Date: Mon, 25 Aug 2003 01:45:05 -0600 From: "David R. Colyer" <david_colyer@activatormail.com> To: freebsd-current@freebsd.org Subject: Re: ATAng related panic Message-ID: <200308250145.05635.david_colyer@activatormail.com> In-Reply-To: <20030825160610738438.GyazMail.yosimoto@waishi.jp> References: <200308250659.h7P6xiF0090622@spider.deepcore.dk> <20030825160610738438.GyazMail.yosimoto@waishi.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Sir, I noticed in your dmesg that you have hyperthreading support on a 3 ghz p4 like mine. Could you email me and/or post your kernel config file and/or whatever else you did to get this to compile and work. Please!!!! dave On Monday 25 August 2003 01:06 am, Shin-ichi Yoshimoto wrote: > Subject: Re: ATAng related panic, > > On Mon, 25 Aug 2003 08:59:44 +0200 (CEST), Soren Schmidt wrote: > > OK, could you mail me your dmesg please ? > > OK, following: > > /boot/kernel/acpi.ko text=0x393bc data=0x170c+0xec0 > syms=[0x4+0x5b90+0x4+0x79ee] Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.1-CURRENT #49: Mon Aug 25 08:42:22 JST 2003 > yosimoto@daemon.kek.jp:/usr/obj/usr/src/sys/DAEMON > Preloaded elf kernel "/boot/kernel/kernel" at 0xc051b000. > Preloaded elf module "/boot/kernel/linux.ko" at 0xc051b244. > Preloaded elf module "/boot/kernel/ipfw.ko" at 0xc051b2f0. > Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc051b39c. > Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc051b448. > Preloaded elf module "/boot/kernel/radeon.ko" at 0xc051b4f4. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc051b5a0. > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.52-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC >A,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 1072889856 (1023 MB) > avail memory = 1036828672 (988 MB) > Programming 24 pins in IOAPIC #0 > IOAPIC #0 intpin 2 -> irq 0 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 > cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 > io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000 > Pentium Pro MTRR support enabled > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <INTEL D865PERL> on motherboard > pcibios: BIOS version 2.10 > Using $PIR table, 12 entries at 0xc00f3310 > acpi0: power button is handled as a fixed feature programming model. > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_cpu1: <CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > IOAPIC #0 intpin 16 -> irq 2 > IOAPIC #0 intpin 19 -> irq 16 > IOAPIC #0 intpin 18 -> irq 17 > IOAPIC #0 intpin 23 -> irq 18 > IOAPIC #0 intpin 17 -> irq 19 > agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device > 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > drm0: <ATI Radeon If R250 9000> port 0xa800-0xa8ff mem > 0xff7f0000-0xff7fffff,0xf0000000-0xf3ffffff irq 2 at device 0.0 on pci1 > info: [drm] AGP at 0xf8000000 64MB > info: [drm] Initialized radeon 1.9.0 20020828 on minor 0 > pci1: <display> at device 0.1 (no driver attached) > pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.6.6> port > 0xbc00-0xbc1f mem 0xff8e0000-0xff8fffff irq 17 at device 1.0 on pci2 em0: > Speed:N/A Duplex:N/A > uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 2 > at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on > uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xd000-0xd01f irq > 16 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> > on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd400-0xd41f irq > 17 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> > on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd800-0xd81f irq 2 > at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on > uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xffaffc00-0xffafffff irq 18 > at device 29.7 on pci0 ehci_pci_attach: companion usb0 > ehci_pci_attach: companion usb1 > ehci_pci_attach: companion usb2 > ehci_pci_attach: companion usb3 > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <EHCI (generic) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > fwohci0: <Lucent FW322/323> mem 0xff9ff000-0xff9fffff irq 19 at device 7.0 > on pci3 fwohci0: OHCI version 1.0 (ROM=0) > fwohci0: No. of Isochronous channel is 8. > fwohci0: EUI64 00:07:e9:00:00:70:f9:c4 > fwohci0: Phy 1394a available S400, 3 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > sbp0: <SBP2/SCSI over firewire> on firewire0 > if_fwe0: <Ethernet over FireWire> on firewire0 > if_fwe0: Fake Ethernet address: 02:07:e9:70:f9:c4 > fwohci0: Initiate bus reset > fwohci0: BUS reset > fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > firewire0: bus manager 0 (me) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH5 UDMA100 controller> port > 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 irq 17 at device 31.1 on pci0 ata0: > at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > atapci1: <Intel ICH5 SATA150 controller> port > 0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 irq > 17 at device 31.2 on pci0 ata2: at 0xec00 on atapci1 > ata3: at 0xe400 on atapci1 > ichsmb0: <SMBus controller> port 0xc800-0xc81f irq 19 at device 31.3 on > pci0 pcm0: <Intel ICH5 (82801EB)> mem > 0xffaff400-0xffaff4ff,0xffaff800-0xffaff9ff irq 19 at device 31.5 on pci0 > pcm0: <Analog Devices AD1985 AC97 Codec> > acpi_button0: <Sleep Button> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port > 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0 fdc0: FIFO > enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A, console > ppc0 port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x100> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > APIC_IO: Testing 8254 interrupt delivery > APIC_IO: routing 8254 via IOAPIC #0 intpin 2 > > Timecounters tick every 10.000 msec > ipfw2 initialized, divert disabled, rule-based forwarding enabled, default > to deny, logging limited to 5000 packets/entry by default acpi_cpu: > throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acd0: DVDR > <MATSHITADVD-RAM LF-D521> at ata1-master UDMA66 > em0: Link is up 100 Mbps Full Duplex > ad4: 239372MB <Maxtor 7Y250M0> [486344/16/63] at ata2-master UDMA133 > SMP: AP CPU #1 Launched! > Mounting root from ufs:/dev/ad4s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200308250145.05635.david_colyer>