Date: Mon, 26 Sep 2016 22:15:06 +0200 From: "O. Hartmann" <ohartman@zedat.fu-berlin.de> To: "freebsd-embedded@freebsd.org" <embedded@freebsd.org> Subject: Re: CURRENT: PCengines APU2C4 SanDisk UltraFit USB 3.0 32G failure: error 19 Message-ID: <20160926221506.21a6c247.ohartman@zedat.fu-berlin.de> In-Reply-To: <20160917012949.64df9887.ohartman@zedat.fu-berlin.de> References: <20160917012949.64df9887.ohartman@zedat.fu-berlin.de>
index | next in thread | previous in thread | raw e-mail
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Am Sat, 17 Sep 2016 01:29:49 +0200 "O. Hartmann" <ohartman@zedat.fu-berlin.de> schrieb: > Trying to use a SanDisk 32GB UltraFit USB 3.0 Flash drive as boot device with a PCengine > APU2C4, booting recent CURRENT (r305893) fails with error 19: > > [...] > ugen1.2: <vendor 0x0438> at usbus1 > uhub2 on uhub1 > uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1 > ugen0.2: <SanDisk> at usbus0 > umass0 on uhub0 > umass0: <SanDisk Ultra Fit, class 0/0, rev 2.10/1.00, addr 1> on usbus0 > umass0: SCSI over Bulk-Only; quirks = 0xc100 > umass0:2:0: Attached to scbus2 > uhub2: 4 ports with 4 removable, self powered > mountroot: waiting for device /dev/ufs/Rs1a... > Mounting from ufs:/dev/ufs/Rs1a failed with error 19. > > The very same NanoBSD image put to SD or USB 2.0 flash drive does boot! > > I tried tinyLinux with the same flash drive and it worked. > > Are there any hints how to make this flash drive work? > > Kind regards, > > oh Plugging in the USB 3 flash drive, I get this message on the console, maybe it tells somebody enlightened more than me ...: [...] umass0 on uhub0 umass0: <SanDisk Ultra Fit, class 0/0, rev 3.00/1.00, addr 1> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0xc100 umass0:2:0: Attached to scbus2 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: <SanDisk Ultra Fit 1.00> Removable Direct Access SPC-4 SCSI device da0: Serial Number 4C530001010504121064 da0: 400.000MB/s transfers da0: 29327MB (60062500 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> Steering write from 0 kBps to 300000 kBps -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQEcBAEBCAAGBQJX6YHKAAoJEOgBcD7A/5N8OWAIAK6ENbrwiCx+ui4yq2TvRiqe acQjf78NlFeNJV4mSx7iwIai7L/4HItW72sKWd0DZna0Rr/pXrFpIEKWWheTyObv y8mEsx2DLzhICrI5Dmz3A5exkrIGS3ipyuNKrYY/N2/YPWKQMQmaa88N4JgiS0q3 ImeavTek+ArcEocmEanC/mc/I1SYeW1gSiesY8JRPCWX/UG8U+59qTtmlvqCyK/F kPoN76hSrSGdKQmxA0gsnWw/udEk1xhTq2Xazw9mCAdx1FnIBf9DKqaI4MasK2iS 7co+wAd6JkKkDzbqWd45/FZ3Ulu20vmNbx2tACnWsgma4RXdkS7iqDUTkcYdR2o= =+yek -----END PGP SIGNATURE-----help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20160926221506.21a6c247.ohartman>