Date: Sat, 13 Dec 2003 00:31:44 +0900 (JST) From: Nakata Maho <chat95@mbox.kyoto-inet.or.jp> To: mb@imp.ch Cc: soeren@freebsd.org Subject: Re: Cdrecord broken with 5.2Beta and ATAPICAM Message-ID: <20031213.003144.730550799.chat95@mbox.kyoto-inet.or.jp> In-Reply-To: <20031129140232.N16675@cvs.imp.ch> References: <20031129140232.N16675@cvs.imp.ch>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, Martin > Since the ATAnG commit I'm no longer able to burn any > Cd's. 5.X, 5.1R did work. Yes. me too. > Writing pregap for track 1 at -150 > cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error > write track pad data: error after 0 bytes > CDB: 2A 00 FF FF FF 6A 00 00 1F 00 > BFree: 1568 K BSize: 1568 K > status: 0x2 (CHECK CONDITION) ^^^^^^^^same error > Starting new track at sector: 0 > Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 > Sense Key: 0xFFFFFFFF [], Segment 0 > Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 1.675s timeout 200s > cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error > CDB: 2A 00 00 00 00 00 00 00 1F 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 > Sense Key: 0xFFFFFFFF [], Segment 0 > Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.192s timeout 200s My log is following: scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Using libscg version 'schily-0.7' atapi: 0 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'PIONEER ' Identifikation : 'DVD-RW DVR-106D' Revision : '1.07' Device seems to be: Generic mmc2 DVD-R/DVD-RW. cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1267712 = 1238 KB FIFO size : 4194304 = 4096 KB Track 01: data 41 MB padsize: 30 KB Total size: 47 MB (04:42.44) = 21183 sectors Lout start: 47 MB (04:44/33) = 21183 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11746 (97:25/29) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 8 Manufacturer: Hitachi Maxell, Ltd. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 338666 Starting to write CD/DVD at speed 8 in dummy SAO mode for single session. Last chance to quit, starting dummy write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 41 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 01 17 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 200s write track data: error after 571392 bytes Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 04 08 00 00 00 00 Writing time: 5.260s Average write speed 55.5x. Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 18.870s cdrecord: fifo had 73 puts and 10 gets. cdrecord: fifo was 0 times empty and 2 times full, min fill was 92%. --maho
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031213.003144.730550799.chat95>