Date: Fri, 13 Feb 1998 09:54:56 -0600 From: Edwin Culp <eculp@ver1.telmex.net.mx> To: FreeBSD-multimedia@FreeBSD.ORG Subject: Re: PnP and PCM Message-ID: <34E46CD0.3CBE1A64@ver1.telmex.net.mx> References: <34E45BE2.E2CDC3B@ver1.telmex.net.mx>
next in thread | previous in thread | raw e-mail | index | archive | help
Please excuse the possible double post, but my mail doesn't seem to be
getting
out.
I'm running Current as of yesterday on a pentium II 233 with AMIBIOS
626HA13.
I cvsuped and made world because I couldn't get the sound going on a
ess1868
sound card that came with the machine and I couldn't apply the patch
2.2.5
cleanly from Luigi's driver.
I didn't help. The end result is that the patches didn't apply cleanly
so I backed them out, leaving only soundcard.h. I recompiled the kernel
again and the results of my dmesg, I hope, show that I am close but no
brass ring, yet:-) I am also attaching the kernel config lines that I
am using and the results of pnpinfo that I was't able to interpret
correctly,
I'm sure.
If anyone can tell me what I didn't read or do, because everything
points to
that, I would appreciate it. It, unfortunately, won't be the first time
I open
myself up for a little heat :-)
Thanks
ed
---------------------------------------------------------------
> Subject: dmesg
> >
> > Copyright (c) 1992-1998 FreeBSD Inc.
> > Copyright (c) 1982, 1986, 1989, 1991, 1993
> > The Regents of the University of California. All rights reserved.
> > FreeBSD 3.0-CURRENT #0: Thu Feb 12 19:31:34 CST 1998
> > root@webcafe.mexcom.net:/usr/src/sys/compile/OMAR
> > CPU: Pentium Pro (232.53-MHz 686-class CPU)
> > Origin = "GenuineIntel" Id = 0x634 Stepping=4
> > Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
> > real memory = 67108864 (65536K bytes)
> >
> > FreeBSD Kernel Configuration Utility - Version 1.1
> > Type "help" for help or "visual" to go to the visual
> > configuration interface (requires MGA/VGA display or
> > serial terminal capable of displaying ANSI graphics).
> > config> ls
> > Device port irq drq iomem iosize unit flags enab confl
> > fdc0 0x3f0 6 2 0 0 0 0 Yes No
> > wdc0 0x1f0 14 -1 0 0 0 0 Yes No
> > wdc1 0x170 15 -1 0 0 1 0 Yes No
> > sc0 0x60 1 -1 0 0 0 0 Yes No
> > sio0 0x3f8 4 -1 0 0 0 0 Yes No
> > sio1 0x2f8 3 -1 0 0 1 0 Yes No
> > pcm0 0xffffffff 7 1 0 0 0 0 Yes No <<CORRECT?>>
> > ed0 0x300 10 -1 0xd8000 0 0 0 Yes No
> > npx0 0xf0 13 -1 0 0 0 0 Yes No
> > config> pnp CSN LDN enable
> > bad csn/ldn 0:0 <<SOMETHING WRONG >>
> > config> pnp CSN LDN bios
> > bad csn/ldn 0:0 <<SYNTAX?>>
> > config> quit
> > avail memory = 62730240 (61260K bytes)
> > Probing for devices on PCI bus 0:
> > chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
> > chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
> > ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
> > vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 9 on pci0.9.0
> > Probing for PnP devices:
> > CSN 1 Vendor ID: ESS1868 [0x68187316] Serial 0xffffffff
> > This is an ESS1868, but LDN 1 is disabled <<THIS MUST BE PART OF THE PROBLEM>>
> > Probing for devices on the ISA bus:
> > sc0 at 0x60-0x6f irq 1 on motherboard
> > sc0: VGA color <16 virtual consoles, flags=0x0>
> > ed0 at 0x300-0x31f irq 10 on isa
> > ed0: address 00:40:05:24:b5:09, type NE2000 (16 bit)
> > sio0 at 0x3f8-0x3ff irq 4 on isa
> > sio0: type 16550A
> > sio1 at 0x2f8-0x2ff irq 3 on isa
> > sio1: type 16550A
> > pcm0 not found << RELATED TO LDN DISABLED ABOVE?>>
> > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
> > fdc0: FIFO enabled, 8 bytes threshold
> > fd0: 1.44MB 3.5in
> > wdc0 at 0x1f0-0x1f7 irq 14 on isa
> > wdc0: unit 0 (wd0): <QUANTUM BIGFOOT_CY4320A>
> > wd0: 4134MB (8467200 sectors), 8960 cyls, 15 heads, 63 S/T, 512 B/S
> > wdc0: unit 1 (atapi): <CRD-8240B/1.15>, removable, accel, dma, iordis
> > wcd0: 171/4125Kb/sec, 128Kb cache, audio play, 255 volume levels, ejectable tray
> > wcd0: no disc inside, unlocked, lock protected
> > wdc1 not found at 0x170
> > npx0 on motherboard
> > npx0: INT 16 interface
>
> ---------------------------------------------------------------
>
> Subject: Kernel Configuration file with pnp and pcm0
> >
> > # $Id: DNS,v 1.93 1997/07/22 08:33:52 jkh Exp $
> >
> > machine "i386"
> > cpu "I686_CPU"
>
> CUT
>
> > options USERCONFIG #boot -c editor
> > options VISUAL_USERCONFIG #visual boot -c editor
> >
> CUT
> >
> > controller pnp0
> > # device pcm0 at isa? port ? tty irq 7 drq 1 flags 0x0 vector pcmintr
> > device pcm0 at isa? port ? tty irq 7 drq 1 vector pcmintr
>
> ---------------------------------------------------------------
>
> Subject: pnpinfo complete.
> Checking for Plug-n-Play devices...
> >
> > Card assigned CSN #1
> > Vendor ID ESS1868 (0x68187316), Serial Number 0xffffffff
> > PnP Version 1.0, Vendor Version 16
> > Device Description: ESS ES1868 Plug and Play AudioDrive
> >
> > Logical Device ID: ESS0000 0x00007316 #0
> > I/O Range 0x800 .. 0xff8, alignment 0x8, len 0x8
> > [16-bit addr]
> >
> > Logical Device ID: ESS1868 0x68187316 #1
> > TAG Start DF
> > Good Configuration
> > DMA: channel(s) 1
> > 8-bit, not a bus master, count by byte, , Compatibility mode
> > DMA: channel(s) 0 3
> > 8-bit, not a bus master, count by byte, , Compatibility mode
> > IRQ: 5 - only one type (true/edge)
> > FIXED I/O base address 0x220 length 0x10
> > FIXED I/O base address 0x388 length 0x4
> > FIXED I/O base address 0x330 length 0x2
> > TAG Start DF
> > Acceptable Configuration
> > DMA: channel(s) 1
> > 8-bit, not a bus master, count by byte, , Compatibility mode
> > DMA: channel(s) 0 3
> > 8-bit, not a bus master, count by byte, , Compatibility mode
> > IRQ: 5 7 9 10 - only one type (true/edge)
> > I/O Range 0x220 .. 0x240, alignment 0x20, len 0x10
> > [16-bit addr]
> > FIXED I/O base address 0x388 length 0x4
> > I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
> > [16-bit addr]
> > TAG Start DF
> > Acceptable Configuration
> > DMA: channel(s) 0 1 3
> > 8-bit, not a bus master, count by byte, , Compatibility mode
> > DMA: channel(s) 0 1 3
> > 8-bit, not a bus master, count by byte, , Compatibility mode
> > IRQ: 5 7 9 10 11 12 - only one type (true/edge)
> > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
> > [16-bit addr]
> > FIXED I/O base address 0x388 length 0x4
> > I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
> > [16-bit addr]
> > TAG Start DF
> > Acceptable Configuration
> > DMA: channel(s) 0 1 3
> > 8-bit, not a bus master, count by byte, , Compatibility mode
> > DMA: channel(s) 0 1 3
> > 8-bit, not a bus master, count by byte, , Compatibility mode
> > IRQ: 5 7 9 10 11 12 - only one type (true/edge)
> > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
> > [16-bit addr]
> > FIXED I/O base address 0x388 length 0x4
> > I/O Range 0x800 .. 0xffe, alignment 0x2, len 0x2
> > [16-bit addr]
> > TAG Start DF
> > Sub-optimal Configuration
> > DMA: channel(s) 0 1 3
> > 8-bit, not a bus master, count by byte, , Compatibility mode
> > DMA: channel(s) 0 1 3
> > 8-bit, not a bus master, count by byte, , Compatibility mode
> > IRQ: 5 7 9 10 11 12 - only one type (true/edge)
> > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
> > [16-bit addr]
> > I/O Range 0x800 .. 0xffc, alignment 0x4, len 0x4
> > [16-bit addr]
> > I/O Range 0x800 .. 0xffe, alignment 0x2, len 0x2
> > [16-bit addr]
> > TAG End DF
> >
> > Logical Device ID: ESS0001 0x01007316 #2
> > TAG Start DF
> > Good Configuration
> > FIXED I/O base address 0x201 length 0x1
> > TAG Start DF
> > Acceptable Configuration
> > I/O Range 0x200 .. 0x20f, alignment 0x1, len 0x1
> > [16-bit addr]
> > TAG End DF
> > Compatible Device ID: PNPb02f (2fb0d041)
> >
> > Logical Device ID: ESS0002 0x02007316 #3
> > TAG Start DF
> > Good Configuration
> > IRQ: 12 - only one type (true/edge)
> > FIXED I/O base address 0x168 length 0x8
> > FIXED I/O base address 0x36e length 0x2
> > TAG Start DF
> > Acceptable Configuration
> > IRQ: 10 11 - only one type (true/edge)
> > FIXED I/O base address 0x168 length 0x8
> > FIXED I/O base address 0x36e length 0x2
> > TAG Start DF
> > Acceptable Configuration
> > IRQ: 10 11 12 - only one type (true/edge)
> > FIXED I/O base address 0x1e8 length 0x8
> > FIXED I/O base address 0x3ee length 0x2
> > TAG Start DF
> > Sub-optimal Configuration
> > IRQ: 10 11 12 - only one type (true/edge)
> > I/O Range 0x100 .. 0x1f8, alignment 0x8, len 0x8
> > [16-bit addr]
> > I/O Range 0x300 .. 0x3fe, alignment 0x2, len 0x2
> > [16-bit addr]
> > TAG End DF
> > Compatible Device ID: PNP0600 (0006d041)
> > End Tag
> >
> > Successfully got 67 resources, 4 logical fdevs
> > -- card select # 0x0001
> >
> > CSN ESS1868 (0x68187316), Serial Number 0xffffffff
> >
> > Logical device #0
> > IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
> > IRQ 0 0
> > DMA 4 4
> > IO range check 0x00 activate 0x00
> >
> > Logical device #1
> > IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
> > IRQ 0 0
> > DMA 4 4
> > IO range check 0x00 activate 0x00
> >
> > Logical device #2
> > IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
> > IRQ 0 0
> > DMA 4 4
> > IO range check 0x00 activate 0x00
> >
> > Logical device #3
> > IO: 0x0168 0x036e 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
> > IRQ 11 0
> > DMA 4 4
> > IO range check 0x00 activate 0x01
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?34E46CD0.3CBE1A64>