Date: Fri, 18 Nov 2016 21:41:47 +0100 From: Andy Mender <andymenderunix@gmail.com> To: Adrian Chadd <adrian.chadd@gmail.com>, freebsd-wireless@freebsd.org Subject: Re: Broadcom BCM 43xx wireless chips Message-ID: <CAHVfhuck_vxmn9yZZc7Y8MHS4QT5nNRhAsuqxKaEw8z3uG7F0Q@mail.gmail.com> In-Reply-To: <CAJ-Vmok1QD3mWk_oXHFk=8MeBV2AGhhEBXpwn6zALwtpJafM9A@mail.gmail.com> References: <CAHVfhueFRSdYfh1AJYUf52yceUhttMaUP88LXUV9AYZQrZyCpg@mail.gmail.com> <CAOc73CCdNmyzShnxvmDXdmzEVT77b07yM2U7VJLPeyJL=EXS8w@mail.gmail.com> <CAHVfhuff3U=0-5SxSLekmGQ0QpxjzuHcy8Xn_iqNxRF9TVP=DA@mail.gmail.com> <CAJ-VmonDnMT7TBLDbBvyDft2B4EUJyXOZfnOwZLBozKViKiK1w@mail.gmail.com> <CAHVfhuckON1JJBXLGwAGhzvjLbiQoOTDZ-YkNqw0ur5myYrfpg@mail.gmail.com> <CAHVfhucru54c9iWt4tb_NGAm4iJSwjEJ%2Bwy_31hVOJFyOr3tcQ@mail.gmail.com> <CAJ-Vmok6M0qJDN_Uqn0Q9PPwp45eMbAMHMvt_9RrD2mrJ8=20g@mail.gmail.com> <CAHVfhud8=GPi%2Bexk8GnKxuv0yNoEpcevRFmJyTCO9pU=2cBqSw@mail.gmail.com> <CAJ-VmokbqexqFceDTpXEvhPmHHY0sjX23E=MXnzgozK7=ctC6A@mail.gmail.com> <CAHVfhudfwYpW0ft=WLgFe04RQBq0Qo9%2B=HhN-qZihUXMPTDAQg@mail.gmail.com> <CAJ-Vmok1QD3mWk_oXHFk=8MeBV2AGhhEBXpwn6zALwtpJafM9A@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Dear Adrian, No problem then, I can wait :). Meanwhile, I have my trusty Realtek-based USB dongle. Never too many of those! As a side note, will the datasheets published by Cypress help any? I mean, I'm not in a position to help with coding, especially not with writing wireless device drivers in C. However, I can do the end-user testing alright and you can consider me opted in. To that respect, I think you and your colleagues are doing a fantastic job with the coding. Props! Best regards, Andy On 18 November 2016 at 21:33, Adrian Chadd <adrian.chadd@gmail.com> wrote: > HI, > > no - it's a different PHY and different bus glue. :( > > > -a > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAHVfhuck_vxmn9yZZc7Y8MHS4QT5nNRhAsuqxKaEw8z3uG7F0Q>