Date: Mon, 29 Mar 2021 06:06:36 +0200 From: =?utf-8?Q?Klaus_K=C3=BCchemann?= <maciphone2@googlemail.com> To: freebsd-arm@freebsd.org Subject: Re: Any good alternative to Raspberry for Arm64? Message-ID: <6A771145-692F-4AD7-9E54-22DA4907D303@googlemail.com> In-Reply-To: <A0A43DB0-9FB8-4A9B-AB16-B33FE39B5A90@googlemail.com> References: <7b284f7718556f1cf0a7a205c98db6b1@pyret.net> <8F8F3491-3E1F-45C8-BF61-09F7557F48A5@googlemail.com> <265dbf9c33f4ce09c702c9d7fae93c9b@pyret.net> <D6C3F9FE-D34F-4CCB-80D6-46AC29F3AD39@gmail.com> <C166F287-91D2-408E-B43B-222D58EA52BD@googlemail.com> <D6A16CD3-A329-4BEB-A9A1-3E2D74E89903@gmail.com> <A0A43DB0-9FB8-4A9B-AB16-B33FE39B5A90@googlemail.com>
index | next in thread | previous in thread | raw e-mail
>
>> On 28 Mar 2021, at 21.48, Klaus Küchemann <maciphone2@googlemail.com> wrote:
>>>>
>>> … I`ll post some debug-output the next hours… (`guess pcie has mem alloc issue from dmesg)…
>
> …..Bla bla bla bla… problems with nvme on the M.2-slot… bla bla bla...
>
> Mounting from ufs:/dev/ufs/rootfs failed with error 19.
> ..bla bla bla…
The same nvme-drive in an external enclosure, directly plugged
Into the USB-port of the Rock960 :
Model: 96boards Rock960
Net: No ethernet found.
....Bla bla bla....
...Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found
scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found
scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found (!!!!!!!!!!!)
Hit any key to stop autoboot: 0
--
... not detected ...
Now the same nvme-drive in an external enclosure, plugged
into an USB3.0-hub WITH OR WITHOUT EXTERNAL POWER connected to the Rock960`s USB-port :
SoC: Rockchip rk3399
Reset cause: POR
Model: 96boards Rock960
DRAM: 3.9 GiB
PMIC: RK808
MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... Card did not respond to voltage select! : -110
*** Warning - No block device, using default envronment
In: serial
Out: serial
Err: serial
Model: 96boards Rock960
Net: No ethernet found.
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3a0000: USB OHCI 1.0
Bus usb@fe3c0000: USB EHCI 1.00
Bus usb@fe3e0000: USB OHCI 1.0
Bus dwc3: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus dwc3: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found
scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found
scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... cannot reset port 3!?
6 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found (!!!!)
-
…detected...
....rock960 => boot
...root@generic:~ # uname -a
FreeBSD generic 14.0-CURRENT FreeBSD 14.0-CURRENT #0 main-n245511-a771bf748f9: Thu Mar 18 08:07:18 UTC 2021 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
...
Last but not least :
the same nvme-drive in an external enclosure, directly plugged
into the USB-port of the RPI4b 4GB
( WITHOUT external Hub! ) (same result for the 8GB-model) :
U-Boot 2021.04-rc4 (Mar 28 2021 - 17:33:35 +0000)
DRAM: 3.9 GiB
RPI 4 Model B (0xc03111)
MMC: mmc@7e300000: 1, emmc2@7e340000: 0
Loading Environment from FAT... In: serial
Out: vidconsole
Err: vidconsole
Net: eth0: ethernet@7d580000
PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 6 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found (!!)
...
---
….detected ...
that clearly proves the s m o o t h l y power to serve of the RPI4b compared to everything else on the market ..
> Am 28.03.2021 um 21:13 schrieb Emmanuel Vadot <manu@bidouilliste.com>:
> ……
> lol ..
Ha Ha :-)
K.
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6A771145-692F-4AD7-9E54-22DA4907D303>