Date: Tue, 10 Oct 2000 08:44:15 -0400 (EDT) From: Valentin Chopov <valentin@valcho.net> To: freebsd-current@freebsd.org Subject: after errors in SCSI (Adaptec 29160), 5.0 freezes Message-ID: <Pine.BSF.4.21.0010100828250.19697-100000@valcho.net>
next in thread | raw e-mail | index | archive | help
System is freezes, no panic, no reboot, need cold reset to restart...
Thanks,
Val
This is from /var/log/messages :
Oct 10 00:10:11 squid /boot/kernel/kernel: (da2:ahc0:0:2:0): Invalidating
pack
Oct 10 00:10:44 squid last message repeated 10 times
Oct 10 00:11:03 squid last message repeated 6 times
Oct 10 00:11:07 squid /boot/kernel/kernel: (da2:ahc0:0:2:0): SCB 0x60 -
timed out while idle, SEQADDR == 0x3
Oct 10 00:11:07 squid /boot/kernel/kernel: sg[0] - Addr 0x2af1d000
: Length 4096
Oct 10 00:11:07 squid /boot/kernel/kernel: sg[1] - Addr 0x1c85e000
: Length 2048
Oct 10 00:11:07 squid /boot/kernel/kernel: (da2:ahc0:0:2:0): SCB
96: Immediate reset. Flags = 0x4040
Oct 10 00:11:07 squid /boot/kernel/kernel: (da2:ahc0:0:2:0): no longer in
timeout, status = 34b
Oct 10 00:11:07 squid /boot/kernel/kernel: ahc0: Issued Channel A Bus
Reset. 32 SCBs aborted
--------
dmesg:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Mon Oct 9 16:29:43 EDT 2000
valentin@squid.seidata.com:/usr/src/sys/compile/SQUID
Timecounter "i8254" frequency 1193072 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (733.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 805240832 (786368K bytes)
config> di pcic0
No such device: pcic0
Invalid command or syntax. Type `?' for help.
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di le0
No such device: le0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 779165696 (760904K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 12
IOAPIC #0 intpin 17 -> irq 10
IOAPIC #0 intpin 18 -> irq 11
IOAPIC #0 intpin 19 -> irq 15
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc02c2000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02c209c.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP/82C694X (Apollo MVP3/Pro133A) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Trident model 9750 VGA-compatible display device> at 0.0 irq 12
isab0: <VIA 82C596 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 ATA66 controller> port 0xd000-0xd00f at device 7.1 on pci0
atapci0: Busmastering DMA enabled
ata0: at 0x1f0 irq 14 on atapci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd800-0xd81f mem 0xd7000000-0xd70fffff,0xd7201000-0xd7201fff irq 10 at device 17.0 on pci0
fxp0: Ethernet address 00:90:27:12:fa:89
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xdc00-0xdc1f mem 0xd7100000-0xd71fffff,0xd7200000-0xd7200fff irq 11 at device 18.0 on pci0
fxp1: Ethernet address 00:90:27:12:e0:85
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xe000-0xe0ff mem 0xd7202000-0xd7202fff irq 15 at device 19.0 on pci0
aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
isa_dmainit(2, 1024) failed
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
unknown: <PNP0303> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
IP Filter: v3.4.9 initialized. Default = pass all, Logging = disabled
ad0: 6180MB <Maxtor 86480D6> [13395/15/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318404LW 0002> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <SEAGATE ST318404LW 0002> Fixed Direct Access SCSI-3 device
da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da2: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST318404LW 0002> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
WARNING: / was not properly dismounted
SMP: AP CPU #1 Launched!
icmp-response bandwidth limit 275/200 pps
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0010100828250.19697-100000>