Date: Wed, 4 Dec 2002 23:19:56 +0100 From: Thierry Herbelot <thierry@herbelot.com> To: "freebsd-hackers@FreeBSD.ORG" <freebsd-hackers@FreeBSD.ORG>, hardware@FreeBSD.ORG Subject: problems with a firewire external hard disk [long] Message-ID: <200212042319.56065.thierry@herbelot.com>
next in thread | raw e-mail | index | archive | help
Hello,
I can't seem to use my new external firewire hard disk :
(this is with 5.0-DP2, there are the same kinds of symptoms under 4.7-Stable)
My main question is to know where the problems are : is the hard disk dead ?
is the firewire/ATA bridge fried ? are all problems due to the driver ?
Any help very much appreciated
(or hints to get debugging / trace info)
TfH
Here follows a list of problems encountered :
1/ error messages at startup
============================================
when booting, the disk is detected as : (for 5.0-DP2)
firewire0:Discover new S400 device ID:00a0b800370000aa
bus_explore done
Device SBP-II
sbp_post_explore: EUI:00a0b800370000aa spec=1 key=1.
sbp0:0:0 LOGIN
sbp0:0:0 ordered:0 type:0 EUI:00a0b800370000aa node:0 speed:2 maxrec:5 new!
sbp0:0:0 'LSI Logic' 'SYM13FW500-DISK DRIVE' 'a0b835'
sbp0:0:0 login: len 16, ID 0, cmd 0000fffff0010000, recon_hold 1
sbp0:0:0 sbp_busy_timeout
sbp0:0:0 sbp_agent_reset
sbp0:0:0 sbp_do_attach
sbp0:0:0 sbp_cam_scan_lun
sbp0:0:0 ORB status src:1 resp:0 dead:1 len:3 stat:c orb:0008c83a4
sbp0:0:0 Request aborted
sbp0:0:0 sbp_agent_reset
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 80 00 ff 00 00 00 00 00, flags: 0x40, 6b
cmd/255b data/18b sense
sbp0:0:0 SCSI status 2 sfmt 0 valid 0 key 5 code 24 qlfr 0 len 3
sbp0:0:0 ORB status src:1 resp:0 dead:1 len:3 stat:c orb:0008c84d8
sbp0:0:0 Request aborted
sbp0:0:0 sbp_agent_reset
sbp0:0:0 XPT_SCSI_IO: cmd: 00 00 00 00 00 00 00 00 00 00, flags: 0xc0, 6b
cmd/0b data/32b sense
sbp0:0:0 SCSI status 2 sfmt 0 valid 0 key 6 code 29 qlfr 0 len 3
sbp0:0:0 ORB status src:1 resp:0 dead:1 len:3 stat:c orb:0008c89a8
sbp0:0:0 Request aborted
sbp0:0:0 sbp_agent_reset
sbp0:0:0 XPT_SCSI_IO: cmd: 12 01 80 00 ff 00 00 00 00 00, flags: 0x40, 6b
cmd/255b data/18b sense
sbp0:0:0 SCSI status 2 sfmt 0 valid 0 key 5 code 24 qlfr 0 len 3
da0 at sbp0 bus 0 target 0 lun 0
da0: <LSI Logi SYM13FW500-DISK b835> Fixed Simplified Direct Access SCSI-0
device
da0: 50.000MB/s transfers
da0: 28615MB (58605120 512 byte sectors: 255H 63S/T 3648C)
I'm a bit disturbed by the "Request aborted" messages
2/ Geometry problems
============================================
furthermore, I can't use more than the first 1024 cylinders of the disk : I
cannot create a BIOS partition above cylinder 1024 (all partitions seem cut
at 1024, when seen from the 4.7-Stable of 5.0 fdisk, even when forcing 3648
cylinders for the size)
for now, I've tried to just use 4 1G partitions :
portable-cur# fdisk da0
******* Working on device /dev/da0 *******
parameters extracted from in-core disklabel are:
cylinders=3648 heads=255 sectors/track=63 (16065 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=3648 heads=255 sectors/track=63 (16065 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 2040192 (996 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 126/ head 254/ sector 63
The data for partition 2 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 2040255, size 2040255 (996 Meg), flag 80 (active)
beg: cyl 127/ head 0/ sector 1;
end: cyl 253/ head 254/ sector 63
The data for partition 3 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 4080510, size 2040255 (996 Meg), flag 80 (active)
beg: cyl 254/ head 0/ sector 1;
end: cyl 380/ head 254/ sector 63
The data for partition 4 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 6120765, size 2040255 (996 Meg), flag 80 (active)
beg: cyl 381/ head 0/ sector 1;
end: cyl 507/ head 254/ sector 63
portable-cur#
(why are all partitions active ?)
3/ Write errors
============================================
when I try to write to any partitions, one write operations ends "as stuck",
with an error message such as :
Dec 4 21:41:09 portable-cur kernel: sbp_scsi_status: unknown scsi status
Dec 4 21:41:09 portable-cur kernel: sbp0:0:0 sbp_abort_ocb 0x1b
Dec 4 21:41:09 portable-cur kernel: sbp0:0:0 XPT_SCSI_IO: cmd: 2a 00 00 00 00
9f 00 00 20 00, flags: 0x80, 10b cmd/16384b data/32b sense
Dec 4 21:41:09 portable-cur kernel: sbp0:0:0 ORB status src:0 resp:1 dead:1
len:3 stat:4 orb:0008c8fac
Dec 4 21:41:09 portable-cur kernel: sbp0:0:0 Object: Operation request block
(ORB), Serial Bus Error: Busy retry limit exceeded(X)
Dec 4 21:41:09 portable-cur kernel: sbp0:0:0 unordered execution order:1
Dec 4 21:41:09 portable-cur kernel: sbp0:0:0 sbp_agent_reset
Dec 4 21:41:09 portable-cur kernel: sbp0:0:0 XPT_SCSI_IO: cmd: 2a 00 00 00 00
9f 00 00 20 00, flags: 0x80, 10b cmd/16384b data/32b sense
Dec 4 21:41:09 portable-cur kernel: sbp0:0:0 SCSI status 8 sfmt 0 valid 0 key
b code 8 qlfr 0 len 3
Dec 4 21:41:09 portable-cur kernel: sbp_scsi_status: unknown scsi status
Dec 4 21:41:09 portable-cur kernel: sbp0:0:0 sbp_abort_ocb 0x1b
Dec 4 21:41:09 portable-cur kernel: sbp0:0:0 XPT_SCSI_IO: cmd: 2a 00 00 00 00
7f 00 00 20 00, flags: 0x80, 10b cmd/16384b data/32b sense
Dec 4 21:41:10 portable-cur kernel: sbp0:0:0 ORB status src:0 resp:1 dead:1
len:3 stat:4 orb:0008c9214
Dec 4 21:41:10 portable-cur kernel: sbp0:0:0 Object: Operation request block
(ORB), Serial Bus Error: Busy retry limit exceeded(X)
Dec 4 21:41:10 portable-cur kernel: sbp0:0:0 unordered execution order:1
Dec 4 21:41:10 portable-cur kernel: sbp0:0:0 sbp_agent_reset
Dec 4 21:41:10 portable-cur kernel: sbp0:0:0 XPT_SCSI_IO: cmd: 2a 00 00 00 00
7f 00 00 20 00, flags: 0x80, 10b cmd/16384b data/32b sense
Dec 4 21:41:10 portable-cur kernel: sbp0:0:0 SCSI status 8 sfmt 0 valid 0 key
b code 8 qlfr 0 len 3
Dec 4 21:41:10 portable-cur kernel: sbp_scsi_status: unknown scsi status
Dec 4 21:41:10 portable-cur kernel: sbp0:0:0 sbp_abort_ocb 0x1b
Dec 4 21:41:10 portable-cur kernel: sbp0:0:0 XPT_SCSI_IO: cmd: 2a 00 00 00 00
9f 00 00 20 00, flags: 0x80, 10b cmd/16384b data/32b sense
Dec 4 21:41:11 portable-cur kernel: sbp0:0:0 ORB status src:0 resp:1 dead:1
len:3 stat:4 orb:0008c947c
Dec 4 21:41:11 portable-cur kernel: sbp0:0:0 Object: Operation request block
(ORB), Serial Bus Error: Busy retry limit exceeded(X)
============================================
PS : I recently tried to read from the firewire disk of a colleague, which was
formatted as HFS+, so these attempts did not go very far
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200212042319.56065.thierry>