Date: Mon, 5 Mar 2007 11:59:03 -0700 From: Mark Costlow <cheeks@swcp.com> To: Jack Vogel <jfvogel@gmail.com> Cc: freebsd-stable@freebsd.org, Mark Costlow <cheeks@swcp.com> Subject: Re: ARP problem with 6.2-STABLE Intel PRO/1000 NIC, latest em driver Message-ID: <20070305185903.GA9008@same.swcp.com> In-Reply-To: <2a41acea0703051002y2c721921wed7ff312dbb6dddd@mail.gmail.com> References: <20070305063006.GA17079@same.swcp.com> <20070305072535.GA6589@dwpc.dwlabs.ca> <2a41acea0703050841ub56c513y1504ebe0af8052de@mail.gmail.com> <20070305172201.GB7936@same.swcp.com> <2a41acea0703050929s7ebb7er2b8b206bd19be5a7@mail.gmail.com> <2a41acea0703051002y2c721921wed7ff312dbb6dddd@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Mar 05, 2007 at 10:02:26AM -0800, Jack Vogel wrote:
> On 3/5/07, Jack Vogel <jfvogel@gmail.com> wrote:
> >On 3/5/07, Mark Costlow <cheeks@swcp.com> wrote:
> >> On Mon, Mar 05, 2007 at 08:41:01AM -0800, Jack Vogel wrote:
> >> > >
> >> > >Maybe more of your dmesg might help as it could show interrrupt issues
> >> > >that perhaps others could help diagnose
> >> >
> >> > Yes, agreed, this might be revealing.
> >>
> >> Here's the full dmesg. Thanks for looking at this.
> >>
> >> ----------------------------
> >> Copyright (c) 1992-2007 The FreeBSD Project.
> >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> >> The Regents of the University of California. All rights reserved.
> >> FreeBSD is a registered trademark of The FreeBSD Foundation.
> >> FreeBSD 6.2-STABLE #0: Sun Mar 4 22:40:38 MST 2007
> >> root@ame4.swcp.com:/usr/obj/usr/src/sys/GENERIC
> >> ACPI APIC Table: <PTLTD APIC >
> >> Timecounter "i8254" frequency 1193182 Hz quality 0
> >> CPU: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (2000.08-MHz
> >686-class CPU)
> >> Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
> >>
> >Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
> >> MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> >>
> >Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,<b9>,CX16,<b14>,<b15>,<b18>>
> >> AMD Features=0x20000000<LM>
> >> AMD Features2=0x1<LAHF>
> >> Cores per package: 2
> >> real memory = 3489005568 (3327 MB)
> >> avail memory = 3414384640 (3256 MB)
> >> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> >> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> >> kbd1 at kbdmux0
> >> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
> >RF5413)
> >> acpi0: <PTLTD RSDT> on motherboard
> >> acpi0: Power Button (fixed)
> >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> >> cpu0: <ACPI CPU> on acpi0
> >> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> >> pci0: <ACPI PCI bus> on pcib0
> >> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> >> pci1: <ACPI PCI bus> on pcib1
> >> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
> >> pci2: <ACPI PCI bus> on pcib2
> >> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
> >> pci3: <ACPI PCI bus> on pcib3
> >> pcib4: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
> >> pci4: <ACPI PCI bus> on pcib4
> >> em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
> >0x2000-0x201f m
> >> em 0xda000000-0xda01ffff irq 18 at device 0.0 on pci4
> >> em0: Ethernet address: 00:30:48:8c:71:54
> >> em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
> >0x2020-0x203f m
> >> em 0xda020000-0xda03ffff irq 19 at device 0.1 on pci4
> >> em1: Ethernet address: 00:30:48:8c:71:55
> >> pcib5: <ACPI PCI-PCI bridge> at device 0.3 on pci1
> >> pci5: <ACPI PCI bus> on pcib5
> >> 3ware device driver for 9000 series storage controllers, version:
> >3.60.02.012
> >> twa0: <3ware 9000 series Storage Controller> port 0x3000-0x303f mem
> >0xd8000000-0
> >> xd9ffffff,0xda100000-0xda100fff irq 24 at device 1.0 on pci5
> >> twa0: [GIANT-LOCKED]
> >> twa0: INFO: (0x15: 0x1300): Controller details:: Model 9550SX-4LP, 4
> >ports, Firm
> >> ware FE9X 3.04.01.011, BIOS BE9X 3.04.00.002
> >> pci0: <base peripheral> at device 8.0 (no driver attached)
> >> pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
> >> pci6: <ACPI PCI bus> on pcib6
> >> uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 17 at
> >device 29.0
> >> on pci0
> >> uhci0: [GIANT-LOCKED]
> >> usb0: <UHCI (generic) USB controller> on uhci0
> >> usb0: USB revision 1.0
> >> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> >> uhub0: 2 ports with 2 removable, self powered
> >> uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 19 at
> >device 29.1
> >> on pci0
> >> uhci1: [GIANT-LOCKED]
> >> usb1: <UHCI (generic) USB controller> on uhci1
> >> usb1: USB revision 1.0
> >> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> >> uhub1: 2 ports with 2 removable, self powered
> >> uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at
> >device 29.2
> >> on pci0
> >> uhci2: [GIANT-LOCKED]
> >> usb2: <UHCI (generic) USB controller> on uhci2
> >> usb2: USB revision 1.0
> >> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> >> uhub2: 2 ports with 2 removable, self powered
> >> uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 16 at
> >device 29.3
> >> on pci0
> >> uhci3: [GIANT-LOCKED]
> >> usb3: <UHCI (generic) USB controller> on uhci3
> >> usb3: USB revision 1.0
> >> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> >> uhub3: 2 ports with 2 removable, self powered
> >> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xda600000-0xda6003ff irq
> >17 at d
> >> evice 29.7 on pci0
> >> ehci0: [GIANT-LOCKED]
> >> usb4: EHCI version 1.0
> >> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> >> usb4: <EHCI (generic) USB 2.0 controller> on ehci0
> >> usb4: USB revision 2.0
> >> uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> >> uhub4: 8 ports with 8 removable, self powered
> >> pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> >> pci7: <ACPI PCI bus> on pcib7
> >> pci7: <display, VGA> at device 1.0 (no driver attached)
> >> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> >> isa0: <ISA bus> on isab0
> >> atapci0: <Intel 63XXESB2 UDMA100 controller> port
> >0x1f0-0x1f7,0x3f6,0x170-0x177,
> >> 0x376,0x1880-0x188f at device 31.1 on pci0
> >> ata0: <ATA channel 0> on atapci0
> >> ata1: <ATA channel 1> on atapci0
> >> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> >> acpi_button0: <Power Button> on acpi0
> >> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> >> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> >> kbd0 at atkbd0
> >> atkbd0: [GIANT-LOCKED]
> >> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> >> psm0: [GIANT-LOCKED]
> >> psm0: model Generic PS/2 mouse, device ID 0
> >> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> >acpi0
> >> sio0: type 16550A
> >> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> >> sio1: type 16550A
> >> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
> >acpi0
> >> fdc0: [FAST]
> >> ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq
> >3 on ac
> >> pi0
> >> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> >> ppc0: FIFO with 16/16/9 bytes threshold
> >> ppbus0: <Parallel port bus> on ppc0
> >> plip0: <PLIP network interface> on ppbus0
> >> lpt0: <Printer> on ppbus0
> >> lpt0: Interrupt-driven port
> >> ppi0: <Parallel I/O> on ppbus0
> >> pmtimer0 on isa0
> >> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcc7ff on isa0
> >> sc0: <System console> at flags 0x100 on isa0
> >> sc0: VGA <16 virtual consoles, flags=0x300>
> >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> >> rue0: USBKR100 USB 10/100 LAN, rev 1.10/1.00, addr 2
> >> miibus0: <MII bus> on rue0
> >> ruephy0: <RealTek RTL8150 internal media interface> on miibus0
> >> ruephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> >> rue0: Ethernet address: 00:10:60:dd:ed:e9
> >> rue0: if_start running deferred for Giant
> >> Timecounter "TSC" frequency 2000078406 Hz quality 800
> >> Timecounters tick every 1.000 msec
> >> acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-4244N/B103> at ata0-master UDMA33
> >> da0 at twa0 bus 0 target 0 lun 0
> >> da0: <AMCC 9550SX-4LP DISK 3.04> Fixed Direct Access SCSI-3 device
> >> da0: 100.000MB/s transfers
> >> da0: 238408MB (488259584 512 byte sectors: 255H 63S/T 30392C)
> >> da1 at twa0 bus 0 target 1 lun 0
> >> da1: <AMCC 9550SX-4LP DISK 3.04> Fixed Direct Access SCSI-3 device
> >> da1: 100.000MB/s transfers
> >> da1: 238408MB (488259584 512 byte sectors: 255H 63S/T 30392C)
> >> Trying to mount root from ufs:/dev/da0s1a
> >> em0: link state changed to UP
> >> em0: promiscuous mode enabled
> >> em0: promiscuous mode disabled
> >> twa0: INFO: (0x04: 0x0029): Verify started: unit=0
> >> twa0: INFO: (0x04: 0x002B): Verify completed: unit=0
> >> ----------------------------
> >>
> >> This is while booting GENERIC. I can boot SMP and send that too if you
> >> suggest.
> >>
> >> Here's vmstat -i:
> >>
> >> interrupt total rate
> >> irq1: atkbd0 2 0
> >> irq6: fdc0 3 0
> >> irq14: ata0 47 0
> >> irq16: uhci3 14836 0
> >> irq17: uhci0 ehci0 25 0
> >> irq18: em0 uhci2 91850 2
> >> irq24: twa0 14828 0
> >> cpu0: timer 79015190 1999
> >> Total 79136781 2003
> >>
> >> Is the fact that em0 and uhci2 are sharing an interrupt significant?
> >
> >Possibly, but it should work. Could you try a kernel with that defined out?
> >Secondly, would it be possible to load the latest snapshot of CURRENT
> >to see how it behaves, it uses MSI and would indicate if this is an
> >interrupt thing, I still doubt this however.
> >
> >Look over your docs and see if there's some means to disable system
> >management, I still think its interfering. I have a group meeting in 10
> >mins,
> >I'll check on any known issues with this.
>
> Don't bother installing CURRENT, just got out of my meeting and I found
> out what the problem is. There is indeed an issue with management, and
> its something our test group isnt set up to test. I will send a patch to
> try sometime before end of day.
Ok, thanks. Just FYI, I did remove the USB and FDC support. No shared
IRQs now, but same results. I'll save my CURRENT cd for another day,
and await your patch. Thank you!
> PS Duane's email keeps bouncing on me.
Me too...
Mark
--
Mark Costlow | Southwest Cyberport | Fax: +1-505-232-7975
cheeks@swcp.com | Web: www.swcp.com | Voice: +1-505-232-7992
abq-strange.com -- Interesting photos taken in Albuquerque, NM
Last post: Art Is OK...And Dangerous - 2007-03-02 10:27:17
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070305185903.GA9008>