Date: Tue, 15 Oct 2002 21:31:48 +0300 From: Maxim Mazurok <maxim@km.ua> To: Jake Burkholder <jake@locore.ca> Cc: freebsd-sparc@FreeBSD.ORG Subject: Re: booting on Ultra AX fail Message-ID: <20021015213147.M304@km.ua> In-Reply-To: <20021015135344.I25928@locore.ca>; from jake@locore.ca on Tue, Oct 15, 2002 at 01:53:44PM -0400 References: <20021015200151.L304@km.ua> <20021015135344.I25928@locore.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Oct 15, 2002 at 01:53:44PM -0400, Jake Burkholder wrote:
>> I have OEM motherboard Ultra AX width processor UltraII 250Mz and IDE
>> HDD&CDROM (hme ethernet). I download iso image from home of Jake and
>> try to boot:
>>
>> ======cut======
>> ok boot cdrom
>> Resetting ...
>>
>> SPARCengine(tm)Ultra(tm) AX (UltraSPARC-II 248MHz), No Keyboard
>> OpenBoot 3.1.9, 128 MB memory installed, Serial #8877980.
>> Ethernet address 8:0:20:87:77:9c, Host ID: 8087779c.
>>
>> Rebooting with command: boot cdrom
>> Boot device: /pci@1f,4000/ide@3/ata@1,0/cmdk@0,0:f File and args:
>>
>> >> FreeBSD/sparc64 boot block
>> Boot path: /pci@1f,4000/ide@3/ata@1,0/cmdk@0,0:f
>> Boot loader: /boot/loader
>> Console: OpenFirmware console
>> disk0 is /pci@1f,4000/ide@3/ata@1,0/cmdk@0
>> FreeBSD/sparc64 loader
>> bootpath="/pci@1f,4000/ide@3/ata@1,0/cmdk@0,0:f"
>> loaddev=disk0s0a:
>> > \
>> \: unknown command
>> |
>> /boot/kernel/kernel data=0x2f7e08+0xec338 syms=[0x8+0x435c0+0x8+0x3527b]
>> Hit [Enter] to boot immediately, or any other key for command prompt.
>> Booting [/boot/kernel/kernel]...
>> nothing to autoload yet.
>> jumping to kernel entry at 0xc0038000.
>> stray vector interrupt 2029
>> Copyright (c) 1992-2002 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>> The Regents of the University of California. All rights reserved.
>> FreeBSD 5.0-CURRENT #0: Mon Jun 24 05:46:27 GMT 2002
>> jake@u60.locore.ca:/usr/obj/usr/current/src/sys/GENERIC
>> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0460000.
>> Timecounter "tick" frequency 248000000 Hz
>> cpu0: Sun Microsystems UltraSparc-II Processor (248.00 MHZ CPU)
>> nexus0: <OpenFirmware Nexus device>
>> nexus0: <pci>, type pci (no driver attached)
>> nexus0: <pci>, type pci (no driver attached)
>> Timecounters tick every 10.000 msec
>>
>> Manual root filesystem specification:
>> <fstype>:<device> Mount <device> using filesystem <fstype>
>> eg. ufs:da0a
>> ? List valid disk boot devices
>> <empty line> Abort manual input
>>
>> mountroot>
>> panic: Root mount failed, startup aborted.
>> cpuid = 0; Debugger("panic")
>> Stopped at `? x+0x1c: ta %xcc, 1
>> db> halt
>> Program terminated
>> ok
>> ======cut======
>>
>> Where is my mistake?
>
>You made no mistake, it seems that machine has an unsupported pci bus
>so no devices were probed. Thomas Moestl who ported the pci drivers is
>currently on vacation, but I'll mention this to him when he gets back
>and hopefully we can get it fixed.
hmmm. i can open shell account for you on freebsd/i386 near this sun width
serial console from sun. you need it?
>Are you able to boot solaris and send us the output of prtconf?
on this sun i have generic installation of SunOS 5.7. only for complete
hardware testing.
see:
# uname -a
SunOS sun.km.ua 5.7 Generic_106541-08 sun4u sparc SUNW,Ultra-1-Engine
# prtconf
System Configuration: Sun Microsystems sun4u
Memory size: 128 Megabytes
System Peripherals (Software Nodes):
SUNW,Ultra-1-Engine
packages (driver not attached)
terminal-emulator (driver not attached)
deblocker (driver not attached)
obp-tftp (driver not attached)
disk-label (driver not attached)
ufs-file-system (driver not attached)
cdfs (driver not attached)
cmdk (driver not attached)
ufs-file-system (driver not attached)
chosen (driver not attached)
openprom (driver not attached)
client-services (driver not attached)
options, instance #0
aliases (driver not attached)
memory (driver not attached)
virtual-memory (driver not attached)
counter-timer (driver not attached)
pci, instance #0
ebus, instance #0
auxio (driver not attached)
power (driver not attached)
SUNW,pll (driver not attached)
sc (driver not attached)
se, instance #0
su, instance #0
su, instance #1
ecpp (driver not attached)
fdthree (driver not attached)
eeprom (driver not attached)
flashprom (driver not attached)
beeper (driver not attached)
network, instance #0
ATI,Video-Xpression, instance #1
ide, instance #0
ata, instance #0
cmdk (driver not attached)
disk_ata, instance #0
ata, instance #1
cmdk (driver not attached)
sd, instance #0
pci, instance #1
SUNW,UltraSPARC-II (driver not attached)
pseudo, instance #0
# dmesg
SunOS Release 5.7 Version Generic_106541-08 64-bit [UNIX(R) System V Release 4.0]
Copyright (c) 1983-1999, Sun Microsystems, Inc.
Ethernet address = 8:0:20:87:77:9c
mem = 131072K (0x8000000)
avail mem = 122028032
root nexus = SPARCengine(tm)Ultra(tm) AX (UltraSPARC-II 248MHz)
pci0 at root: UPA 0x1f 0x4000
pci0 is /pci@1f,4000
pci1 at root: UPA 0x1f 0x2000
pci1 is /pci@1f,2000
Probing IDE slots(0-3)
ata@0
.
atapi@2
.
Oct 15 21:09:06 sun.km.ua unix:
PCI-device: ide@3, Neide0
Neide0 is /pci@1f,4000/ide@3
disk_ata0 at pci100b,20
ata 0
target 0 lun 0
disk_ata0 is /pci@1f,4000/ide@3/ata@0,0/disk_ata@0,0
<WDC AC23200L cyl 6294 alt 2 hd 16 sec 63>
root on /pci@1f,4000/ide@3/ata@0,0/cmdk@0,0:a fstype ufs
PCI-device: ebus@1, ebus0
su0 at ebus0: offset 14,3083f8
su0 is /pci@1f,4000/ebus@1/su@14,3083f8
su1 at ebus0: offset 14,3062f8
su1 is /pci@1f,4000/ebus@1/su@14,3062f8
keyboard is </pci@1f,4000/ebus@1/su@14,3083f8> major <37> minor <0>
mouse is </pci@1f,4000/ebus@1/su@14,3062f8> major <37> minor <1>
se0 at ebus0: offset 14,400000
se0 is /pci@1f,4000/ebus@1/se@14,400000
stdin is </pci@1f,4000/ebus@1/se@14,400000:a> major <20> minor <0>
stdout is </pci@1f,4000/ebus@1/se@14,400000:a> major <20> minor <0>
cpu0: SUNW,UltraSPARC-II (upaid 0 impl 0x11 ver 0x11 clock 248 MHz)
SUNW,hme0: CheerIO 2.0 (Rev Id = c1) Found
PCI-device: network@1,1, hme0
hme0 is /pci@1f,4000/network@1,1
dump on /dev/dsk/c0t0d0s1 size 148 MB
SUNW,hme0: Using Internal Transceiver
SUNW,hme0: 100 Mbps full-duplex Link Up
pseudo-device: pm0
pm0 is /pseudo/pm@0
PCI-device: ATI,Video-Xpression@2, m641
m641 is /pci@1f,4000/ATI,Video-Xpression@2
m64#1: 1024x768, 2M mappable, rev 5654.40
pseudo-device: tod0
tod0 is /pseudo/tod@0
pseudo-device: devinfo0
devinfo0 is /pseudo/devinfo@0
pseudo-device: vol0
vol0 is /pseudo/vol@0
sd0 at pci100b,20
ata 1
target 2 lun 0
sd0 is /pci@1f,4000/ide@3/ata@1,0/sd@0,0
PCI-device: ATI,Video-Xpression@2, m641
m641 is /pci@1f,4000/ATI,Video-Xpression@2
m64#1: 1024x768, 2M mappable, rev 5654.40
pseudo-device: devinfo0
devinfo0 is /pseudo/devinfo@0
#
--
Maxim Mazurok (MMP2-RIPE)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-sparc" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021015213147.M304>