Date: Fri, 05 Nov 2004 09:34:15 -0500 From: "Justin R. Smith" <jsmith@drexel.edu> To: freebsd-stable@freebsd.org Subject: Attempting to print rebooted my machine Message-ID: <1099665255.758.5.camel@localhost>
next in thread | raw e-mail | index | archive | help
FreeBSD jsmith.org 5.3-STABLE FreeBSD 5.3-STABLE #0: Thu Oct 28 07:57:24
EDT 2004 root@:/usr/obj/usr/src/sys/MYKERNEL i386
I have two printers attached to my machine: a USB inkjet and a laser
printer connected to the printer port.
I attempted to print an OpenOffice document on my laser printer, but
accidentally sent it to the inkjet. I immediately reissued the print
command properly. Both printers started up and the screen went blank and
the boot sequence appeared.
I'm running with the kernel debugger, but it never fell into the
debugger.
I should mention that if printed things before on both printers (but
never at the same time).
I'm running the Nvidia graphics driver.
Any ideas?
My dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Thu Oct 28 07:57:24 EDT 2004
root@:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 1073725440 (1023 MB)
avail memory = 1032712192 (984 MB)
ACPI APIC Table: <ASUS P4S533 >
ioapic0 <Version 0.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P4S533> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 645DX host to AGP bridge> mem 0xe8000000-0xebffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce4 MX 440 with AGP8X> mem
0xf0000000-0xf7ffffff,0xe7000000-0xe7ffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 20 at
device 2.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ulpt0: Canon S600, rev 1.10/2.20, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ohci1: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 23 at
device 2.3 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 961 UDMA100 controller> port
0xd800-0xd80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.5 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
sis0: <SiS 900 10/100BaseTX> port 0xb000-0xb0ff mem
0xe5800000-0xe5800fff irq 22 at device 3.0 on pci0
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:e0:18:94:ce:14
pcm0: <CMedia CMI8738> port 0xa800-0xa8ff irq 17 at device 5.0 on pci0
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq
3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounter "TSC" frequency 2400182740 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 38172MB <MAXTOR 6L040L2/A93.0500> [77557/16/63] at ata0-master
UDMA100
ad1: 39205MB <Maxtor 6E040L0/NAR61590> [79656/16/63] at ata0-slave
UDMA100
acd0: CDRW <AOPEN CD-RW CRW2440/2.06> at ata1-master PIO4
acd1: DVDROM <JLMS DVD-ROM LTD-166S/DS08> at ata1-slave UDMA40
cd0 at ata1 bus 0 target 0 lun 0
cd0: <AOPEN CD-RW CRW2440 2.06> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <JLMS DVD-ROM LTD-166S DS08> Removable CD-ROM SCSI-0 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad1s1a
WARNING: / was not properly dismounted
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 done
No buffers busy after final sync
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Thu Oct 28 07:57:24 EDT 2004
root@:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2400.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 1073725440 (1023 MB)
avail memory = 1032712192 (984 MB)
ACPI APIC Table: <ASUS P4S533 >
ioapic0 <Version 0.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P4S533> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 20
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 645DX host to AGP bridge> mem 0xe8000000-0xebffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce4 MX 440 with AGP8X> mem
0xf0000000-0xf7ffffff,0xe7000000-0xe7ffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 20 at
device 2.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ulpt0: Canon S600, rev 1.10/2.20, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ohci1: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 23 at
device 2.3 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 961 UDMA100 controller> port
0xd800-0xd80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.5 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
sis0: <SiS 900 10/100BaseTX> port 0xb000-0xb0ff mem
0xe5800000-0xe5800fff irq 22 at device 3.0 on pci0
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:e0:18:94:ce:14
pcm0: <CMedia CMI8738> port 0xa800-0xa8ff irq 17 at device 5.0 on pci0
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq
3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounter "TSC" frequency 2400176596 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 38172MB <MAXTOR 6L040L2/A93.0500> [77557/16/63] at ata0-master
UDMA100
ad1: 39205MB <Maxtor 6E040L0/NAR61590> [79656/16/63] at ata0-slave
UDMA100
acd0: CDRW <AOPEN CD-RW CRW2440/2.06> at ata1-master PIO4
acd1: DVDROM <JLMS DVD-ROM LTD-166S/DS08> at ata1-slave UDMA40
cd0 at ata1 bus 0 target 0 lun 0
cd0: <AOPEN CD-RW CRW2440 2.06> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <JLMS DVD-ROM LTD-166S DS08> Removable CD-ROM SCSI-0 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad1s1a
ipfw2 initialized, divert disabled, rule-based forwarding disabled,
default to deny, logging disabled
--
Time blows wildly against my door | Justin R. Smith
Stirring discarded sorrows | Mathematics Department
Like dead leaves of summers past | Drexel University
Shadows of what went before | Philadelphia, PA 19104
Making way for new tomorrows |
New hopes, new fears, | Office: (215) 895-1847
and new ways that last | URL: vorpal.math.drexel.edu
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1099665255.758.5.camel>