Date: Fri, 8 Dec 2006 17:25:31 -0600 From: Jose <joseche@gmail.com> To: freebsd-drivers@freebsd.org, "Attilio Rao" <attilio@freebsd.org> Subject: Driver wpi causes kernel error messages Message-ID: <82ee4d9a0612081525y625b580dt2869fd238a0cb2e4@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
I submitted the error to 'ports' http://www.freebsd.org/cgi/query-pr.cgi?pr=106501 but here you have the information: when I do the kldload if_wpi I get: pci12: driver added found-> vendor=0x8086, dev=0x4222, revid=0x02 bus=12, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci12:0:0: reprobing on driver added wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xefdff000-0xefdfffff irq 17 at device 0.0 on pci12 wpi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xefdff000 channel 1 pwr1 0x0087 pwr2 0x0087 channel 2 pwr1 0x0088 pwr2 0x0087 channel 3 pwr1 0x006f pwr2 0x006e channel 4 pwr1 0x006f pwr2 0x0070 channel 5 pwr1 0x0000 pwr2 0x0000 channel 6 pwr1 0x007a pwr2 0x007a channel 7 pwr1 0x007c pwr2 0x007c channel 8 pwr1 0x007f pwr2 0x007e channel 9 pwr1 0x0080 pwr2 0x0080 channel 10 pwr1 0x0000 pwr2 0x0000 channel 11 pwr1 0x0000 pwr2 0x0000 channel 12 pwr1 0x0000 pwr2 0x0000 channel 13 pwr1 0x0000 pwr2 0x0000 channel 14 pwr1 0x0000 pwr2 0x0000 wpi0: bpf attached wpi0: Ethernet address: 00:13:02:9f:10:ba wpi0: bpf attached wpi0: bpf attached wpi0: [MPSAFE] wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps pci13: driver added kldload wpi_ucode: wpi_ucode loads silently and without problems 5 1 0xc6a45000 1d000 wpi_ucode.ko After that when I do ifconfig wpi0 up: setting h/w config 1200 microcode alive notification version 10d00 alive 1 temperature -203 scan finished scan finished scan finished rx tail flags error 702 scan finished scan finished scan finished rx tail flags error 702 rx tail flags error 702 scan finished scan finished scan finished
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?82ee4d9a0612081525y625b580dt2869fd238a0cb2e4>