Date: Sun, 7 May 2000 13:23:01 +0200 From: Wilko Bulte <wkb@chello.nl> To: =?iso-8859-1?Q?G=E9rard_Roudier?= <groudier@club-internet.fr> Cc: Matthew Jacob <mjacob@feral.com>, alpha@FreeBSD.ORG Subject: Re: AlphaServer 4100 Support being integrated Message-ID: <20000507132301.B19972@jedi.wbnet> In-Reply-To: <Pine.LNX.4.10.10005071019200.709-100000@linux.local>; from groudier@club-internet.fr on Sun, May 07, 2000 at 12:15:48PM %2B0200 References: <Pine.BSF.4.05.10005062244120.20474-100000@semuta.feral.com> <Pine.LNX.4.10.10005071019200.709-100000@linux.local>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, May 07, 2000 at 12:15:48PM +0200, G=E9rard Roudier wrote: > On Sat, 6 May 2000, Matthew Jacob wrote: >=20 > [...] >=20 > > sym0: <810> port 0x1fffc00-0x1fffcff mem 0x7fdde00-0x7fddeff irq 4 at= device 1.0 on pci0 > > sym0: No NVRAM, ID 7, Fast-10, SE, parity checking > > sym0: open drain IRQ line driver > > sym0: using NCR-generic firmware. > > sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 =3D (hex) 00/00/00/00/00/= 00 > > sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 =3D (hex) 03/c8/00/00/08/= 00 > > sym0: Delay (GEN=3D11): 403 msec, 22055 KHz > > sym0: Delay (GEN=3D11): 426 msec, 20864 KHz > > sym0: Delay (GEN=3D11): 426 msec, 20864 KHz >=20 > [...] >=20 > Based on the boot messages, estimation of PCI clock frequency by the > driver is about 20 MHz. Is it correct ? I doubt it. AFAIK the Rawhide/4100 uses a normal 33Mc PCI bus clock. --=20 Wilko Bulte Powered by FreeBSD http://www.freebsd.org http://www.tcja.nl To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000507132301.B19972>