Date: Sun, 22 Jun 2003 17:30:27 +0800 From: wsk <wsk@mail.gddsn.org.cn> To: freebsd-mobile@freebsd.org Cc: wsk@mail.gddsn.org.cn Subject: Re: thinkpad t30 console support 800x600 resolution? Message-ID: <200306220853370342.0930E0BD@smtp.myrealbox.com> References: <3EF27453.1000704@mail.gddsn.org.cn> <200306191949300757.0AE6C96A@smtp.myrealbox.com> <3EF2A580.4010407@mail.gddsn.org.cn> <200306192354240048.0BC6FB63@smtp.myrealbox.com> <3EF2D6FC.9080504@mail.gddsn.org.cn> <200306200725050888.0D639B29@smtp.myrealbox.com> <000d01c338a0$ea7980a0$f9a8a8c0@dg>
next in thread | previous in thread | raw e-mail | index | archive | help
Suken,
I have redirected your message to the list because I don't have further
answers. I can't tell you why a module would fail to load.
Maybe someone with a T30 can report if VESA mode works for them in 4.8.
Greg
-----Original Message-----
Greg:
yup!get the VESA with boot -v!
it said
"VESA: 0 mode(s) found
module_register_init: MOD_LOAD (vesa, c02e4758, 0) error 6"
and what can i do now? TIA!
--wsk
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Sat Jun 21 14:22:19 CST 2003
root@lp.gddsn.org.cn:/usr/obj/usr/src/sys/LP
Calibrating clock(s) ... TSC clock: 1198954488 Hz, i8254 clock: 1193154
Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz (1198.99-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC
A,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 1073152000 (1048000K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0043e000 - 0x3ff67fff, 1068670976 bytes (260906 pages)
avail memory = 1040388096 (1016004K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6fe0
bios32: Entry = 0xfd7e0 (c00fd7e0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x18e
pnpbios: Found PnP BIOS data at 0xc00f7040
pnpbios: Entry = f0000:9d54 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
ACPI: 000f7010
Preloaded elf kernel "kernel" at 0xc0417000.
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00
00 01 ff 00 00 01 19 01 00 01 2f 01 00 01 34 01
00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01
94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01
VESA: 0 mode(s) found
module_register_init: MOD_LOAD (vesa, c02e4758, 0) error 6
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086)
Using $PIR table, 14 entries at 0xc00fdeb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82845 Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x1a30, revid=0x04
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e0000000, size 26
found-> vendor=0x8086, dev=0x1a31, revid=0x04
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x2482, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[20]: type 1, range 32, base 00001800, size 5
found-> vendor=0x8086, dev=0x2484, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[20]: type 1, range 32, base 00001820, size 5
found-> vendor=0x8086, dev=0x2487, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=c, irq=11
map[20]: type 1, range 32, base 00001840, size 5
found-> vendor=0x8086, dev=0x2448, revid=0x42
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=8 secondarybus=2
found-> vendor=0x8086, dev=0x248c, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x248a, revid=0x02
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base 000001f0, size 3
map[14]: type 1, range 32, base 000003f4, size 2
map[18]: type 1, range 32, base 00000170, size 3
map[1c]: type 1, range 32, base 00000374, size 2
map[20]: type 1, range 32, base 00001860, size 4
found-> vendor=0x8086, dev=0x2483, revid=0x02
class=0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[20]: type 1, range 32, base 00001880, size 5
found-> vendor=0x8086, dev=0x2485, revid=0x02
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[10]: type 1, range 32, base 00001c00, size 8
map[14]: type 1, range 32, base 000018c0, size 6
found-> vendor=0x8086, dev=0x2486, revid=0x02
class=07-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[10]: type 1, range 32, base 00002400, size 8
map[14]: type 1, range 32, base 00002000, size 7
pci0: <PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at
device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x1002, dev=0x4c57, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base e8000000, size 27
map[14]: type 1, range 32, base 00003000, size 8
map[18]: type 1, range 32, base d0100000, size 16
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c57 graphics accelerator> (vendor=0x1002, dev=0x4c57)
at 0.0 irq 11
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port
0x1800-0x181f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port
0x1820-0x183f irq 11 at device 29.1 on pci0
using shared irq11.
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port
0x1840-0x185f irq 11 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on
pci0
found-> vendor=0x104c, dev=0xac55, revid=0x01
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=5 secondarybus=3
intpin=a, irq=11
map[10]: type 1, range 32, base 50000000, size 12
found-> vendor=0x104c, dev=0xac55, revid=0x01
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=8 secondarybus=6
intpin=b, irq=11
map[10]: type 1, range 32, base 51000000, size 12
found-> vendor=0x8086, dev=0x1031, revid=0x42
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base d0200000, size 12
map[14]: type 1, range 32, base 00008000, size 6
pci2: <PCI bus> on pcib2
pcic0: <TI PCI-1520 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq
11 at device 0.0 on pci2
pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa
irq]
pcic0: PCI Configuration space:
0x00: 0xac55104c 0x02100107 0x06070001 0x00824008
0x10: 0x50000000 0x020000a0 0xb0050302 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x0760010b
0x40: 0x05121014 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0844d070 0x00000000 0x00000000 0x01d21022
0x90: 0x606402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000001 0x0000000f
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pcic1: <TI PCI-1520 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq
11 at device 0.1 on pci2
pcic1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa
irq]
pcic1: PCI Configuration space:
0x00: 0xac55104c 0x02100107 0x06070001 0x00824008
0x10: 0x51000000 0x020000a0 0xb0080602 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x0760020b
0x40: 0x05121014 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0844d070 0x00000000 0x00000000 0x01d21022
0x90: 0x606402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000001 0x0000000f
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard1: <PC Card 16-bit bus (classic)> on pcic1
fxp0: <Intel Pro/100 Ethernet> port 0x8000-0x803f mem
0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2
fxp0: using memory space register mapping
fxp0: Ethernet address 00:09:6b:e3:27:39
fxp0: PCI IDs: 8086 1031 1014 0209 0042
fxp0: Dynamic Standby mode is disabled
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device
31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1860
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1868
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: mask=03 stat0=00 stat1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq
11 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus general purpose I/O> on smbus0
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at
device 31.5 on pci0
pcm0: <Analog Devices AD1881A ac97 codec>
pcm0: ac97 codec features headphone, 6 bit master volume, Analog
Devices Phat Stereo
pcm0: ac97 primary codec extended features variable rate PCM
pcm0: sndbuf_setmap 1e000, 4000; 0xe1d68000 -> 1e000
pcm0: sndbuf_setmap 22000, 4000; 0xe1d6c000 -> 22000
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
eisa0: <EISA bus> on motherboard
eisa0: unknown card @H@0000 (0x01000000) at slot 1
ata-: ata0 exists, using next available unit number
pcic-: pcic0 exists, using next available unit number
pcic-: pcic1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem
0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-
0xeffff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this
adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 06 e0 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 06 e0 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic2 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic3 failed to probe at port 0x3e2 iomem 0xd4000 on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: parallel port found at 0x3bc
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at port 0x3bc-0x3c3 irq 7 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c800, tty 631812, net 671812
bpf: sl0 attached
bpf: faith0 attached
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to accept, logging disabled
ata1-slave: ATAPI identify retries exceeded
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <IC25N040ATCS05-0/CS4OA61A> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <UJDA720 DVD/CDRW/1.03> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 1377KB/s (1377KB/s), 2048KB
buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 47989 Hz, will use 48000 Hz
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0x7, start 40960143, end = 75403439, size 34443297 : OK
ad0s2: type 0xa5, start 63, end = 40960079, size 40960017 : OK
start_init: trying /sbin/init
bpf: gif0 attached
Linux ELF exec handler installed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200306220853370342.0930E0BD>