata0-master tagged UDMA33
ad1: 35772MB <IBM-DPTA-353750> [72680/16/63] at ata1-master tagged UDMA33
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 1 lun 0
da0: <QUANTUM VIKING II 4.5WSE 5520> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C)
da1 at ahc0 bus 0 target 2 lun 0
da1: <QUANTUM VIKING II 4.5WSE 5520> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da1: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C)
SMP: AP CPU #1 Launched!
>> now fxp0 promisc ON if_flags 0xffff8943 bdg_flags 0x5
>> now fxp1 promisc ON if_flags 0xffff8943 bdg_flags 0x5
>> now ed0 promisc ON if_flags 0xffff8943 bdg_flags 0x5
Pciconf:
hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71a08086 rev=0x00 hdr=0x00
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71a18086 rev=0x00 hdr=0x01
isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
none0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
none1@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
ahc0@pci0:11:0: class=0x010000 card=0x080f9005 chip=0x005f9005 rev=0x00 hdr=0x00
none2@pci0:11:1: class=0x010000 card=0x080f9005 chip=0x005f9005 rev=0x00 hdr=0x00
pcm0@pci0:12:0: class=0x040100 card=0x13711274 chip=0x13711274 rev=0x06 hdr=0x00
fxp0@pci0:13:0: class=0x020000 card=0x000c8086 chip=0x12298086 rev=0x08 hdr=0x00
fxp1@pci0:15:0: class=0x020000 card=0x000c8086 chip=0x12298086 rev=0x08 hdr=0x00
ed0@pci0:18:0: class=0x020000 card=0x201110b8 chip=0x802910ec rev=0x00 hdr=0x00
vga_pci0@pci1:0:0: class=0x030000 card=0x19f8102b chip=0x0525102b rev=0x03 hdr=0x00
--
Vallo Kallaste
vallo@matti.ee
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010105162556.A454>