Date: Tue, 01 May 2018 18:23:35 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 227904] boot fail with 20180426 RPI2 image Message-ID: <bug-227904-227@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D227904 Bug ID: 227904 Summary: boot fail with 20180426 RPI2 image Product: Base System Version: CURRENT Hardware: arm OS: Any Status: New Severity: Affects Many People Priority: --- Component: kern Assignee: bugs@FreeBSD.org Reporter: bobf@mrp3.com RPi2 20180426 image, as downloaded, fails to boot. This problem also appea= rs when kernel+world is installed from -CURRENT obtained on 4/27. An earlier version, dated 03/29, was able to boot successfully on the same hardware. image file: FreeBSD-12.0-CURRENT-arm-armv7-RPI2-20180426-r333017.img 1. downloaded and transferred image to SD card with dd 2. booted SD card on RPi 2B with bcm2836 CPU 3. observed the following output on the serial port: U-Boot 2018.03 (Apr 26 2018 - 16:58:25 +0000) DRAM: 948 MiB RPI 2 Model B (0xa01041) MMC: sdhci@7e300000: 0 Loading Environment from FAT... *** Warning - bad CRC, using default environment Failed (-5) In: serial Out: vidconsole Err: vidconsole Net: No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0=20 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr 199 bytes read in 9 ms (21.5 KiB/s) ## Executing script at 02000000 238896 bytes read in 31 ms (7.3 MiB/s) ## Starting application at 0x01000000 ... Consoles: U-Boot console=20=20 Compatible U-Boot API signature found @0x3af56a90 FreeBSD/armv7 U-Boot loader, Revision 1.2 (Thu Apr 26 18:25:40 UTC 2018 root@releng3.nyi.freebsd.org) DRAM: 948MB Number of U-Boot devices: 1 U-Boot env: loaderdev not set, will probe all devices. Found U-Boot device: disk Probing all disk devices... Checking unit=3D0 slice=3D<auto> partition=3D<auto>... good. Booting from disk0s2a: Loading /boot/defaults/loader.conf /boot/kernel/kernel data=3D0x8bf97c+0x1dc684 syms=3D[0x4+0x99d30+0x4+0xdf5b= 5] | Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]...=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20 /boot/dtb/bcm2836-rpi-2-b.dtb size=3D0x4c49 Loaded DTB from file 'bcm2836-rpi-2-b.dtb'. Kernel entry at 0x1200100... Kernel args: (null) KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-CURRENT #0 r333017: Thu Apr 26 18:37:21 UTC 2018 root@releng3.nyi.freebsd.org:/usr/obj/usr/src/arm.armv7/sys/GENERIC arm FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) WARNING: WITNESS option enabled, expect reduced performance. VT: init without driver. module_register: cannot register simplebus/ahci from kernel; already loaded from kernel Module simplebus/ahci failed to register: 17 module_register: cannot register simplebus/ehci from kernel; already loaded from kernel Module simplebus/ehci failed to register: 17 module_register: cannot register simplebus/pcib from kernel; already loaded from kernel Module simplebus/pcib failed to register: 17 module_register: cannot register simplebus/ehci from kernel; already loaded from kernel Module simplebus/ehci failed to register: 17 CPU: ARM Cortex-A7 r0p5 (ECO: 0x00000000) CPU Features:=20 Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, VMSAv7, PXN, LPAE, Coherent Walk Optional instructions:=20 SDIV/UDIV, UMULL, SMULL, SIMD(ext) LoUU:2 LoC:3 LoUIS:2=20 Cache level 1: 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc 32KB/32B 2-way instruction cache Read-Alloc Cache level 2: 512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc real memory =3D 994045952 (947 MB) avail memory =3D 955293696 (911 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs arc4random: no preloaded entropy cache random: entropy device external interface kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 ofw_clkbus0: <OFW clocks bus> on ofwbus0 clk_fixed0: <Fixed clock> on ofw_clkbus0 clk_fixed1: <Fixed clock> on ofw_clkbus0 local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: another root already set intc0: could not set PIC as a root device_attach: intc0 attach returned 6 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: could not allocate memory resource device_attach: intc0 attach returned 6 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: could not allocate memory resource device_attach: intc0 attach returned 6 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,2= 9,30 on simplebus0 gpio0: cannot allocate resources gpio0: bcm_gpio_pic_detach: not implemented yet device_attach: gpio0 attach returned 6 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: could not allocate memory resource device_attach: intc0 attach returned 6 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,2= 9,30 on simplebus0 device_attach: gpio0 attach returned 6 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: could not allocate memory resource device_attach: intc0 attach returned 6 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,2= 9,30 on simplebus0 device_attach: gpio0 attach returned 6 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: could not allocate memory resource device_attach: intc0 attach returned 6 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,2= 9,30 on simplebus0 device_attach: gpio0 attach returned 6 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: could not allocate memory resource device_attach: intc0 attach returned 6 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,2= 9,30 on simplebus0 device_attach: gpio0 attach returned 6 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 generic_timer0: could not allocate resources device_attach: generic_timer0 attach returned 6 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: could not allocate memory resource device_attach: intc0 attach returned 6 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,2= 9,30 on simplebus0 device_attach: gpio0 attach returned 6 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 generic_timer0: could not allocate resources device_attach: generic_timer0 attach returned 6 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: could not allocate memory resource device_attach: intc0 attach returned 6 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,2= 9,30 on simplebus0 device_attach: gpio0 attach returned 6 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 generic_timer0: could not allocate resources device_attach: generic_timer0 attach returned 6 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: could not allocate memory resource device_attach: intc0 attach returned 6 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,2= 9,30 on simplebus0 device_attach: gpio0 attach returned 6 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 generic_timer0: could not allocate resources device_attach: generic_timer0 attach returned 6 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: could not allocate memory resource device_attach: intc0 attach returned 6 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,2= 9,30 on simplebus0 device_attach: gpio0 attach returned 6 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 generic_timer0: could not allocate resources device_attach: generic_timer0 attach returned 6 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: could not allocate memory resource device_attach: intc0 attach returned 6 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,2= 9,30 on simplebus0 device_attach: gpio0 attach returned 6 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 generic_timer0: could not allocate resources device_attach: generic_timer0 attach returned 6 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: could not allocate memory resource device_attach: intc0 attach returned 6 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,2= 9,30 on simplebus0 device_attach: gpio0 attach returned 6 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 generic_timer0: could not allocate resources device_attach: generic_timer0 attach returned 6 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: could not allocate memory resource device_attach: intc0 attach returned 6 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,2= 9,30 on simplebus0 device_attach: gpio0 attach returned 6 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 generic_timer0: could not allocate resources device_attach: generic_timer0 attach returned 6 bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24 on simplebus0 bcm_dma0: cannot allocate interrupt device_attach: bcm_dma0 attach returned 6 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 25 on simplebus0 intc0: could not allocate memory resource device_attach: intc0 attach returned 6 bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100027 on simplebus0 bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f on simplebus0 mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 26 on simplebus0 mbox0: could not allocate interrupt resource device_attach: mbox0 attach returned 6 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 27,28,2= 9,30 on simplebus0 device_attach: gpio0 attach returned 6 uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e201fff irq 31 on simpleb= us0 uart0: console (115200,n,8,1) spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e204fff irq 33 on simplebus0 spi0: cannot allocate interrupt device_attach: spi0 attach returned 6 iichb0: <BCM2708/2835 BSC controller> mem 0x7e205000-0x7e205fff irq 34 on simplebus0 iichb0: cannot allocate interrupt device_attach: iichb0 attach returned 6 sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq = 41 on simplebus0 device_attach: sdhci_bcm0 attach returned 6 iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 44 on simplebus0 iichb0: cannot allocate interrupt device_attach: iichb0 attach returned 6 iichb0: <BCM2708/2835 BSC controller> mem 0x7e805000-0x7e805fff irq 45 on simplebus0 iichb0: cannot allocate interrupt device_attach: iichb0 attach returned 6 bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff irq 50 on simplebus0 bcm283x_dwcotg0: failed to set power state, err=3D6 device_attach: bcm283x_dwcotg0 attach returned 6 vchiq0: <BCM2835 VCHIQ> mem 0x7e00b840-0x7e00b84e irq 52 on simplebus0 vchiq0: could not allocate interrupt resource device_attach: vchiq0 attach returned 6 fb0: <BCM2835 VT framebuffer driver> on simplebus0 device_attach: fb0 attach returned 6 pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0 pmu0: could not allocate resources device_attach: pmu0 attach returned 6 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 generic_timer0: could not allocate resources device_attach: generic_timer0 attach returned 6 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 bcm2835_cpufreq0: <CPU Frequency Control> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 cpu2: <Open Firmware CPU> on cpulist0 cpu3: <Open Firmware CPU> on cpulist0 gpioled0: <GPIO LEDs> on ofwbus0 gpioled0: <ACT> failed to map pin gpioled0: <PWR> failed to map pin cryptosoft0: <software crypto> panic: No usable event timer found! cpuid =3D 0 time =3D 1 KDB: stack backtrace: db_trace_self() at db_trace_self pc =3D 0xc05e23a0 lr =3D 0xc00cf92c (db_trace_self_wrapper+0x30) sp =3D 0xc0d13ce0 fp =3D 0xc0d13df8 db_trace_self_wrapper() at db_trace_self_wrapper+0x30 pc =3D 0xc00cf92c lr =3D 0xc02e3338 (vpanic+0x16c) sp =3D 0xc0d13e00 fp =3D 0xc0d13e20 r4 =3D 0x00000100 r5 =3D 0x00000001 r6 =3D 0xc0771ef8 r7 =3D 0xc09cbfa8 vpanic() at vpanic+0x16c pc =3D 0xc02e3338 lr =3D 0xc02e33d0 (kproc_shutdown) sp =3D 0xc0d13e28 fp =3D 0xc0d13e2c r4 =3D 0xc0a453b4 r5 =3D 0xc0a453d8 r6 =3D 0x00000001 r7 =3D 0xc0a4957c r8 =3D 0x7fffffff r9 =3D 0xffffffff r10 =3D 0xc2eb0d80 kproc_shutdown() at kproc_shutdown pc =3D 0xc02e33d0 lr =3D 0xc061240c (timercb) sp =3D 0xc0d13e34 fp =3D 0xc0d13e60 r4 =3D 0xc02e33d0 r5 =3D 0xc0d13e34 timercb() at timercb pc =3D 0xc061240c lr =3D 0xc028307c (initclocks+0x2c) sp =3D 0xc0d13e68 fp =3D 0xc0d13e68 r4 =3D 0xc0a48b6c r5 =3D 0x00000001 r6 =3D 0xc08b3c38 r7 =3D 0x00000000 r8 =3D 0xc0a48b68 r9 =3D 0xc08b4d78 r10 =3D 0xc0a48a70 initclocks() at initclocks+0x2c pc =3D 0xc028307c lr =3D 0xc027fb68 (mi_startup+0x18c) sp =3D 0xc0d13e70 fp =3D 0xc0d13e90 mi_startup() at mi_startup+0x18c pc =3D 0xc027fb68 lr =3D 0xc0000244 (_start+0x144) sp =3D 0xc0d13e98 fp =3D 0x00000000 r4 =3D 0xc0000378 r5 =3D 0xc0a98000 r6 =3D 0x0000000e r7 =3D 0x00c52078 r8 =3D 0xc0c21000 r9 =3D 0x3ebfa800 r10 =3D 0x00000040 _start() at _start+0x144 pc =3D 0xc0000244 lr =3D 0xc0000244 (_start+0x144) sp =3D 0xc0d13e98 fp =3D 0x00000000 KDB: enter: panic [ thread pid 0 tid 100000 ] Stopped at $d.3: ldrb r15, [r15, r15, ror r15]! db> --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-227904-227>