Date: Sat, 13 May 2000 05:30:11 -0500 (CDT) From: Alex Charalabidis <alex@wnm.net> To: Doug Young <dougy@gargoyle.apana.org.au> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: modem / cuaa1 / ppp weirdness Message-ID: <Pine.BSI.4.05.10005130521170.13139-100000@earth.wnm.net> In-Reply-To: <00bd01bfbc95$6ae14380$847e03cb@ROADRUNNER>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 13 May 2000, Doug Young wrote: > I'm attempting to setup two ISA internal modems in a 486dx2-66 running > FreeBSD 4.0. The reason for internal ones is that the box was needed > urgently > (its a permanently connected internet gateway) and the bits lurking around > didn't > include a multi I/O card with 16550 UARTS. The internet modem has been > running well on cuaa0 for weeks, but I need to get the second modem on cuaa1 > configured so it can connect the first LAN to a Win2000 / Win9x LAN a few > suburbs away. The motherboard is ISA / VESA, so there's no onboard COM ports > to cause conflicts, and both modems have jumper IRQ configuration. > > I checked the kernel configuration file for tun & ppp devices, there are two > of each so I figure that won't need any modification. > > (1) Despite the first modem working well, the output of dmesg looks weird to > me. > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1: configured irq3 not in bitmap of probed irqs 0 > sio1 at port 0x2f8-0x2ff irq3 on isa0 > sio1: type 16550A > ... That's likely to happen if the hardware device is not configured to use irq 3. Are you sure you've set the jumpers to use irq 3? -ac -- ============================================================== Alex Charalabidis (AC8139) 5050 Poplar Ave, Ste 170 Systems Administrator Memphis, TN 38157 WebNet Memphis (901) 432 6000 Author, The Book of IRC http://www.bookofirc.com/ ============================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.4.05.10005130521170.13139-100000>