Date: Thu, 13 Jul 2017 00:23:06 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-bugs@FreeBSD.org Subject: [Bug 219399] System panics after several hours of 14-threads-compilation orgies using poudriere on AMD Ryzen... Message-ID: <bug-219399-8-SXrQTGEw69@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-219399-8@https.bugs.freebsd.org/bugzilla/> References: <bug-219399-8@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D219399 Don Lewis <truckman@FreeBSD.org> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |truckman@FreeBSD.org --- Comment #56 from Don Lewis <truckman@FreeBSD.org> --- I'm seeing similar problems here. Ryzen 1700X Gigabyte AX370-Gaming 5 64GB Crucial DDR-2400 ECC RAM (from Gigabyte QVL) Seasonic 650W Prime Titanium PSU NVIDIA GT21x video card (VESA text mode only for the console, no X11, and no nvidia driver). I originally started with a Gigabyte AB350-Gaming motherboard but swapped it out due to high VRM temps and lack of ECC RAM support. Both boards ran four passes of memtest86 and overnight prime95 runs w/o error. Thee first board= had the original BIOS that didn't know about the 20C Tctl offset, so it always ran = its fans very fast. The F5 BIOS that I installed on the X370 board had the AGE= SA 1004a update and knew about the Tctl offset. I've been seeing idle temps in the BIOS of about 35C on it. Both boards either randomly lock up (blank console) or silently reboot (no panic messages in /var/log/messages and no crash dumps), along with some ot= her errors while building ports with poudriere. I was getting a bunch of the "unable to rename temporary" errors while running an older version of FreeB= SD 12.0 (r320316?), but haven't seen that since upgrading to r320570. Things I've tried since upgrading to the new motherboard: Set fan speed at max Core performance boost -> off SMT -> off RAM 2400MHZ-> 1866 MHz CPU 3.4GHz -> 3.0GHz Disable 4 cores (auto -> 2+2) - Seems to run 2x longer at half throughput before rebooting (which happened very early in the morning when the room temp was at its lowest). Exhaust air was very cool. Dragonfly patch I just upgraded to the latest (F6) BIOS which has AGESA 1006. I should have some results in a few hours, but at this point, I'm not optimistic. In the meantime, my AMD FX-8320E is rock solid under the same sort of load,= but just takes too long to build all the packages sets that I use. --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-219399-8-SXrQTGEw69>