Date: Fri, 26 Dec 2003 10:54:27 -0800 (PST) From: Sean Welch <welchsm@earthlink.net> To: John Baldwin <jhb@FreeBSD.org> Cc: freebsd-hackers@freebsd.org Subject: RE: Unprobed PCI bus on VXPro II chipset Message-ID: <15259089.1072464867529.JavaMail.root@grover.psp.pas.earthlink.net>
next in thread | raw e-mail | index | archive | help
That change seems to have done it!!
I left in the extra PCI IDs I had added to pcisupport.c
and pci_cfgreg.c -- looks like that helps get things
going. I've got "options PCI_ENABLE_IO_MODES" in
the kernel. I've also got "device puc" due to a suggestion
from fbsd_user on freebsd-questions.
The USB card doesn't seem to be attaching but I do see
the WinTV card!
Any other suggestions based on what you see below?
The output of pciconf -l is as follows:
pcib4@pci0:5:0: class=0x060000 card=0x80113388 chip=0x80113388 rev=0x00 hdr=0x00
pcib5@pci0:5:1: class=0x060100 card=0x80123388 chip=0x80123388 rev=0x00 hdr=0x00
pcib6@pci0:5:2: class=0x010100 card=0x80133388 chip=0x80133388 rev=0x00 hdr=0x00
bktr0@pci0:8:0: class=0x040000 card=0x13eb0070 chip=0x036e109e rev=0x02 hdr=0x00
none0@pci0:8:1: class=0x048000 card=0x13eb0070 chip=0x0878109e rev=0x02 hdr=0x00
pcib7@pci0:9:0: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x04 hdr=0x00
none1@pci0:10:0: class=0x030000 card=0x89015333 chip=0x89015333 rev=0x16 hdr=0x00
Here is the verbose dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #8: Tue Oct 14 16:25:24 CDT 2003
root@:/usr/src/sys/compile/WARPPHYS
Calibrating clock(s) ... TSC clock: 233912110 Hz, i8254 clock: 1193430 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium/P55C (233.87-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x000001000 - 0x00009efff, 647168 bytes (158 pages)
0x00055c000 - 0x003ff7fff, 61456384 bytes (15004 pages)
config> en ed0
config> po ed0 0x340
config> ir ed0 10
config> iom ed0 0xd8000
config> f ed0 0
config> q
avail memory = 60002304 (58596K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fdb00
bios32: Entry = 0xfdb10 (c00fdb10) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xdb31
pnpbios: Found PnP BIOS data at 0xc00f8450
pnpbios: Entry = f0000:7dae Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0535000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc053509c.
Intel Pentium detected, installing workaround for F00F bug
Creating DISK md0
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x0000ff00
pci_open(1a): mode1res=0xffffff1c (0x80000000)
pci_cfgcheck: device 0 1 2 3 4 5 [class=060000] [hdr=80] is there (id=80113388
)
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 288267512 bytes/sec
bios32: Found BIOS32 Service Directory header at 0xc00fdb00
bios32: Entry = 0xfdb10 (c00fdb10) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xdb31
pnpbios: Found PnP BIOS data at 0xc00f8450
pnpbios: Entry = f0000:7dae Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0535000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc053509c.
Intel Pentium detected, installing workaround for F00F bug
Creating DISK md0
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x0000ff00
pci_open(1a): mode1res=0xffffff1c (0x80000000)
pci_cfgcheck: device 0 1 2 3 4 5 [class=060000] [hdr=80] is there (id=80113388
)
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 288267512 bytes/sec
bios32: Found BIOS32 Service Directory header at 0xc00fdb00
bios32: Entry = 0xfdb10 (c00fdb10) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xdb31
pnpbios: Found PnP BIOS data at 0xc00f8450
pnpbios: Entry = f0000:7dae Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0535000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc053509c.
Intel Pentium detected, installing workaround for F00F bug
Creating DISK md0
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x0000ff00
pci_open(1a): mode1res=0xffffff1c (0x80000000)
pci_cfgcheck: device 0 1 2 3 4 5 [class=060000] [hdr=80] is there (id=80113388
)
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 288267512 bytes/sec
bios32: Found BIOS32 Service Directory header at 0xc00fdb00
bios32: Entry = 0xfdb10 (c00fdb10) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xdb31
pnpbios: Found PnP BIOS data at 0xc00f8450
pnpbios: Entry = f0000:7dae Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0535000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc053509c.
Intel Pentium detected, installing workaround for F00F bug
Creating DISK md0
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x0000ff00
pci_open(1a): mode1res=0xffffff1c (0x80000000)
pci_cfgcheck: device 0 1 2 3 4 5 [class=060000] [hdr=80] is there (id=80113388
)
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 288267512 bytes/sec
bzero() bandwidth = 147797812 bytes/sec
pcib0: <VXPro II Chipset CPU to PCI Bridge> on motherboard
found-> vendor=0x3388, dev=0x8011, revid=0x00
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x3388, dev=0x8012, revid=0x00
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x3388, dev=0x8013, revid=0x00
class=01-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x109e, dev=0x036e, revid=0x02
class=04-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base ffafe000, size 12
found-> vendor=0x109e, dev=0x0878, revid=0x02
class=04-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base ffaff000, size 12
found-> vendor=0x1106, dev=0x3038, revid=0x04
class=0c-03-00, hdrtype=0x00, mfdev=0
bzero() bandwidth = 147797812 bytes/sec
pcib0: <VXPro II Chipset CPU to PCI Bridge> on motherboard
found-> vendor=0x3388, dev=0x8011, revid=0x00
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x3388, dev=0x8012, revid=0x00
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x3388, dev=0x8013, revid=0x00
class=01-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x109e, dev=0x036e, revid=0x02
class=04-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base ffafe000, size 12
found-> vendor=0x109e, dev=0x0878, revid=0x02
class=04-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base ffaff000, size 12
found-> vendor=0x1106, dev=0x3038, revid=0x04
class=0c-03-00, hdrtype=0x00, mfdev=0
bzero() bandwidth = 147797812 bytes/sec
pcib0: <VXPro II Chipset CPU to PCI Bridge> on motherboard
found-> vendor=0x3388, dev=0x8011, revid=0x00
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x3388, dev=0x8012, revid=0x00
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x3388, dev=0x8013, revid=0x00
class=01-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x109e, dev=0x036e, revid=0x02
class=04-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base ffafe000, size 12
found-> vendor=0x109e, dev=0x0878, revid=0x02
class=04-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base ffaff000, size 12
found-> vendor=0x1106, dev=0x3038, revid=0x04
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[20]: type 1, range 32, base 0000ef80, size 5
found-> vendor=0x5333, dev=0x8901, revid=0x16
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[10]: type 1, range 32, base ec000000, size 26
pci0: <PCI bus> on pcib0
pcib4: <VXPro II Chipset CPU to PCI Bridge> at device 5.0 on pci0
pcib5: <VXPro II Chipset PCI to ISA Bridge> at device 5.1 on pci0
pcib6: <VXPro II Chipset EIDE Controller> at device 5.2 on pci0
bktr0: <BrookTree 878> mem 0xffafe000-0xffafefff irq 9 at device 8.0 on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicbus: iic devclass not found
iicbus1: <Philips I2C bus> on iicbb0 master-only
iicbus: iic devclass not found
smbus0: <System Management Bus> on bti2c0
smbus: smb devclass not found
brooktree0: PCI bus latency is 64.
bktr0: buffer size 3555328, addr 0x69c000
bktr0: GPIO is 0x00fffffb
bktr0: subsystem 0x0070 0x13eb
bktr0: Hauppauge Model 61291 D110
bktr0: Hauppauge WinCast/TV, Philips NTSC tuner, remote control.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 8.1 irq 9
pcib7: <VIA 82C586B USB host controller> port 0xef80-0xef9f irq 11 at device 9.0
on pci0
pci0: <S3 Trio 64V2/DX/GX graphics accelerator> (vendor=0x5333, dev=0x8901) at 1
0.0 irq 0
pcib1: <VXPro II Chipset PCI to ISA Bridge> on motherboard
pci1: <PCI bus> on pcib1
pcib2: <VXPro II Chipset EIDE Controller> on motherboard
pci2: <PCI bus> on pcib2
pcib3: <VIA 82C586B USB host controller> on motherboard
pci3: <PCI bus> on pcib3
isa0: <ISA bus> on motherboard
Trying Read_Port at 203
CTL0045: start dependant
CTL0045: adding irq mask 0x20
CTL0045: adding dma mask 0x2
CTL0045: adding dma mask 0x20
CTL0045: adding io range 0x220-0x22f, size=0x10, align=0x1
CTL0045: adding io range 0x330-0x331, size=0x2, align=0x1
CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding dma mask 0xe0
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding dma mask 0xe0
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding dma mask 0xe0
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: start dependant
isa0: too many dependant configs (8)
CTL7002: start dependant
CTL7002: adding io range 0x200-0x207, size=0x8, align=0x1
CTL7002: start dependant
CTL7002: adding io range 0x200-0x20f, size=0x8, align=0x8
CTL7002: end dependant
CTL0022: start dependant
CTL0022: adding io range 0x620-0x623, size=0x4, align=0x1
CTL0022: start dependant
CTL0022: adding io range 0x620-0x683, size=0x4, align=0x20
CTL0022: end dependant
isa0: unexpected small tag 14
ex_isa_identify()
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 14 eb
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=09
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 00 00
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=50 stat1=00
ata1-master: ATA 01 a5
ata1: devices=01
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: the aux port is not functioning (-1).
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 at port 0x340-0x35f iomem 0xd8000-0xdbfff irq 10 drq 0 on isa0
bpf: ed0 attached
ed0: address 00:00:c0:e7:03:db, type SMC8216T (16 bit)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq
1,5 on isa0
sbc0: setting card to irq 5, drq 1, 5
pcm0: <SB16 DSP 4.16> on sbc0
pcm0: sndbuf_setmap 4000, 1000; 0xc61ad000 -> 4000
pcm0: sndbuf_setmap 5000, 1000; 0xc61ae000 -> 5000
adv1: Invalid baseport of 0x200 specified. Nearest valid baseport is 0x210. Fai
ling probe.
unknown: <Game> failed to probe at port 0x200-0x20f on isa0
adv1: Invalid baseport of 0x620 specified. Nearest valid baseport is 0x330. Fai
ling probe.
unknown: <WaveTable> failed to probe at port 0x620-0x62f on isa0
BIOS Geometries:
0:0209fe3f 0..521=522 cylinders, 0..254=255 heads, 1..63=63 sectors
1:0209fe3f 0..521=522 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c040, tty 6302ba, net 6706ba
bpf: sl0 attached
bpf: faith0 attached
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <ST34342A/0.42> ATA-2 disk at ata0-master
ad0: 4103MB (8404830 sectors), 8894 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, BIOSPIO
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
Creating DISK ad2
ar: FreeBSD check1 failed
ad2: <WDC AC34300L/21.10N21> ATA-3 disk at ata1-master
ad2: 4104MB (8406720 sectors), 8896 C, 15 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, BIOSPIO
ad2: piomode=4 dmamode=2 udmamode=2 cblid=0
unknown: <WaveTable> failed to probe at port 0x620-0x62f on isa0
BIOS Geometries:
0:0209fe3f 0..521=522 cylinders, 0..254=255 heads, 1..63=63 sectors
1:0209fe3f 0..521=522 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c040, tty 6302ba, net 6706ba
bpf: sl0 attached
bpf: faith0 attached
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <ST34342A/0.42> ATA-2 disk at ata0-master
ad0: 4103MB (8404830 sectors), 8894 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, BIOSPIO
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
Creating DISK ad2
ar: FreeBSD check1 failed
ad2: <WDC AC34300L/21.10N21> ATA-3 disk at ata1-master
ad2: 4104MB (8406720 sectors), 8896 C, 15 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, BIOSPIO
ad2: piomode=4 dmamode=2 udmamode=2 cblid=0
ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
acd0: <CRD-8482B/1.00> CDROM drive at ata0 as slave
acd0: read 8250KB/s (32KB/s), 128KB buffer, BIOSPIO
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked, lock protected
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 8404829, size 8404767 : OK
start_init: trying /sbin/init
Linux ELF exec handler installed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15259089.1072464867529.JavaMail.root>