Date: Fri, 15 Oct 2004 14:29:43 +0200 From: rejden <rejden@hysteria.sk> To: freebsd-smp@freebsd.org Cc: freebsd-current@freebsd.org Subject: smp problem with 8 CPU's Message-ID: <20041015122943.GA29434@hysteria.sk>
next in thread | raw e-mail | index | archive | help
Hi,
i cannot get working smp on compaq proliant dl760 with 8cpu's xeon 700mhz
southpole# uname -a
FreeBSD southpole.brc.cpqcorp.net 5.3-BETA7 FreeBSD 5.3-BETA7 #0: Fri Jan 31 05:24:02 CET 2003 root@southpole.brc.cpqcorp.net:/usr/obj/usr/src/sys/SOUTHPOLE i386
southpole# dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA7 #0: Fri Jan 31 05:24:02 CET 2003
root@southpole.brc.cpqcorp.net:/usr/obj/usr/src/sys/SOUTHPOLE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III Xeon (700.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6a4 Stepping = 4
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2147450880 (2047 MB)
avail memory = 2095992832 (1998 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ DL760___> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 3.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <memory> at device 3.1 (no driver attached)
pci0: <base peripheral> at device 11.0 (no driver attached)
pci0: <base peripheral> at device 12.0 (no driver attached)
ida0: <Compaq Integrated Array controller> port 0x2400-0x24ff mem 0xf5000000-0xf5ffffff,0xf6000000-0xf6ffffff irq 11 at device 14.0 on pci0
ida0: [GIANT-LOCKED]
ida0: drives=3 firm_rev=1.50
idad0: <Compaq Logical Drive> on ida0
idad0: 17359MB (35553120 sectors), blocksize=512
idad1: <Compaq Logical Drive> on ida0
idad1: 69459MB (142253280 sectors), blocksize=512
idad2: <Compaq Logical Drive> on ida0
idad2: 69459MB (142253280 sectors), blocksize=512
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory, RAM> at device 20.0 (no driver attached)
pci0: <memory, RAM> at device 20.1 (no driver attached)
pcib2: <ACPI Host-PCI bridge> on acpi0
pci5: <ACPI PCI bus> on pcib2
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x4000-0x407f mem 0xf7ef0000-0xf7ef007f irq 15 at device 1.0 on pci5
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:76:a4:e5:fa
pci5: <base peripheral> at device 11.0 (no driver attached)
pcib3: <ACPI Host-PCI bridge> on acpi0
pci13: <ACPI PCI bus> on pcib3
pci13: <base peripheral> at device 11.0 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0 port 0x778-0x77d,0x378-0x37f irq 7 drq 0 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROMs> at iomem 0xee000-0xeffff,0xe8000-0xebfff,0xcc000-0xcc7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 700011346 Hz quality 800
Timecounters tick every 10.000 msec
IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to accept, logging unlimited
acd0: CDROM <COMPAQ CD-ROM SN-124Q/QA17> at ata0-master PIO4
Mounting root from ufs:/dev/idad0s1a
southpole#
southpole# mptable
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f4fd0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x00
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000fadc7
signature: 'PCMP'
base table length: 780
version: 1.4
checksum: 0x73
OEM ID: 'Compaq '
Product ID: 'ProLiant '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 80
local APIC address: 0xfee00000
extended table length: 172
extended table checksum: 100
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
7 0x10 BSP, usable 6 10 4 0x387fbff
0 0x10 AP, usable 6 10 4 0x387fbff
1 0x10 AP, usable 6 10 4 0x387fbff
2 0x10 AP, usable 6 10 4 0x387fbff
3 0x10 AP, usable 6 10 4 0x387fbff
4 0x10 AP, usable 6 10 4 0x387fbff
5 0x10 AP, usable 6 10 4 0x387fbff
6 0x10 AP, usable 6 10 4 0x387fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
17 ISA
--
I/O APICs: APIC ID Version State Address
8 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
INT active-lo level 0 14:A 8 24
INT active-lo level 0 14:B 8 24
INT active-lo level 1 1:A 8 20
INT active-lo level 1 1:C 8 20
INT active-lo level 1 1:B 8 20
INT active-lo level 1 1:D 8 20
INT active-lo level 1 2:A 8 19
INT active-lo level 1 2:B 8 19
INT active-lo level 1 2:C 8 19
INT active-lo level 1 2:D 8 19
INT active-lo level 1 3:A 8 18
INT active-lo level 1 3:C 8 18
INT active-lo level 1 3:B 8 18
INT active-lo level 1 3:D 8 18
INT active-lo level 1 4:A 8 17
INT active-lo level 1 4:C 8 17
INT active-lo level 1 4:B 8 17
INT active-lo level 1 4:D 8 17
INT active-lo level 1 5:A 8 16
INT active-lo level 1 5:C 8 16
INT active-lo level 1 5:B 8 16
INT active-lo level 1 5:D 8 16
INT active-lo level 1 6:A 8 31
INT active-lo level 1 6:C 8 31
INT active-lo level 1 6:B 8 31
INT active-lo level 1 6:D 8 31
INT active-lo level 0 1:A 8 23
INT active-lo level 0 1:C 8 23
INT active-lo level 0 1:B 8 23
INT active-lo level 0 1:D 8 23
INT active-lo level 0 2:A 8 22
INT active-lo level 0 2:C 8 22
INT active-lo level 0 2:B 8 22
INT active-lo level 0 2:D 8 22
INT active-lo level 0 3:A 8 21
INT active-lo level 0 3:C 8 21
INT active-lo level 0 3:B 8 21
INT active-lo level 0 3:D 8 21
INT active-lo level 2 1:A 8 30
INT active-lo level 2 1:C 8 30
INT active-lo level 2 1:B 8 29
INT active-lo level 2 1:D 8 29
INT active-lo level 2 2:A 8 28
INT active-lo level 2 2:C 8 28
INT active-lo level 2 2:B 8 28
INT active-lo level 2 2:D 8 28
INT active-lo level 0 11:A 8 26
INT active-lo level 1 11:A 8 26
INT active-lo level 2 11:A 8 26
INT active-hi edge 17 1 8 1
INT active-hi edge 17 0 8 2
INT active-hi edge 17 3 8 3
INT active-hi edge 17 4 8 4
INT active-hi edge 17 5 8 5
INT active-hi edge 17 6 8 6
INT active-hi edge 17 7 8 7
INT active-hi edge 17 8 8 8
INT active-lo level 17 9 8 9
INT active-hi edge 17 10 8 10
INT active-hi edge 17 11 8 11
INT active-hi edge 17 12 8 12
INT active-lo level 17 13 8 13
INT active-hi edge 17 14 8 14
INT active-hi edge 17 15 8 15
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT conforms conforms 17 0 255 0
NMI conforms conforms 17 0 255 1
--
MPTABLE OUT OF ORDER!
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT conforms conforms 17 0 8 0
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x4000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0x80000000
address range: 0x77e00000
--
System Address Space
bus ID: 5 address type: I/O address
address base: 0x4000
address range: 0x1000
--
System Address Space
bus ID: 5 address type: memory address
address base: 0xf7e00000
address range: 0x100000
--
System Address Space
bus ID: 13 address type: I/O address
address base: 0x0
address range: 0x0
--
System Address Space
bus ID: 13 address type: memory address
address base: 0xf7f00000
address range: 0x6d00000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x60000
--
Bus Heirarchy
bus ID: 17 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 5 address modifier: subtract
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 13 address modifier: subtract
predefined range: 0x00000000
===============================================================================
southpole#
thanks
rejden
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041015122943.GA29434>